Have Roll Pan .. want to go bumper --- Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy Muscle · 06-05-2006, 05:28 PM

Well, I've changed my mind. I have a roll pan on my 69 Blazer and I'm thinking I want to go with a sport bumper instead.

I never welded in my roll pan, so I can just unscrew it.

But... I don't have brackets or a bumper and I want to find some. My question is are the stock brackets and bumper the same for all fleetsides in the series or were there changes in some of the years (I have '69).

LUV2XCLR8 · 06-05-2006, 05:39 PM

Only the rear of a 72 Blazer differs from 69-72, it uses the frame horns
w/ outer brackets to hold on the bumper, for a 69-71 you just need a
complete set of Fleetside p/u brackets and a Fleetside sport bumper

Bishops Trucks · 06-05-2006, 05:42 PM

The brackets are the same for '67 to '72 the bumper you want goes '67 to '70, because the '71-'72 bumpers have holes for the turn signal lights.
EDIT:
I thought you were talking about the front. It's been a long week already and its only Monday.

LUV2XCLR8 · 06-05-2006, 05:43 PM

Bishops brought up a good point, is this for the front or the rear?

Bishop answered for the front, and I answered for the rear

Chevy Muscle · 06-05-2006, 05:52 PM

It's for the rear.

Thanks for the answers guys!

corn · 06-05-2006, 06:28 PM

Will the rollpan fit a fleet truck? I might be interested in it if it would fit...

Chevy Muscle · 06-05-2006, 07:43 PM

Yes it's a fleet roll pan with license place recess and license lights

lngbed71 · 06-06-2006, 05:29 AM

Muscle: PM sent

Chevy Muscle · 06-06-2006, 11:15 AM

Thanks for all the inquiries about buying my Roll pan.

I do want to sell it, but only after I get a set of brackets and a bumper to replace it with.

So, I won't be selling it for a little while yet.

06-05-2006, 05:28 PM	#1
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 293	Have Roll Pan .. want to go bumper --- Question Well, I've changed my mind. I have a roll pan on my 69 Blazer and I'm thinking I want to go with a sport bumper instead. I never welded in my roll pan, so I can just unscrew it. But... I don't have brackets or a bumper and I want to find some. My question is are the stock brackets and bumper the same for all fleetsides in the series or were there changes in some of the years (I have '69).

06-05-2006, 05:39 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Have Roll Pan .. want to go bumper --- Question Only the rear of a 72 Blazer differs from 69-72, it uses the frame horns w/ outer brackets to hold on the bumper, for a 69-71 you just need a complete set of Fleetside p/u brackets and a Fleetside sport bumper __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 06-05-2006 at 05:39 PM.

06-05-2006, 05:42 PM	#3
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: Have Roll Pan .. want to go bumper --- Question The brackets are the same for '67 to '72 the bumper you want goes '67 to '70, because the '71-'72 bumpers have holes for the turn signal lights. EDIT: I thought you were talking about the front. It's been a long week already and its only Monday. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER" Last edited by Bishops Trucks; 06-05-2006 at 05:44 PM.

06-05-2006, 05:43 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: Have Roll Pan .. want to go bumper --- Question Bishops brought up a good point, is this for the front or the rear? Bishop answered for the front, and I answered for the rear __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-05-2006, 05:52 PM	#5
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 293	Re: Have Roll Pan .. want to go bumper --- Question It's for the rear. Thanks for the answers guys!

06-05-2006, 06:28 PM	#6
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Have Roll Pan .. want to go bumper --- Question Will the rollpan fit a fleet truck? I might be interested in it if it would fit...

06-05-2006, 07:43 PM	#7
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 293	Re: Have Roll Pan .. want to go bumper --- Question Yes it's a fleet roll pan with license place recess and license lights

06-06-2006, 05:29 AM	#8
lngbed71 Nothing fits but the oil Join Date: Mar 2003 Location: Gaston, Indiana Posts: 424	Re: Have Roll Pan .. want to go bumper --- Question Muscle: PM sent __________________ Land of the free Because of the brave

06-06-2006, 11:15 AM	#9
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 293	Re: Have Roll Pan .. want to go bumper --- Question Thanks for all the inquiries about buying my Roll pan. I do want to sell it, but only after I get a set of brackets and a bumper to replace it with. So, I won't be selling it for a little while yet.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.