NJ WTB:manifolds,fan,fuel line,axle mounts,etc. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67gmcstepside · 09-16-2010, 08:00 AM

Getting down to the nitty-gritty of getting my 67 V8 4x4 running. The last few parts I am looking for are as follows:

67-72 straight dump exhaust manifolds
clutch or regular cooling fan
steal fuel line - 2 barrel carb - fuel pump to carb
1/2 ton front and back u-bolts and top plate to mount axles to 2.5 inch wide leafs.
Any help would be apprecated, thanks,
Don

Hottrucks · 09-16-2010, 08:21 AM

I have the exhaust manifolds your looking for...I can't post a pic of them but they're really clean, new studs and no polution ports...with a wire brush and a coat of paint they would be very nice..not sure what there worth they have a 90* bent piece of exhaust on them now about 12/16" long if you want that too...I'm in 03748 if you want to figure shipping

Jeff

novafrog · 09-16-2010, 09:08 AM

here is a new set of aftermarkets,pm me if you want more info,thanks

**D.PASSMORE** · 09-16-2010, 09:10 AM

I have:
OE 67-72 straight dump exhaust manifolds
clutch or regular cooling fan
1/2 ton front and back u-bolts and top plate to mount axles to 2.5 inch wide leafs

I'll post pic tonight.

67gmcstepside · 09-16-2010, 10:35 AM

No need to go through the trouble for pics, I have had nothing but good experinces with people on this site. What would you want for all the goodies shipped to NJ 08527.
Thank you!!

Quote:

Originally Posted by D.PASSMORE

I have:
OE 67-72 straight dump exhaust manifolds
clutch or regular cooling fan
1/2 ton front and back u-bolts and top plate to mount axles to 2.5 inch wide leafs

I'll post pic tonight.

67gmcstepside · 09-16-2010, 10:35 AM

Novafrog, they would probally be out of my price range but thnk you never the less.

**D.PASSMORE** · 09-16-2010, 02:05 PM

Here is a few pics that I dug up: prices dose not include shipping.
1. OE Exhaust manifilods $25.00 set
2. 1/2 T spring Mounting brackets F/R. They have been sandblasted, epoxy primed and poly 2K gloss black. I'll throw in the steering arm - $65.00.
3. I have clutch with fan or just fan for clutch mount. Which would you like? No picture right now.
4. Might have a steel carb line, I'll look tonight.

Thanks David

**D.PASSMORE** · 09-16-2010, 06:41 PM

Would you have a picture of a 2wd steel fuel line? I have 2 different kinds for our trucks.
LMK about fan. Thanks

67gmcstepside · 09-16-2010, 07:39 PM

clutch with fan please and not sure what fuel line I would need so make a best guess but I am good for manifolds. The back u-bolts need to be 3 inch inside and the front 2 3/4.

**D.PASSMORE** · 09-16-2010, 09:34 PM

Alright, let me get a picture of fan and fuel line. If you approve, I'll get them out to you. Shipping would be to: jackson ??
The spring mounts and u-bolts are all OE stock 67-72 4x4 equipment. Do you have stock 1/2 T axles under the frame?

67gmcstepside · 09-17-2010, 07:55 AM

Do you have stock 1/2 T axles under the frame?

No, The truck original had 3/4 8 lug axles. Ho52 and close knuckle Dana 44 in the front. I am going with 1972 1/2 ton blazer axles. Shipping would be to Jackson, NJ 08527. Thank you VERY much. Dying to get this truck done.

**D.PASSMORE** · 09-17-2010, 08:27 AM

Great these are for a 1/2 T axles!
The clutch & fan is - $20.00 and Fuel line is - $10.00. Both are in good shape.
I'll get a shipping quote and pictures this weekend.

Hottrucks · 09-17-2010, 10:40 AM

you do relize we need pics!!

Hottrucks · 09-17-2010, 12:38 PM

sorry I it was aimed at 67gmcstepside...lets see your truck

67gmcstepside · 09-17-2010, 03:08 PM

Honesty, I am good without pics, just tell me total and payment method.

http://67-72chevytrucks.com/vboard/s...d.php?t=409234

My build, a few pics.

67gmcstepside · 09-18-2010, 03:43 PM

Dave, any word?

**D.PASSMORE** · 09-19-2010, 12:41 PM

PM sent.

67gmcstepside · 09-28-2010, 10:27 PM

Recieved all the parts and they are GREAT!!! Thank you!!!

09-16-2010, 08:00 AM	#1
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	WTB:manifolds,fan,fuel line,axle mounts,etc. Getting down to the nitty-gritty of getting my 67 V8 4x4 running. The last few parts I am looking for are as follows: 67-72 straight dump exhaust manifolds clutch or regular cooling fan steal fuel line - 2 barrel carb - fuel pump to carb 1/2 ton front and back u-bolts and top plate to mount axles to 2.5 inch wide leafs. Any help would be apprecated, thanks, Don

09-16-2010, 08:21 AM	#2
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. I have the exhaust manifolds your looking for...I can't post a pic of them but they're really clean, new studs and no polution ports...with a wire brush and a coat of paint they would be very nice..not sure what there worth they have a 90* bent piece of exhaust on them now about 12/16" long if you want that too...I'm in 03748 if you want to figure shipping Jeff __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

09-16-2010, 09:08 AM	#3
novafrog Registered User Join Date: Apr 2009 Location: dunlow wv Posts: 435	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. here is a new set of aftermarkets,pm me if you want more info,thanks Last edited by novafrog; 10-18-2010 at 07:13 PM.

09-16-2010, 09:10 AM	#4
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,049	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. I have: OE 67-72 straight dump exhaust manifolds clutch or regular cooling fan 1/2 ton front and back u-bolts and top plate to mount axles to 2.5 inch wide leafs I'll post pic tonight. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie) Last edited by D.PASSMORE; 09-16-2010 at 09:10 AM.

09-16-2010, 10:35 AM	#6
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. Novafrog, they would probally be out of my price range but thnk you never the less.

09-16-2010, 02:05 PM	#7
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,049	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. Here is a few pics that I dug up: prices dose not include shipping. 1. OE Exhaust manifilods $25.00 set 2. 1/2 T spring Mounting brackets F/R. They have been sandblasted, epoxy primed and poly 2K gloss black. I'll throw in the steering arm - $65.00. 3. I have clutch with fan or just fan for clutch mount. Which would you like? No picture right now. 4. Might have a steel carb line, I'll look tonight. Thanks David Attached Images __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

09-16-2010, 06:41 PM	#8
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,049	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. Would you have a picture of a 2wd steel fuel line? I have 2 different kinds for our trucks. LMK about fan. Thanks

09-16-2010, 07:39 PM	#9
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. clutch with fan please and not sure what fuel line I would need so make a best guess but I am good for manifolds. The back u-bolts need to be 3 inch inside and the front 2 3/4. Last edited by 67gmcstepside; 09-16-2010 at 07:44 PM.

09-16-2010, 09:34 PM	#10
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,049	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. Alright, let me get a picture of fan and fuel line. If you approve, I'll get them out to you. Shipping would be to: jackson ?? The spring mounts and u-bolts are all OE stock 67-72 4x4 equipment. Do you have stock 1/2 T axles under the frame?

09-17-2010, 07:55 AM	#11
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. Do you have stock 1/2 T axles under the frame? No, The truck original had 3/4 8 lug axles. Ho52 and close knuckle Dana 44 in the front. I am going with 1972 1/2 ton blazer axles. Shipping would be to Jackson, NJ 08527. Thank you VERY much. Dying to get this truck done.

09-17-2010, 08:27 AM	#12
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,049	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. Great these are for a 1/2 T axles! The clutch & fan is - $20.00 and Fuel line is - $10.00. Both are in good shape. I'll get a shipping quote and pictures this weekend.

09-17-2010, 10:40 AM	#13
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. you do relize we need pics!! __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

09-17-2010, 12:38 PM	#14
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. sorry I it was aimed at 67gmcstepside...lets see your truck Last edited by Hottrucks; 09-17-2010 at 12:38 PM.

09-17-2010, 03:08 PM	#15
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. Honesty, I am good without pics, just tell me total and payment method. http://67-72chevytrucks.com/vboard/s...d.php?t=409234 My build, a few pics. Last edited by 67gmcstepside; 09-17-2010 at 03:10 PM.

09-18-2010, 03:43 PM	#16
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. Dave, any word?



Register or Log In To remove these advertisements.

09-19-2010, 12:41 PM	#17
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,049	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. PM sent.

09-28-2010, 10:27 PM	#18
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: WTB:manifolds,fan,fuel line,axle mounts,etc. Recieved all the parts and they are GREAT!!! Thank you!!!

Register or Log In To remove these advertisements.