the "quick" turnaround

[PowerdbyChevy79]

Whats up brothers..well i finally got my finger outta my a&$ and made a build thread for 68...so here is Betty.
shes a 1968 swb.. i bought her from an old man in Livingston ,Tx for $600 at the beginning of 2013...really didnt do much to her till about Nov 2013..she came with a 305 (but it was suppose to be a 350)/350 tranny...plan was to change all the fluids, put a fresh battery and fire her up.then get her on the road asap you know.. a "quick " turnaround...ya.. that was the plan.
Well as we all know with these trucks ...the more you dig the more crap pops up... found the block wasnt a 350..PO had broke the mounting ear where the starter goes...i wanted to pull the clip to freshen up the engine bay...found the firewall was in bad shape...pulled carpet....that was no bueno...and my favorite...cab corners had been rotted out so they decided to just pour fiberglass mix from the inside and just shape it from the outside and oh yea...rockers were rotted out and they used spray foam to fill in the gaps and shaped it.. but hey i paid "only" $600 bucks..well after a month of fighting it.. i caved to my OCD and decided to go full restoration..so.. here we go...
this here is a 355 4 bolt main with a 700 tranny i had from my old shorty van..good strong engine gonna make her a 383..

[PowerdbyChevy79]

i bought a rusted out 71 longbed as a parts truck.. pulled the 5 lug suspension and the dash..decided to make her an A/C cab...painted the back side with por15...
in Feb took the cab to the body shop to get the cab corners,rockers,drip rails,above the windshield and firewall replaced..
frame looked lonely and dirty....

[PowerdbyChevy79]

worked on tearing down the frame to get ready for the por15.. had a hard time deciding which way to go on the frame..powdercoat or por15..heard both sides of the table on this...decided to go por15 because shes gonna be a daily driver/workhorse...and the por15 will be easier to touch up and its way cheaper.. if she was gonna be a weekend warrior only..i wouldve went powdercoat..

here i was getting the frame ready with the metal prep

[PowerdbyChevy79]

started paing with por15..decided to go with John Deere Blitz Black..i tell you what i am pretty happy how it turned out..

heres after the topcoat..

this was the my first time painting something this big with por15..made some mistakes..had some runs...but overall i was pleased..

[PowerdbyChevy79]

painted the rest of my suspension pieces...

[PowerdbyChevy79]

here is where im at now..come a long way.. but i still got a way to go.....right now im waiting on my ECE drop kit to come in.. so i can get her to roller status.. cab is still at body shop..body man is starting to test my patience..hes been putting other jobs ahead of mine...imma give him another month if he hasnt done n e thing imma pull my cab and take it somewhere else..

[PowerdbyChevy79]

this is what has gotten me side tracked.. a nice 65 c10..gonna make her a swb with a fire damaged truck that came as part of the deal..check out her build in the 60-66 project section..

[SuperC10Tex]

Hitting it hard.....I like your work Sir!!!!

[PowerdbyChevy79]

Originally Posted by SuperC10Tex

Hitting it hard.....I like your work Sir!!!!

Thanks brother....

[POPO1984]

I live not to far from that body shop. I saw that cab out there. How did they do on it.

[mcbassin]

Glad to see you put together a build thread. You have gotten down and dirty on the chassis.
Looking forward to following along here.
subscribed.

[Bennett68C10]

Been following on Instagram for a while, good to see you started a build thread on here. Frame looks great, I'm subscribed for updates.