Lets see your door panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigbadchev72 · 11-28-2008, 01:40 AM

I am needing ideas for door panels in my 67 please post up what you have done with your METAL door panels!

Richard8971 · 11-28-2008, 02:18 AM

Here's mine.

Don

bigbadchev72 · 11-28-2008, 02:37 AM

What is that material? did you do it yourself? how did you do them?

Richard8971 · 11-28-2008, 03:04 AM

Quote:

Originally Posted by bigbadchev72

What is that material? did you do it yourself? how did you do them?

I had my upholstery guy in Oregon do the door panels, but they are easy enough to do yourself.

The material is tweed. I love the way tweed looks and feels. I cannot guarantee all materials will mold the way tweed does so take caution if you decide to use a different material.

You simply get a piece of material large enough (leave an inch or so on each side for wrapping the material around the edge) to cover the panel and spray contact cement on the outside of the door and the inside of the material. Give it a chance to dry (as per cement instructions) and flip the panel and place (glue down) on top of the material (glue up) and press down hard to make the glue bond. (Try to keep the panel parallel with the grain of the tweed.) Spray a little contact cement on the back edges of the panel and the outside edge of the material. Give that a chance to dry and fold the edges of the material over the edge and adhere it to the back. Trim and cut material as needed for a clean wrap.

Flip the panel over and start moulding the material into the grooves and contours. Ta dah! You're done.

Hope my instructions make sence.

D

Andy4639 · 11-28-2008, 07:10 AM

These are what I did. I went and got the panel material and covered them myself. Nothing spectacular but it works for me.

GMC Jim · 11-28-2008, 09:50 AM

These are pleated door panels sewed to a 1/4" foam backing... And the door pull/armrest is from a 1970 Monte Carlo...........Jim

Sport/Truck · 11-28-2008, 10:29 AM

Here are my original panels.
s/t

oldblue1968chevy · 11-28-2008, 11:58 AM

richard, it looks like the pannel wouldnt go back into the hole cut out in the door wtih carpet over it..im strongly considering doing mine somewhat like yours.....

Mudder · 11-28-2008, 01:00 PM

You can buy these from Classic Parts or LMC. The Venders here can probably get them also.

bigsnookmaster · 12-04-2008, 09:08 PM

Here's mine, they're kind of a hybrid.70 panels with 72 armrests with wooden insert,covered in black Ultra-leather

Richard8971 · 12-04-2008, 09:12 PM

Quote:

Originally Posted by oldblue1968chevy

richard, it looks like the pannel wouldnt go back into the hole cut out in the door wtih carpet over it..im strongly considering doing mine somewhat like yours.....

Well, tweed is not very thick. It lays inside the grove ok. And just in case you were wondering, my truck must have been pretty bone stock when it was made. It did not come with any inside armrests!

Don

11-28-2008, 01:40 AM	#1
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Lets see your door panels I am needing ideas for door panels in my 67 please post up what you have done with your METAL door panels! __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

11-28-2008, 02:18 AM	#2
Richard8971 Still livin the "dream" in '54 Join Date: Nov 2006 Location: Tucson, AZ Posts: 2,656	Re: Lets see your door panels Here's mine. Don Attached Images __________________ Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo

11-28-2008, 02:37 AM	#3
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: Lets see your door panels What is that material? did you do it yourself? how did you do them? __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

11-28-2008, 07:10 AM	#5
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Lets see your door panels These are what I did. I went and got the panel material and covered them myself. Nothing spectacular but it works for me. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-28-2008, 09:50 AM	#6
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	Re: Lets see your door panels These are pleated door panels sewed to a 1/4" foam backing... And the door pull/armrest is from a 1970 Monte Carlo...........Jim Attached Images __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal). Last edited by GMC Jim; 11-28-2008 at 10:34 AM.

11-28-2008, 10:29 AM	#7
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: Lets see your door panels Here are my original panels. s/t Attached Images __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

11-28-2008, 11:58 AM	#8
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Lets see your door panels richard, it looks like the pannel wouldnt go back into the hole cut out in the door wtih carpet over it..im strongly considering doing mine somewhat like yours..... __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-28-2008, 01:00 PM	#9
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Lets see your door panels You can buy these from Classic Parts or LMC. The Venders here can probably get them also. Attached Images

12-04-2008, 09:08 PM	#10
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: Lets see your door panels Here's mine, they're kind of a hybrid.70 panels with 72 armrests with wooden insert,covered in black Ultra-leather Attached Images __________________ greg http://community.webshots.com/user/68406Stepside



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.