Looking at a 67 truck..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jr1000yarder · 09-17-2016, 10:06 AM

Heres the SPID

no motor listed but has a v-8 in it

What gives???

block casting says its a 327

pretty rusty but cheap......

wpavlis · 09-17-2016, 10:26 AM

The CE in the serial # indicates a v8. The 327 would show up on the spid I believe. Looks like some good options though.

jr1000yarder · 09-17-2016, 10:31 AM

ok, thanks. it's a rust bucket but a good candidate to save it..........

bed is shot, rockers shot, door look ok.....doesn't appear to be molested too badly. Not as good as my boys truck, that's for sure.

IDK................we'll see

has a rear cargo light also, idk if that what added........

**68bowtie** · 09-17-2016, 10:33 AM

still have the buddies?

jr1000yarder · 09-17-2016, 10:35 AM

Quote:

Originally Posted by 68bowtie

still have the buddies?

no, bench...............should it have buddies???

10 hours away ........

**too much stuff** · 09-17-2016, 10:41 AM

Should have bucket seats and no cargo light if still original. Should also have a small back window. A lot can change in that many years.

jr1000yarder · 09-17-2016, 10:51 AM

Quote:

Originally Posted by too much stuff

Should have bucket seats and no cargo light if still original. Should also have a small back window. A lot can change in that many years.

well......................buckets are gone, small window, must have had a light added....nothing a welder can't fix!!!!!

jr1000yarder · 09-17-2016, 10:53 AM

What gives on the engine codes........I know a BB wasn't avail in 67. What were the other 8cyl options possibly...

has rams horns front what I can tell....pictures suck

wpavlis · 09-17-2016, 11:02 AM

The link won't copy from my phone but Google 1967 c10 options. GM heritage center has a pdf of available options

**68bowtie** · 09-17-2016, 11:04 AM

if it's not salvageable it would be a good parts truck at least. that's a long drive though. ask if he's got "the old split bench seat" you never know.

wpavlis · 09-17-2016, 11:04 AM

I believe a 283 would have been standard in 67

midniteblues · 09-17-2016, 11:06 AM

Quote:

Originally Posted by jr1000yarder

What gives on the engine codes........I know a BB wasn't avail in 67. What were the other 8cyl options possibly...

has rams horns front what I can tell....pictures suck

283 or 327 for the v-8's in 67.

By the spid it looks like a good builder.

jr1000yarder · 09-17-2016, 11:11 AM

Quote:

Originally Posted by midniteblues

283 or 327 for the v-8's in 67.

By the spid it looks like a good builder.

casting # is 3970010

from what I can tell that's a 327 block.....trying to get the deck code.....

I agree, would be cool with a 4spd without a creeper for a fast, low truck!

I think I can get plenty of horses out of that 327.......

jr1000yarder · 09-17-2016, 11:12 AM

Quote:

Originally Posted by 68bowtie

if it's not salvageable it would be a good parts truck at least. that's a long drive though. ask if he's got "the old split bench seat" you never know.

negative.....just got off the phone with him. 2500 good????

floors are really nice, needs rockers, fenders, and a bed.....

jr1000yarder · 09-17-2016, 11:16 AM

Some pics

jr1000yarder · 09-17-2016, 11:19 AM

another......

wpavlis · 09-17-2016, 11:22 AM

Could be a 350. Same block for both.

jr1000yarder · 09-17-2016, 11:33 AM

Quote:

Originally Posted by wpavlis

Could be a 350. Same block for both.

yeah, that would suck..............

jr1000yarder · 09-17-2016, 12:06 PM

block

jr1000yarder · 09-17-2016, 12:07 PM

Anyone else?????

Watcha think????

**Jeff's bowtie's** · 09-17-2016, 12:37 PM

Seems like a fair price pretty nice optioned 67

**68bowtie** · 09-17-2016, 12:39 PM

price is way off being that rusty at least out west, not sure about your area. sure would make an awesome truck restored to factory specs.

ratty69 · 09-17-2016, 12:43 PM

Looks like at least the top end is newer. 1. The heads have accessory holes. 2. Intake doesn't have an oil fill tube, and does have the mount for the alternator bracket used with long water pumps. 3. Valve covers and air cleaner are definitely newer.

**leddzepp** · 09-17-2016, 01:03 PM

I wouldn't pay more than $500 for a rusty parts truck

jr1000yarder · 09-17-2016, 01:32 PM

Quote:

Originally Posted by leddzepp

I wouldn't pay more than $500 for a rusty parts truck

We don't have un-rusty trucks out here lol

If I lived in CA I would agree!

09-17-2016, 10:06 AM	#1
jr1000yarder Registered User Join Date: May 2016 Location: Pa Posts: 1,278	Looking at a 67 truck..... Heres the SPID no motor listed but has a v-8 in it What gives??? block casting says its a 327 pretty rusty but cheap...... Attached Images __________________ IT IS WHAT IT IS

09-17-2016, 10:26 AM	#2
wpavlis Registered User Join Date: Oct 2015 Location: San Tan Valley, Arizona Posts: 313	Re: Looking at a 67 truck..... The CE in the serial # indicates a v8. The 327 would show up on the spid I believe. Looks like some good options though.

09-17-2016, 10:31 AM	#3
jr1000yarder Registered User Join Date: May 2016 Location: Pa Posts: 1,278	Re: Looking at a 67 truck..... ok, thanks. it's a rust bucket but a good candidate to save it.......... bed is shot, rockers shot, door look ok.....doesn't appear to be molested too badly. Not as good as my boys truck, that's for sure. IDK................we'll see has a rear cargo light also, idk if that what added........ __________________ IT IS WHAT IT IS

09-17-2016, 10:33 AM	#4
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,505	Re: Looking at a 67 truck..... still have the buddies? __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Survivor "Lil’ Mint" (67 c10 40k mile light green original paint) Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

09-17-2016, 10:41 AM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Looking at a 67 truck..... Should have bucket seats and no cargo light if still original. Should also have a small back window. A lot can change in that many years. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-17-2016, 10:53 AM	#8
jr1000yarder Registered User Join Date: May 2016 Location: Pa Posts: 1,278	Re: Looking at a 67 truck..... What gives on the engine codes........I know a BB wasn't avail in 67. What were the other 8cyl options possibly... has rams horns front what I can tell....pictures suck __________________ IT IS WHAT IT IS

09-17-2016, 11:02 AM	#9
wpavlis Registered User Join Date: Oct 2015 Location: San Tan Valley, Arizona Posts: 313	Re: Looking at a 67 truck..... The link won't copy from my phone but Google 1967 c10 options. GM heritage center has a pdf of available options

09-17-2016, 11:04 AM	#10
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,505	Re: Looking at a 67 truck..... if it's not salvageable it would be a good parts truck at least. that's a long drive though. ask if he's got "the old split bench seat" you never know. __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Survivor "Lil’ Mint" (67 c10 40k mile light green original paint) Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

09-17-2016, 11:04 AM	#11
wpavlis Registered User Join Date: Oct 2015 Location: San Tan Valley, Arizona Posts: 313	Re: Looking at a 67 truck..... I believe a 283 would have been standard in 67

09-17-2016, 11:16 AM	#15
jr1000yarder Registered User Join Date: May 2016 Location: Pa Posts: 1,278	Re: Looking at a 67 truck..... Some pics Attached Images __________________ IT IS WHAT IT IS

09-17-2016, 11:19 AM	#16
jr1000yarder Registered User Join Date: May 2016 Location: Pa Posts: 1,278	Re: Looking at a 67 truck..... another...... Attached Images __________________ IT IS WHAT IT IS

09-17-2016, 11:22 AM	#17
wpavlis Registered User Join Date: Oct 2015 Location: San Tan Valley, Arizona Posts: 313	Re: Looking at a 67 truck..... Could be a 350. Same block for both.

09-17-2016, 12:06 PM	#19
jr1000yarder Registered User Join Date: May 2016 Location: Pa Posts: 1,278	Re: Looking at a 67 truck..... block Attached Images __________________ IT IS WHAT IT IS

09-17-2016, 12:07 PM	#20
jr1000yarder Registered User Join Date: May 2016 Location: Pa Posts: 1,278	Re: Looking at a 67 truck..... Anyone else????? Watcha think???? __________________ IT IS WHAT IT IS

09-17-2016, 12:37 PM	#21
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,938	Re: Looking at a 67 truck..... Seems like a fair price pretty nice optioned 67



Register or Log In To remove these advertisements.

09-17-2016, 12:39 PM	#22
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,505	Re: Looking at a 67 truck..... price is way off being that rusty at least out west, not sure about your area. sure would make an awesome truck restored to factory specs. __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Survivor "Lil’ Mint" (67 c10 40k mile light green original paint) Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

09-17-2016, 12:43 PM	#23
ratty69 Registered User Join Date: Jun 2016 Location: Vancouver B.C. Posts: 206	Re: Looking at a 67 truck..... Looks like at least the top end is newer. 1. The heads have accessory holes. 2. Intake doesn't have an oil fill tube, and does have the mount for the alternator bracket used with long water pumps. 3. Valve covers and air cleaner are definitely newer.

09-17-2016, 01:03 PM	#24
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,991	Re: Looking at a 67 truck..... I wouldn't pay more than $500 for a rusty parts truck __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

Register or Log In To remove these advertisements.