Swb Bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**uncle** · 07-22-2008, 04:14 PM

This is a decnt bed that will need work,but not beyond repair. It has good outer sides,but needs some work on the d/s inner and a few other places. One tub is useable as is header,but not perfect for the price. Couple of holes in the bed supports also.Please ask if you want more pics. No shipping. $375 FIRM.Please respond to post.

**uncle** · 07-22-2008, 04:15 PM

More pics.

Number98 · 07-23-2008, 12:10 PM

For the price that thing looks pretty good....

TTT for you...

meathead95 · 07-23-2008, 04:41 PM

interested. is it rusted out where the wheel tubs attach to the sides? have you had them off? any rust holes in the sides at all?

**uncle** · 07-23-2008, 04:50 PM

Have not had the tubs out. There are a few bubbles on the rear p/s right behind the wheel.

**uncle** · 07-24-2008, 10:01 PM

Bump!

meathead95 · 07-25-2008, 08:42 AM

can you post pics of the worst rust and dents in the sides? i dont care about the floor as i plan to use a steel floor. do you mind taking the tubs out to check?

**uncle** · 07-26-2008, 10:05 PM

More pics and no rust through around the tubs.

**uncle** · 07-26-2008, 10:08 PM

More.

**uncle** · 07-26-2008, 10:09 PM

Last set.

**uncle** · 08-31-2008, 08:47 PM

Last time at $350.

**uncle** · 09-02-2008, 04:32 PM

Bump for $350.

Chevy_Man · 09-03-2008, 04:55 PM

I sure wish you was closer....

Eric

67Black · 09-17-2008, 02:50 PM

Hey Uncle lol what about $300 for bed and i'll come get it!!!

**uncle** · 09-17-2008, 03:27 PM

I have 2 guys coming Saturday to look. If I still have it after then I'll let you know. It's still $350 either way.

72BlckButy · 09-17-2008, 09:16 PM

Looks like a great deal... bump!

slicks garage · 09-21-2008, 01:06 AM

What is bump? And ttt????

**uncle** · 09-21-2008, 07:59 AM

Bed is sold.

07-22-2008, 04:14 PM	#1
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Swb Bed This is a decnt bed that will need work,but not beyond repair. It has good outer sides,but needs some work on the d/s inner and a few other places. One tub is useable as is header,but not perfect for the price. Couple of holes in the bed supports also.Please ask if you want more pics. No shipping. $375 FIRM.Please respond to post. Attached Images

07-22-2008, 04:15 PM	#2
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Swb Bed More pics. Attached Images

07-23-2008, 12:10 PM	#3
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: Swb Bed For the price that thing looks pretty good.... TTT for you...

07-23-2008, 04:41 PM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: Swb Bed interested. is it rusted out where the wheel tubs attach to the sides? have you had them off? any rust holes in the sides at all? __________________ 72 2wd blazer 72 swb 4x4

07-23-2008, 04:50 PM	#5
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Swb Bed Have not had the tubs out. There are a few bubbles on the rear p/s right behind the wheel. Last edited by uncle; 07-23-2008 at 04:51 PM.

07-24-2008, 10:01 PM	#6
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Swb Bed Bump!

07-25-2008, 08:42 AM	#7
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: Swb Bed can you post pics of the worst rust and dents in the sides? i dont care about the floor as i plan to use a steel floor. do you mind taking the tubs out to check? __________________ 72 2wd blazer 72 swb 4x4

07-26-2008, 10:05 PM	#8
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Swb Bed More pics and no rust through around the tubs. Attached Images

07-26-2008, 10:08 PM	#9
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Swb Bed More. Attached Images

07-26-2008, 10:09 PM	#10
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Swb Bed Last set. Attached Images

08-31-2008, 08:47 PM	#11
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Swb Bed Last time at $350.

09-02-2008, 04:32 PM	#12
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Swb Bed Bump for $350.

09-03-2008, 04:55 PM	#13
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	Re: Swb Bed I sure wish you was closer.... Eric __________________ 56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons

09-17-2008, 02:50 PM	#14
67Black Registered User Join Date: Feb 2007 Location: Warner Robins,Georgia Pelham, GA Posts: 46	Re: Swb Bed Hey Uncle lol what about $300 for bed and i'll come get it!!!

09-17-2008, 03:27 PM	#15
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Swb Bed I have 2 guys coming Saturday to look. If I still have it after then I'll let you know. It's still $350 either way.



Register or Log In To remove these advertisements.

09-17-2008, 09:16 PM	#16
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Swb Bed Looks like a great deal... bump! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-21-2008, 01:06 AM	#17
slicks garage Registered User Join Date: Aug 2008 Location: Phoenix, AZ Posts: 56	Re: Swb Bed What is bump? And ttt????

09-21-2008, 07:59 AM	#18
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Swb Bed Bed is sold.

Register or Log In To remove these advertisements.