I need lowered long bed Pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

neonlarry · 03-29-2002, 07:51 PM

I would like to see any pics you have of lowered LWB trucks. Also, I would like to know how much they are dropped, and what size tires. Thanks

busterwivell · 03-29-2002, 07:58 PM

If I can ever get these pictures online, you'll see my 1 Ton Longhorn lowered.

72chevyLWB · 03-29-2002, 10:12 PM

Go to my website at www.geocities.com/chevylwb/chevylwb.html
I have info and specs there

------------------
72 Chevy C/10
87 Chevy Silverado 4X4
www.geocities.com/chevylwb/chevylwb.html
Aberdeen South Dakota

69 longhorn · 03-29-2002, 10:16 PM

3/5 drop,1 1/2 body drop,4" chop,on 1/2 ton pcs. 275/60/15 on 15x8 ralleys rear,& 225/75/15 on 15x6 1/2" ralleys front. 69 longhorn....

neonlarry · 03-30-2002, 12:28 AM

Thanks. If anyone else has any pics I would still like to see them. The one other thing I would like to see is a coil spring truck dropped 2.5 front/4 rear. Would that be level? Or would it still be higher in the back. I am thinking about doing either 2.5/3, or 2.5/4

**70cst** · 03-30-2002, 09:42 AM

I just dropped my 70cst LWB 2 1/2 front and 4" rear. I have 275x60x15 on all four corners. Truck sits fairly level but it has only been a couple days since these were installed. It may still settle a little more.

Custom 68 · 03-30-2002, 09:35 PM

boy 70cst that is the exact same setup I have even tire size. I just did mine also. 2 1/2 spindles and 4 inch lowering springs. finished yesterday. Mine sets about an inch or so higher in the rear than the front but sure looks SWEET!
Dave

fleetimus · 03-30-2002, 11:41 PM

hope this helps

------------------
68 Chevy l/b, 4 whl disc in the foothills of No Calif

71Chev · 03-31-2002, 12:00 AM

Probably not what you wanted but here's mine.
Stock front, 4" in back. 31/10.50 all around.

------------------

71 Chevy CST Long Fleet 350/350/3.07 leaf rear.
Email: 67-72truckparts@nanosecond.com

jmil1974 · 10-12-2002, 12:55 AM

NEED MORE PICS! esp the 2.5/4 with 275/60-15s. If you have some shots, please post em or email me!

THanks!
Jason

Low68 · 10-12-2002, 02:34 PM

Here's one that's not mine.

Low68 · 10-12-2002, 02:35 PM

Second

Low68 · 10-12-2002, 02:36 PM

Third

crazy longhorn · 10-12-2002, 05:19 PM

i see a red X under the pics to the 69 longhorn.....ex long box! here is a link to pics..... http://community.webshots.com/user/hotrodhorn

Andy4639 · 10-12-2002, 05:58 PM

Here is mine. You can also follow the links and see the rest of the story.

Here is the engine.

Crank · 10-14-2002, 03:32 PM

Don't know if this one would be lowered if it had littler rims on it, but I love putting this pic up of this truck with 22's. hehehe. But do you'll think this is a longhorn? I can't really tell, and I was just wondering.
Brandon

Crank · 10-14-2002, 03:36 PM

Don't get mad at me for using someone's pictures or something, but here's one. I only save nice trucks with big rims, sorry guys with 15's, but sometimes I make exceptions.
Brandon

Crank · 10-14-2002, 03:38 PM

Here's another.

XXL · 10-15-2002, 04:51 PM

Just found this while surfing...

Kenneth

**72 Super** · 10-19-2002, 01:43 PM

Here is my 72 it has 5inch springs in the rear.The fronts I am not sure of as they were just heated around 1983 or 84.I'm guessing 3/4 inches in the front.

my new 72 · 10-19-2002, 01:46 PM

mine

my new 72 · 10-19-2002, 01:57 PM

mine

MandarinSixSeven · 10-19-2002, 02:46 PM

how about a lowered 3/4 ton with the 8 Luggers....

race-n-jason · 10-19-2002, 03:48 PM

So much more to do............

dion · 10-19-2002, 03:54 PM

Does anybody else have pics of low 3/4 LWB? I'm thinking about bringing mine down some.

03-29-2002, 07:51 PM	#1
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	I need lowered long bed Pics I would like to see any pics you have of lowered LWB trucks. Also, I would like to know how much they are dropped, and what size tires. Thanks __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

03-29-2002, 07:58 PM	#2
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	If I can ever get these pictures online, you'll see my 1 Ton Longhorn lowered. __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

03-29-2002, 10:12 PM	#3
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	Go to my website at www.geocities.com/chevylwb/chevylwb.html I have info and specs there ------------------ 72 Chevy C/10 87 Chevy Silverado 4X4 www.geocities.com/chevylwb/chevylwb.html Aberdeen South Dakota __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

03-29-2002, 10:16 PM	#4
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	3/5 drop,1 1/2 body drop,4" chop,on 1/2 ton pcs. 275/60/15 on 15x8 ralleys rear,& 225/75/15 on 15x6 1/2" ralleys front. 69 longhorn.... __________________ http://community.webshots.com/user/hotrodhorn

03-30-2002, 12:28 AM	#5
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Thanks. If anyone else has any pics I would still like to see them. The one other thing I would like to see is a coil spring truck dropped 2.5 front/4 rear. Would that be level? Or would it still be higher in the back. I am thinking about doing either 2.5/3, or 2.5/4 __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

03-30-2002, 09:42 AM	#6
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	I just dropped my 70cst LWB 2 1/2 front and 4" rear. I have 275x60x15 on all four corners. Truck sits fairly level but it has only been a couple days since these were installed. It may still settle a little more. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

03-30-2002, 09:35 PM	#7
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,928	boy 70cst that is the exact same setup I have even tire size. I just did mine also. 2 1/2 spindles and 4 inch lowering springs. finished yesterday. Mine sets about an inch or so higher in the rear than the front but sure looks SWEET! Dave __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

03-30-2002, 11:41 PM	#8
fleetimus Registered User Join Date: Jul 2000 Location: Auburn,Ca USA Posts: 369	hope this helps ------------------ 68 Chevy l/b, 4 whl disc in the foothills of No Calif __________________ 68 Chevy l/b, 4 whl disc in the foothills of No Calif

03-31-2002, 12:00 AM	#9
71Chev Senior Member Join Date: Dec 2000 Location: Indiana Posts: 3,074	Probably not what you wanted but here's mine. Stock front, 4" in back. 31/10.50 all around. ------------------ 71 Chevy CST Long Fleet 350/350/3.07 leaf rear. Email: 67-72truckparts@nanosecond.com __________________ 71 Chevy CST Long Fleet 350/350/3.07 leaf rear.

10-12-2002, 12:55 AM	#10
jmil1974 Ain't we cute? Join Date: May 2002 Location: Friendswood, TX Posts: 700	NEED MORE PICS! esp the 2.5/4 with 275/60-15s. If you have some shots, please post em or email me! THanks! Jason __________________ 69 C10 2WD LWB Fleet 350/350 power front disc conversion (6 lug disc kit from gmcpauls) and new engine, PS, A/C, fresh fluids, SHE DRIVES! FOR SALE $3900

10-12-2002, 02:34 PM	#11
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	Here's one that's not mine. Attached Images __________________ Build Thread

10-12-2002, 02:35 PM	#12
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	Second Attached Images __________________ Build Thread

10-12-2002, 02:36 PM	#13
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	Third Attached Images __________________ Build Thread

10-12-2002, 05:19 PM	#14
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	i see a red X under the pics to the 69 longhorn.....ex long box! here is a link to pics..... http://community.webshots.com/user/hotrodhorn

10-12-2002, 05:58 PM	#15
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Lowered Long Bed Here is mine. You can also follow the links and see the rest of the story. Here is the engine. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 10-12-2002 at 06:01 PM.



Register or Log In To remove these advertisements.

10-14-2002, 03:32 PM	#16
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,964	Don't know if this one would be lowered if it had littler rims on it, but I love putting this pic up of this truck with 22's. hehehe. But do you'll think this is a longhorn? I can't really tell, and I was just wondering. Brandon Attached Images

10-14-2002, 03:36 PM	#17
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,964	Don't get mad at me for using someone's pictures or something, but here's one. I only save nice trucks with big rims, sorry guys with 15's, but sometimes I make exceptions. Brandon Attached Images

10-14-2002, 03:38 PM	#18
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,964	Here's another. Attached Images

10-15-2002, 04:51 PM	#19
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Just found this while surfing... Kenneth __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

10-19-2002, 01:43 PM	#20
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,678	Here is my 72 it has 5inch springs in the rear.The fronts I am not sure of as they were just heated around 1983 or 84.I'm guessing 3/4 inches in the front. Attached Images __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

10-19-2002, 01:46 PM	#21
my new 72 faster, faster, faster Join Date: Dec 2001 Location: Houston ,Texas ,USA Posts: 1,354	mine __________________ I'm going to Law School, wanna debate? It's good practice.

10-19-2002, 01:57 PM	#22
my new 72 faster, faster, faster Join Date: Dec 2001 Location: Houston ,Texas ,USA Posts: 1,354	mine __________________ I'm going to Law School, wanna debate? It's good practice.

10-19-2002, 02:46 PM	#23
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	how about a lowered 3/4 ton with the 8 Luggers.... Attached Images __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

10-19-2002, 03:48 PM	#24
race-n-jason -Praise the Lowered- Join Date: Oct 2001 Location: Garland, Tx, USA Posts: 280	3" Front 5" Rear So much more to do............ Attached Images __________________ Race-N-Jason ('71 Chevy C-10 LWB 454/TH350) ('07 Dodge Ram 2500, 5.9 Cummins/6-speed Manual)

10-19-2002, 03:54 PM	#25
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Does anybody else have pics of low 3/4 LWB? I'm thinking about bringing mine down some. __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

Register or Log In To remove these advertisements.