air ride

[cstm68]

it there a complete air ride kit out there for thease trucks ??

[bskylerj]

Check on air ride technologies web site. That is where I got mine.

[GREASEMONKEY72]

theyre a good company from what i hear

[shifty]

CPP (classic performance products) sells a kit to lower, and they have a kit from ART (air ride tech) that they can possibly include (?) in the package, or at least they can tell you which one to buy.

[randomhero472]

for a lot cheaper check out www.***************** the front mounting kit is around $50, and the rear bags are direct bolt in replacement for the springs.. you can do the whole truck for the cost of Air Ride Tech Front setup

[GREASEMONKEY72]

Originally Posted by randomhero472

for a lot cheaper check out www.***************** the front mounting kit is around $50, and the rear bags are direct bolt in replacement for the springs.. you can do the whole truck for the cost of Air Ride Tech Front setup

i forgot about them, theyre cheaper than everybody and just as good, from what ive seen and heard both in person and on the net

[cstm68]

Originally Posted by randomhero472

for a lot cheaper check out www.***************** the front mounting kit is around $50, and the rear bags are direct bolt in replacement for the springs.. you can do the whole truck for the cost of Air Ride Tech Front setup

thanx guys
is there a part number for the rear bags ?
or a way to look up by truck type ??

[shifty]

You'll want the Slam Specialties RE 200's listed on this page for $75:

http://www.*****************/AirbagsSlamSpecialties.php

[randomhero472]

yes.. the 7" re200's both front rear... imo i would run 3/8's bags, thats plenty fast, anything bigger is impossible to control the lift/dump

[cstm68]

Originally Posted by shifty

You'll want the Slam Specialties RE 200's listed on this page for $75:

http://www.*****************/AirbagsSlamSpecialties.php

if i had thease all the way up how high would the rear of the truck be? EX 2" drop ? 3"dorp 4 or 5 ??

and will thease bolt up the my frame in place of my rear springs ?

can u use them as manual bags without a compressor and tank and fill them with just a regular garage compressor if i wanted to raise the truck ??

[Spray-Bomb]

RE-7
Diameter: 7"
Min height: 3"
Max height: 11"
Max PSI: 180


You'll need to drill mounting holes for the top, in the frame for the bolts & the air-line

[shifty]

Height info ^^^

According to the other guys, these are a direct bolt-up to the frame in the rear, but you will need to drill a couple of holes for the lines going to the bag. More info is available in the last thread you started (stop starting so many threads on the same topic!! )

Yes to your last question also - and this was also answered in your other thread on the same topic.

[cstm68]

sorry about that i forgot about that post