What did you get done 9/22/19 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 09-22-2019, 02:10 PM

I have been making such progress on the 76 and I decided to go out and work on the 79,, a truck that sat here the better part of three years and does nothing but collect dirt and is used as a storage shed.. the bed was just a tad rotted so I found a better replacement bed and removed the old bed and installed the new one at least laid it on the frame How about you all??

**raidmagic** · 09-22-2019, 03:45 PM

I got both my doors on and working right, painted a blue that almost matches got the new windshield installed. My thumbs hurt.

100%Chevy · 09-22-2019, 07:14 PM

I have a lot of trucks and cars here.
Usually once a month,I try to start and run them at least 30 minutes.
I made it thru 3 just fine,then spent over an hour on one!Not getting gas!My 82,C-30 car hauler.New dual tanks and switching valve.
Took the rest of the hour to find it was out of gas!
It's going now!
Way it goes sometimes.
Mike.

**Wgesnerjr** · 09-22-2019, 08:13 PM

Drove mine to Summit Racing F-body carshow in McDonough GA. Over an hour running 70-80 mph. Temp 205 steady. Oil press 45-50 fluctuated with throttle. Volts 13.5 steady. A/C blew cold the whole time. Even put it on Bi-level for a while as my face got too cold. Cruise Control worked flawlessly. Really enjoyed the trip.

This LS motor is soooooo boosting my confidence level in this truck.

09-22-2019, 02:10 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,275	What did you get done 9/22/19 edition I have been making such progress on the 76 and I decided to go out and work on the 79,, a truck that sat here the better part of three years and does nothing but collect dirt and is used as a storage shed.. the bed was just a tad rotted so I found a better replacement bed and removed the old bed and installed the new one at least laid it on the frame How about you all?? Attached Images __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

09-22-2019, 03:45 PM	#2
raidmagic Senior Member Join Date: Jan 2015 Location: Tampa, Fl. Posts: 421	Re: What did you get done 9/22/19 edition I got both my doors on and working right, painted a blue that almost matches got the new windshield installed. My thumbs hurt.

09-22-2019, 07:14 PM	#3
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: What did you get done 9/22/19 edition I have a lot of trucks and cars here. Usually once a month,I try to start and run them at least 30 minutes. I made it thru 3 just fine,then spent over an hour on one!Not getting gas!My 82,C-30 car hauler.New dual tanks and switching valve. Took the rest of the hour to find it was out of gas! It's going now! Way it goes sometimes. Mike.

09-22-2019, 08:13 PM	#4
Wgesnerjr Senior Member Join Date: Jun 2015 Location: Atlanta, GA. Posts: 737	Re: What did you get done 9/22/19 edition Drove mine to Summit Racing F-body carshow in McDonough GA. Over an hour running 70-80 mph. Temp 205 steady. Oil press 45-50 fluctuated with throttle. Volts 13.5 steady. A/C blew cold the whole time. Even put it on Bi-level for a while as my face got too cold. Cruise Control worked flawlessly. Really enjoyed the trip. This LS motor is soooooo boosting my confidence level in this truck. __________________ Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.