![]() |
![]() |
#1 |
Registered User
Join Date: Oct 2001
Location: eikin nc
Posts: 47
|
![]()
does limited slip rearend got springs in them
------------------ 1972 swb super 350/350turbo with out air elkin NC Treasure of 47-72BowTie Of The Carolinas www.47-72BowTieClubofTheCarolinas.com
__________________
1970 C10 327 Turbo 350 with 4/6 drop. 1972 Cheyenne Super 350 350 Turbo. Treasurer of The Bowtie Club of the Carolinas [URL]WWW.BowtieClubof the Carolinas.com/[URL] |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2001
Location: rock island,il,usa
Posts: 5,382
|
![]()
Yes, 4 of em.......
__________________
http://community.webshots.com/user/hotrodhorn |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2001
Location: eikin nc
Posts: 47
|
![]()
why will it spin both for about a car distance and one takes over spining do limted slip have clutches to
------------------ 1972 swb super 350/350turbo with out air elkin NC Treasure of 47-72BowTie Of The Carolinas www.47-72BowTieClubofTheCarolinas.com
__________________
1970 C10 327 Turbo 350 with 4/6 drop. 1972 Cheyenne Super 350 350 Turbo. Treasurer of The Bowtie Club of the Carolinas [URL]WWW.BowtieClubof the Carolinas.com/[URL] |
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
![]()
could be worn out, its 30 years old remember..... time to replace those clutch plates and add posi additive fluid !
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2001
Location: rock island,il,usa
Posts: 5,382
|
![]()
If you are rebuilding ,dont forget the springs. I think you can get about 3 different tensions on the springs(lb ratings). If you are on the street,go for the litest set(stock replacement),the others are too stiff,& will cause the unit to "hop" when cornering.........69 longhorn
__________________
http://community.webshots.com/user/hotrodhorn |
![]() |
![]() |
![]() |
Bookmarks |
|
|