|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-03-2013, 07:45 PM
|
#1 |
|
Senior Member
 
Join Date: Jan 2012
Location: Phoenix, Arizona
Posts: 498
|
Tired of lookin everywhere
I need bushings and U bolts for trailing arm on my 69 C/20, also need the bushings for the rear sway bar. Really tired of lookin' to find out the place i am looking at only has C/10 stuff (nothing against the C/10 guys) but i would just like to order the stuff from one place.
|
|
|
|
12-03-2013, 09:31 PM
|
#2 |
|
Senior Member
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,349
|
Re: Tired of lookin everywhere
__________________
A husband can be right...or...A husband can be happy.  67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.  1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc   JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
|
|
|
|
12-03-2013, 10:24 PM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,841
|
Re: Tired of lookin everywhere
I would think the trailing arm bushings and, perhaps, U-bolts are the same as 1/2 ton trucks. The trailing arms are the same except for reinforcing plates on the top and bottom. LMC's catalog does not specify 1/2 or 3/4 ton on the bushings or U-bolts.
Not sure what you mean by rear sway bar. They were not available from GM. Do you mean tracking arm? If so, I ordered part #30-2015 from LMC for my 69 3/4 ton with Eaton axle. |
|
|
|
|
12-03-2013, 11:40 PM
|
#4 |
|
Registered User
Join Date: Jan 2011
Location: Lynn Haven Florida
Posts: 1,019
|
Re: Tired of lookin everywhere
Got both of mine from lmc and am using 3/4 ton trailing arms on my 1/2 ton
|
|
|
|
|
12-04-2013, 09:09 AM
|
#5 |
|
Registered User
Join Date: Mar 2009
Location: WARRENSBURG,MISSOURI,64093
Posts: 1,518
|
Re: Tired of lookin everywhere
I had to buy some U bolts for my C10 here a few weeks ago. Most heavy truck shops have the machines for bending custom U bolts, cost me about $20.00 after it was done.
HTH, Ben |
|
|
|
|
12-04-2013, 09:15 AM
|
#6 |
|
Registered User
Join Date: Feb 2013
Location: Northwest NJ
Posts: 684
|
Re: Tired of lookin everywhere
Classic Parts Of America sells the U-bolts.....they list different ones for C-10 & C-20. I just ordered the ones for my C-10 last week, and they are the perfect size & fit great. Check their website.
|
|
|
|
|
12-04-2013, 12:02 PM
|
#7 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Tired of lookin everywhere
i buy stuff local at NAPA// they can get all these common parts no need to pay shipping
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
