NY 91 6.2 diesel engine for parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

656mx · 07-01-2015, 09:08 PM

Pulling the 6.2 out of my crew cab and putting a cummins in. Figured i'd offer it here for parts before it goes for scrap. Still in truck and running at the moment but does have a bad head gasket or head. No antifreeze in the oil. Complete air cleaner to pan. Just keeping alt and ac compressor. $300obo pick up only

qksilver · 07-01-2015, 09:25 PM

man, just bought a 3/4 that needs a 6.2.........thinking.............no I am going to stay with the plan, 454 TBI. sorry , there is just something about a 6.2/700r and that something is 26 MPG and no power!

zaccaglin · 07-03-2015, 01:33 AM

If you decide to part it out before scrapping, let me know, I'd be interested in the injector pump, air filter box (don't need lid), and tach sensor if it has a tachometer.

656mx · 07-03-2015, 08:30 AM

Quote:

Originally Posted by zaccaglin

If you decide to part it out before scrapping, let me know, I'd be interested in the injector pump, air filter box (don't need lid), and tach sensor if it has a tachometer.

Parting it is a option if no one wants it. Pulling it today so I will let you know.

**special-K** · 07-04-2015, 10:22 PM

Are you using the GM fuel filter/separator/bleeder?

656mx · 07-04-2015, 11:05 PM

Quote:

Originally Posted by special-K

Are you using the GM fuel filter/separator/bleeder?

Nope not using it. If you want it does $20 shipped sound ok?

**special-K** · 07-05-2015, 07:27 AM

Sounds good. Was this a running motor? I need this to replace a cracked one. If this one was cracked you would know if you've seen it run. Sucks in air causing start issues. It's only 20 buck but would be nice to know if you know.

656mx · 07-05-2015, 10:45 AM

Quote:

Originally Posted by special-K

Sounds good. Was this a running motor? I need this to replace a cracked one. If this one was cracked you would know if you've seen it run. Sucks in air causing start issues. It's only 20 buck but would be nice to know if you know.

The truck ran and drove fine. Would start up instantly. Just had a bad head gasket. My ebay id is dini8402 if you would like to see some feedback.

**special-K** · 07-05-2015, 01:21 PM

No, I trust you. Just had to ask. Many are cracked and if the truck came to you busted you wouldn't even know. When mine messed up I had to do the bleed-out routine anytime it sat a while. I rigged a different set-up with a spin-on for it but bleeding is messy. I've actually sold it to a guy in NH, just have to get it up there. I'd like to give this to him so he can change it back if he wants.
Price is reasonable enough for sure, so I'll take it. Could you PM your info for me to send a postal money order, if that works for you?

656mx · 08-18-2015, 02:44 PM

Going to part out the motor. If there's something on it you want let me know. Shipping will be exactly what it cost me and I will take paypal

zaccaglin · 09-02-2015, 09:42 AM

I desperately need the power steering mounting bracket (just broke mine), and I'm also interested in the injector pump, air filter box (don't need lid), and tach sensor if it has a tachometer.

zaccaglin · 09-03-2015, 06:55 PM

Would also be interested in the Coolant Crossover pipe.

656mx · 09-11-2015, 10:45 AM

Zaccaglin PM returned. Sorry for late response. Still have it. The injection pump is a newer reman. I'll do $150 shipped for pump, crossover pipe, power steering brackets, and air cleaner.

zaccaglin · 09-12-2015, 01:29 AM

Quote:

Originally Posted by 656mx

Zaccaglin PM returned. Sorry for late response. Still have it. The injection pump is a newer reman. I'll do $150 shipped for pump, crossover pipe, power steering brackets, and air cleaner.

Ten four. I would only need the PS bracket that bolts to he pump itself. Pm me with preferred payment. I do PayPal regularly.

656mx · 09-12-2015, 01:38 PM

PM sent

48cj2a · 09-12-2015, 08:33 PM

How much for all the cruise control componets and mounting hardware? Wanting to add cruise to a 6.2 that has never had it so need everything from the harness, vacuum lines, dash module with bracket and screws, brake pedal switches and under hood pieces and IP linkage.

656mx · 09-14-2015, 07:40 PM

Quote:

Originally Posted by 48cj2a

How much for all the cruise control componets and mounting hardware? Wanting to add cruise to a 6.2 that has never had it so need everything from the harness, vacuum lines, dash module with bracket and screws, brake pedal switches and under hood pieces and IP linkage.

I can only sell whats on the motor right now. I haven't got into the wiring yet.

48cj2a · 09-14-2015, 08:55 PM

Just so you know the wiring and vacuum lines are a separate little harness and not part of the factory main wiring harness. connections and linkage at the module on the intake and thru the fiewall to a black box module with bracket, brake switch, turn signal switch and a connector to the fuse box and ground.

zaccaglin · 09-20-2015, 10:35 PM

Payment sent.

656mx · 09-22-2015, 05:09 PM

Quote:

Originally Posted by zaccaglin

Payment sent.

Shipped thank you. I will pm tracking number

zaccaglin · 09-26-2015, 02:08 AM

Received the parts today, Thanks!

However, it looks like I may need the power steering pump resistor as well.

656mx · 09-26-2015, 09:34 AM

Quote:

Originally Posted by zaccaglin

Received the parts today, Thanks!

However, it looks like I may need the power steering pump resistor as well.

Ok but Im not sure what part your looking for? A resistor is electrical. Let me know

zaccaglin · 09-26-2015, 03:33 PM

Quote:

Originally Posted by 656mx

Ok but Im not sure what part your looking for? A resistor is electrical. Let me know

Reservoir damn iPad spellcheck.

zaccaglin · 10-04-2015, 12:04 PM

Still interested.

656mx · 10-04-2015, 04:11 PM

Quote:

Originally Posted by zaccaglin

Still interested.

$15 shipped. I can send it tomorrow if you want it

07-01-2015, 09:08 PM	#1
656mx Registered User Join Date: Sep 2014 Location: dutchess county NY Posts: 60	91 6.2 diesel engine for parts Pulling the 6.2 out of my crew cab and putting a cummins in. Figured i'd offer it here for parts before it goes for scrap. Still in truck and running at the moment but does have a bad head gasket or head. No antifreeze in the oil. Complete air cleaner to pan. Just keeping alt and ac compressor. $300obo pick up only

07-01-2015, 09:25 PM	#2
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 91 6.2 diesel engine for parts man, just bought a 3/4 that needs a 6.2.........thinking.............no I am going to stay with the plan, 454 TBI. sorry , there is just something about a 6.2/700r and that something is 26 MPG and no power!

07-03-2015, 01:33 AM	#3
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: 91 6.2 diesel engine for parts If you decide to part it out before scrapping, let me know, I'd be interested in the injector pump, air filter box (don't need lid), and tach sensor if it has a tachometer. __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

07-04-2015, 10:22 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 91 6.2 diesel engine for parts Are you using the GM fuel filter/separator/bleeder? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-05-2015, 07:27 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 91 6.2 diesel engine for parts Sounds good. Was this a running motor? I need this to replace a cracked one. If this one was cracked you would know if you've seen it run. Sucks in air causing start issues. It's only 20 buck but would be nice to know if you know. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-05-2015, 01:21 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 91 6.2 diesel engine for parts No, I trust you. Just had to ask. Many are cracked and if the truck came to you busted you wouldn't even know. When mine messed up I had to do the bleed-out routine anytime it sat a while. I rigged a different set-up with a spin-on for it but bleeding is messy. I've actually sold it to a guy in NH, just have to get it up there. I'd like to give this to him so he can change it back if he wants. Price is reasonable enough for sure, so I'll take it. Could you PM your info for me to send a postal money order, if that works for you? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-18-2015, 02:44 PM	#10
656mx Registered User Join Date: Sep 2014 Location: dutchess county NY Posts: 60	Re: 91 6.2 diesel engine for parts Going to part out the motor. If there's something on it you want let me know. Shipping will be exactly what it cost me and I will take paypal

09-02-2015, 09:42 AM	#11
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: 91 6.2 diesel engine for parts I desperately need the power steering mounting bracket (just broke mine), and I'm also interested in the injector pump, air filter box (don't need lid), and tach sensor if it has a tachometer. __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

09-03-2015, 06:55 PM	#12
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: 91 6.2 diesel engine for parts Would also be interested in the Coolant Crossover pipe. __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

09-11-2015, 10:45 AM	#13
656mx Registered User Join Date: Sep 2014 Location: dutchess county NY Posts: 60	Re: 91 6.2 diesel engine for parts Zaccaglin PM returned. Sorry for late response. Still have it. The injection pump is a newer reman. I'll do $150 shipped for pump, crossover pipe, power steering brackets, and air cleaner.

09-12-2015, 01:38 PM	#15
656mx Registered User Join Date: Sep 2014 Location: dutchess county NY Posts: 60	Re: 91 6.2 diesel engine for parts PM sent

09-12-2015, 08:33 PM	#16
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: 91 6.2 diesel engine for parts How much for all the cruise control componets and mounting hardware? Wanting to add cruise to a 6.2 that has never had it so need everything from the harness, vacuum lines, dash module with bracket and screws, brake pedal switches and under hood pieces and IP linkage. __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A

09-14-2015, 08:55 PM	#18
48cj2a Registered User Join Date: Feb 2010 Location: Central, IL Posts: 599	Re: 91 6.2 diesel engine for parts Just so you know the wiring and vacuum lines are a separate little harness and not part of the factory main wiring harness. connections and linkage at the module on the intake and thru the fiewall to a black box module with bracket, brake switch, turn signal switch and a connector to the fuse box and ground. __________________ 03 Suburban Z71 Z71 98 GMC Yukon SLT 4x4 Yukon 86 M1009 CUCV Project Milverado 48 Willys CJ2A 48CJ2A

09-20-2015, 10:35 PM	#19
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: 91 6.2 diesel engine for parts Payment sent. __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

09-26-2015, 02:08 AM	#21
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: 91 6.2 diesel engine for parts Received the parts today, Thanks! However, it looks like I may need the power steering pump resistor as well. __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208



Register or Log In To remove these advertisements.

10-04-2015, 12:04 PM	#24
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: 91 6.2 diesel engine for parts Still interested. __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

Register or Log In To remove these advertisements.