67 Door trim help required - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lippyp · 01-07-2004, 01:30 PM

Can someone post what a plain jane 67 C10 would have had on the inside of the doors. Mine have been badly recovered in vinyl at sometime and as I'm putting in new carpet and tidying up the interior when the weather gets better I want to sort the doors out now as it's something I can do indoors of an evening. It feels like it has a horizontally ribbed panel underneath the vinyl.

I know one door has been replaced at sometime as one door top above the panel has vinyl on it and the other is painted and one vent has the 67 handle the other the later type. I'll probably just re-cover both so they match as otherwise I'll have to re-paint the door.

**Classic Heartbeat** · 01-07-2004, 01:42 PM

Plain Jane 67s just had a steele interior door panel, with a painted steel chanel on top. The chanel on top was screwed directly to the door with 4 phillip's head screws. The top of the door panel slipped into this channel, and had 4 chrome plated 1/4" machined "V" head screws that held the door panel to the bottom of the door. In 1967, arm rest were an option, so if yours was a plain jane, it may not of had those. WES www.ClassicHeartbeat.com

Lippyp · 01-07-2004, 01:57 PM

It feels like the original steel panels are underneath the vinyl, but it looks like the channel has disappeared as the panels are screwed on at the top as well. It does have armrests which I may just repaint with some vinyl dye as physically there OK just the colour is a little worn. I'm not fussed about it looking original as painted steel may add to my already bad condensation problem (no headliner) I may just get some very thin foam and some fabric to match the seat and glue it to the panel so it follows the contours of the steel panel.

67chevemall · 01-07-2004, 04:20 PM

The skins are org. but thats about it!

cduster · 01-07-2004, 07:42 PM

Was making my neck hurt

67chevemall · 01-08-2004, 10:28 AM

Thanks
This picture stuff is killing me!

01-07-2004, 01:30 PM	#1
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	67 Door trim help required Can someone post what a plain jane 67 C10 would have had on the inside of the doors. Mine have been badly recovered in vinyl at sometime and as I'm putting in new carpet and tidying up the interior when the weather gets better I want to sort the doors out now as it's something I can do indoors of an evening. It feels like it has a horizontally ribbed panel underneath the vinyl. I know one door has been replaced at sometime as one door top above the panel has vinyl on it and the other is painted and one vent has the 67 handle the other the later type. I'll probably just re-cover both so they match as otherwise I'll have to re-paint the door. __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission

01-07-2004, 01:42 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Plain Jane 67s just had a steele interior door panel, with a painted steel chanel on top. The chanel on top was screwed directly to the door with 4 phillip's head screws. The top of the door panel slipped into this channel, and had 4 chrome plated 1/4" machined "V" head screws that held the door panel to the bottom of the door. In 1967, arm rest were an option, so if yours was a plain jane, it may not of had those. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

01-07-2004, 01:57 PM	#3
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	It feels like the original steel panels are underneath the vinyl, but it looks like the channel has disappeared as the panels are screwed on at the top as well. It does have armrests which I may just repaint with some vinyl dye as physically there OK just the colour is a little worn. I'm not fussed about it looking original as painted steel may add to my already bad condensation problem (no headliner) I may just get some very thin foam and some fabric to match the seat and glue it to the panel so it follows the contours of the steel panel. __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission

01-07-2004, 04:20 PM	#4
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	The skins are org. but thats about it! __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

01-08-2004, 10:28 AM	#6
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Thanks This picture stuff is killing me! __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

01-07-2004, 07:42 PM	#5
cduster Registered User Join Date: Oct 2002 Location: S.W. Michigan Posts: 403	Was making my neck hurt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.