Anyone have a loose OEM LH inner fender for a picture? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71CHEVYSHORTBED402** · 01-29-2021, 06:13 PM

Mine is headed out tonight for paint & needs repair where shown. Critical spot due it must clear the power steering lines. A picture or two of the area appreciated, Thank you.

**pjmoreland** · 01-29-2021, 06:42 PM

Mine happens to be sitting in the bed of my truck waiting for my fender to come back from the body shop. Let me know if you need any other angles.

**71CHEVYSHORTBED402** · 01-30-2021, 12:41 AM

Thank you so much. Great timing too, I dropped it off with the guy doing body/paint and we stared at it 20 minutes

Must have taken a heck of a hit at some point, I'll bet when my buddy & I RR the engine so long ago. Again thanks, those pics should be perfect.

**71CHEVYSHORTBED402** · 01-30-2021, 01:33 PM

Well, between you and the body man (Josh) this one is solved already. I'll bet he started shaping it the moment I left his place

Be nice to meet you & truck someday, we're not that far away. Thanks again

**pjmoreland** · 01-30-2021, 01:36 PM

Very cool. I wish the body shop I'm using had available time to just jump on my parts right away like that! I'm probably looking at a couple more months.

I need to get over to Hot August Nights at some point. I wonder if it will happen this year.

Peanut74 · 01-31-2021, 11:17 PM

Here is a picture of my left hand inner fender. The flange had some rust on it. It was originally cut out above the steering box but I was in full blown rust repair mode and filled it to match the right side. Didn't even realize it until I tried to connect the power testing lines. Looked back in my picture files and seen what I did. Bent the lines so they would work.

**71CHEVYSHORTBED402** · 02-01-2021, 01:13 AM

Quote:

Originally Posted by pjmoreland

Very cool. I wish the body shop I'm using had available time to just jump on my parts right away like that! I'm probably looking at a couple more months.

I need to get over to Hot August Nights at some point. I wonder if it will happen this year.

Who knows, I don't know how business stays afloat as it is. The truck won't make it anyway, at least not this year. With luck maybe my cab will be wired up about August.

The guy painting my truck started this 4-5 years ago

Worked out well though, and he's moving right along now and it's more than just the body.

**pjmoreland** · 02-01-2021, 01:33 AM

4-5 years ago... ok, I don't feel so bad anymore

01-29-2021, 06:13 PM	#1
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,160	Anyone have a loose OEM LH inner fender for a picture? Mine is headed out tonight for paint & needs repair where shown. Critical spot due it must clear the power steering lines. A picture or two of the area appreciated, Thank you. Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

01-29-2021, 06:42 PM	#2
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,349	Re: Anyone have a loose OEM LH inner fender for a picture? Mine happens to be sitting in the bed of my truck waiting for my fender to come back from the body shop. Let me know if you need any other angles. Attached Images

01-30-2021, 12:41 AM	#3
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,160	Re: Anyone have a loose OEM LH inner fender for a picture? Thank you so much. Great timing too, I dropped it off with the guy doing body/paint and we stared at it 20 minutes Must have taken a heck of a hit at some point, I'll bet when my buddy & I RR the engine so long ago. Again thanks, those pics should be perfect. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

01-30-2021, 01:33 PM	#4
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,160	Re: Anyone have a loose OEM LH inner fender for a picture? Well, between you and the body man (Josh) this one is solved already. I'll bet he started shaping it the moment I left his place Be nice to meet you & truck someday, we're not that far away. Thanks again Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

01-30-2021, 01:36 PM	#5
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,349	Re: Anyone have a loose OEM LH inner fender for a picture? Very cool. I wish the body shop I'm using had available time to just jump on my parts right away like that! I'm probably looking at a couple more months. I need to get over to Hot August Nights at some point. I wonder if it will happen this year.

01-31-2021, 11:17 PM	#6
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 590	Re: Anyone have a loose OEM LH inner fender for a picture? Here is a picture of my left hand inner fender. The flange had some rust on it. It was originally cut out above the steering box but I was in full blown rust repair mode and filled it to match the right side. Didn't even realize it until I tried to connect the power testing lines. Looked back in my picture files and seen what I did. Bent the lines so they would work. Attached Images __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a million pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk" 2012 Jeep JKU "Crush" 1976 Chevy short bed with a 327 and 3 on the tree (Sold it to buy the Blazer) 1971 Chevy Blazer (Sold it)

02-01-2021, 01:33 AM	#8
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,349	Re: Anyone have a loose OEM LH inner fender for a picture? 4-5 years ago... ok, I don't feel so bad anymore



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.