12 bolt rear - open carrier 4 series - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10 · 08-02-2003, 09:50 PM

I pulled this out of my 70' when I installed my posi. It's a 4 series which means you need 3:73 and higher gears. This would work if you are looking to upgrade from typical 3:07 highway gears to a more performance ratio for the street or strip. It's $25 plus shipping (probably in the $15- $20 range). Thanks......Jim

MOTHERTRUCKERS · 08-03-2003, 07:37 AM

Any stress cracks around the center pin hole or in the corners where the spider gears slip in?

70c10 · 08-03-2003, 01:55 PM

I didn't notice any. It looks real clean and never gave me any probs whatsoever. I'll double check though........Jim

08-02-2003, 09:50 PM	#1
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	12 bolt rear - open carrier 4 series I pulled this out of my 70' when I installed my posi. It's a 4 series which means you need 3:73 and higher gears. This would work if you are looking to upgrade from typical 3:07 highway gears to a more performance ratio for the street or strip. It's $25 plus shipping (probably in the $15- $20 range). Thanks......Jim __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-03-2003, 07:37 AM	#2
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Any stress cracks around the center pin hole or in the corners where the spider gears slip in? __________________ Rest in Peace Ed. Thanks for all the good times.

08-03-2003, 01:55 PM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	I didn't notice any. It looks real clean and never gave me any probs whatsoever. I'll double check though........Jim __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.