Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-06-2004, 02:31 PM | #1 |
ran out of money
Join Date: Apr 2003
Location: northern, NJ
Posts: 925
|
Ot whats a disk set up worth?
I have a stock disk set-up from my 71 chevy. it is complete with rotors calipers and spindles. other then being dirty it is fine never had a problem with it. I was wondering what this might be worth?
Thanks Rat
__________________
Modify everything, leave nothing alone!~ |
12-07-2004, 01:58 PM | #2 |
Hittin E-Z Street on Mud Tires
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
I paid $150 for the same set up plus the crossmember, upper and lower A arms, coil springs, brake lines, power booster and master cylinder off a 71 GMC in a junkyard. I then spent $300 on rebuilding it....replaced rotors, calipers, ball joints, tie rods, bushings, etc...... I'd say maybe $100... It will still need to be rebuilt.
|
12-07-2004, 03:04 PM | #3 |
Senior Member
Join Date: Jul 2003
Location: Indianapolis, IN
Posts: 1,277
|
I sold a crossmember and all the goodies except the M/C for scrap this summer. I couldn't give it away. Good luck
|
12-07-2004, 03:58 PM | #4 |
Registered User
Join Date: Dec 2002
Location: Tampa
Posts: 1,191
|
Because of the weight, shipping kills you on this stuff. I gave away a crossmember with dropped springs, disc brakes, and the power gear box just to get rid of it to someone who might use it. Everything as far as the brakes and suspension had less than 3000 miles on it.
__________________
'68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc |
Bookmarks |
|
|