58/59 fenders wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dubie · 10-05-2004, 10:53 AM

Anyone have a nice set of used 58/59 fenders they would like to sell? If not , I will have to dig deep into the ol pockets for a set of fiberglass repro that are over $1000/pair. OUCH!!!

northerngmc · 10-05-2004, 06:44 PM

Why not reproduction steel?

Scott's in Penhold sold me my set for $1100.

What about the set your pit boss was looking at under "58 GMC truck parts wanted"

http://67-72chevytrucks.com/vboard/s....php3?t=118544

I have a set, asking $200. Go to the link in my signature and click on fenders.

dubie · 10-05-2004, 07:39 PM

Do you have a pic of them now? Just curious how much work is required to make them straight and true again. But judging from the pics, I would say that those fenders will be sold!!

They are in WAY better shape than the ones on the truck. That's $200 each or for the pair?

rico_bob · 10-05-2004, 09:44 PM

rico here. go to *: www.goldenleafautomotive.com (they have dealers listed for canada)

*Same as wholesale outfit that we use (Dynacorn Internatuional, Inc) only they speak Canadianeeze!

northerngmc · 10-06-2004, 01:52 PM

I guess maybe it should have been $200 each, but I just want $200 for the pair.

They have been sandblasted now and I think I have a couple of pictures at home, but not digital. I might try scanning them and posting.

dubie · 10-07-2004, 02:41 PM

sure, any pics you might be able to provide us would be very much appreciated bud

rico_bob · 10-07-2004, 11:24 PM

Dubie....look at the ones SEON is selling here for $400.00 Wish I had the extra cash to buy that great looking front clip for our shop. rico_bob

www.ricos-rods-and-relics.com

dubie · 10-08-2004, 10:02 AM

Yeah I have been in contact with Seon about it. If it was at all feasable, it would be on it's way to me right now. But the exchange rate along with shipping would come to a total of over $1000, and all I need are the fenders. For $1000 I could buy repro ones. So price wise for me it just can't work

*Slams_58* · 10-10-2004, 10:32 AM

northergmc...I'm still very interested in your fenders. I was just wondering if you had any pics of them after you sand blasted them!

northerngmc · 10-10-2004, 04:40 PM

I was hoping to scan a couple of photos this weekend, but I seem to be very busy painting a bedroom.

I will try and get them scanned between coats, probably tomorrow though.

northerngmc · 10-11-2004, 05:35 PM

Here are a couple of pictures after sand blasting.

dubie · 10-12-2004, 10:01 AM

SOLD!! please e-mail me at chinook@mts.net with payment details. We will work out some shipping details

northerngmc · 10-12-2004, 10:33 AM

Dubie, did you notice on the right fender that there are some small dents between the fender opening and the front?

dubie · 10-12-2004, 11:06 AM

I can't seem to see them on my screen here. My monitor sucks at the shop. Are they very deep? or can they be easily worked out and filled?

northerngmc · 10-12-2004, 05:40 PM

I'm not a bodyman, but I don't think they are a major concern.

Take another look at then before sandblasting (link in my signature).

*Slams_58* · 10-12-2004, 07:31 PM

They look good to us. The dents look to be pretty minor. Whats the best way to ship out of Fort Smith? Maybe Bus?? what trucking companies deliver into there?

10-05-2004, 10:53 AM	#1
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	58/59 fenders wanted Anyone have a nice set of used 58/59 fenders they would like to sell? If not , I will have to dig deep into the ol pockets for a set of fiberglass repro that are over $1000/pair. OUCH!!! __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

10-05-2004, 06:44 PM	#2
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Why not reproduction steel? Scott's in Penhold sold me my set for $1100. What about the set your pit boss was looking at under "58 GMC truck parts wanted" http://67-72chevytrucks.com/vboard/s....php3?t=118544 I have a set, asking $200. Go to the link in my signature and click on fenders. __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

10-05-2004, 07:39 PM	#3
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	Do you have a pic of them now? Just curious how much work is required to make them straight and true again. But judging from the pics, I would say that those fenders will be sold!! They are in WAY better shape than the ones on the truck. That's $200 each or for the pair? __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

10-05-2004, 09:44 PM	#4
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	rico here. go to : www.goldenleafautomotive.com (they have dealers listed for canada) Same as wholesale outfit that we use (Dynacorn Internatuional, Inc) only they speak Canadianeeze! __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

10-06-2004, 01:52 PM	#5
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Price I guess maybe it should have been $200 each, but I just want $200 for the pair. They have been sandblasted now and I think I have a couple of pictures at home, but not digital. I might try scanning them and posting. __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

10-07-2004, 02:41 PM	#6
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	sure, any pics you might be able to provide us would be very much appreciated bud __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

10-07-2004, 11:24 PM	#7
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	Dubie....look at the ones SEON is selling here for $400.00 Wish I had the extra cash to buy that great looking front clip for our shop. rico_bob www.ricos-rods-and-relics.com __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

10-08-2004, 10:02 AM	#8
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	Yeah I have been in contact with Seon about it. If it was at all feasable, it would be on it's way to me right now. But the exchange rate along with shipping would come to a total of over $1000, and all I need are the fenders. For $1000 I could buy repro ones. So price wise for me it just can't work __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

10-10-2004, 10:32 AM	#9
Slams_58 Account Suspended Join Date: May 2002 Location: I let ya know as soon as I know Posts: 3,593	northergmc...I'm still very interested in your fenders. I was just wondering if you had any pics of them after you sand blasted them!

10-10-2004, 04:40 PM	#10
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	I was hoping to scan a couple of photos this weekend, but I seem to be very busy painting a bedroom. I will try and get them scanned between coats, probably tomorrow though. __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

10-11-2004, 05:35 PM	#11
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	more pictures Here are a couple of pictures after sand blasting. Attached Images __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

10-12-2004, 10:01 AM	#12
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	SOLD!! please e-mail me at chinook@mts.net with payment details. We will work out some shipping details __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

10-12-2004, 10:33 AM	#13
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Dubie, did you notice on the right fender that there are some small dents between the fender opening and the front? __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

10-12-2004, 11:06 AM	#14
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	I can't seem to see them on my screen here. My monitor sucks at the shop. Are they very deep? or can they be easily worked out and filled? __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

10-12-2004, 05:40 PM	#15
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	I'm not a bodyman, but I don't think they are a major concern. Take another look at then before sandblasting (link in my signature). __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!



Register or Log In To remove these advertisements.

10-12-2004, 07:31 PM	#16
Slams_58 Account Suspended Join Date: May 2002 Location: I let ya know as soon as I know Posts: 3,593	They look good to us. The dents look to be pretty minor. Whats the best way to ship out of Fort Smith? Maybe Bus?? what trucking companies deliver into there?

Register or Log In To remove these advertisements.