New wheels for the 67(Ridler 695) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldspowered67C10 · 10-17-2011, 05:11 PM

My wheels came in today. I ended up going the cheap route and getting some cast wheels. These are Ridler 695 in grey(very similar to Boss 338). Sizes are 20x10 with 5.5" bs and 20x8.5 with 4.75" bs. Tires are Nitto invo 245/40-20 and 295/35-20. Front suspension has CPP 13" brakes on their modular spindle. Rear axle in factory narrow 67 unit w/ 5-lug axle conversion and CPP 12" lincoln caliper kit.

These things bolted right up, center bore is plenty big and deep. Backspace looks like its gonna work but only driving will tell for sure. Looks like the front might rub a bit on a really low truck while turning sharp but looks like Im gonna have .5" clearance between the inside of the rear tires and the rear fender well.

Heres some pics:

big_al_71 · 10-17-2011, 05:13 PM

Wheels look great as so does the truck.....

NuttinSpecial · 10-17-2011, 06:31 PM

Looks great.
I wanted to get the boss 338 for my car but the wheel&tire shop says they dont come staggered (even though i saw a truck in truckin with 20x8.5 and 20x10) so i should look into these.
How much you spend?
Posted via Mobile Device

magwakeenercew2jh · 10-17-2011, 07:22 PM

Quote:

Originally Posted by NuttinSpecial

Looks great.
I wanted to get the boss 338 for my car but the wheel&tire shop says they dont come staggered (even though i saw a truck in truckin with 20x8.5 and 20x10) so i should look into these.
How much you spend?
Posted via Mobile Device

No offense to anyone intended, but I'd go to a different wheel & tire shop.

As for the oldspowered67C10 truck? Very, very nice. Wheels, body, tires, stance. All of it. Bravo!

NuttinSpecial · 10-17-2011, 07:29 PM

Quote:

Originally Posted by magwakeenercew2jh

No offense to anyone intended, but I'd go to a different wheel & tire shop.

Yeah my dad has known the owner for 20 years and he always hooks us up and gives us a good deal. (saved us $400 on a set of intro vistas) Which is why i wouldnt go anywhere else. I just dont know why they said they cant get the 338s staggered?
Posted via Mobile Device

magwakeenercew2jh · 10-17-2011, 07:50 PM

Quote:

Originally Posted by NuttinSpecial

I just dont know why they said they cant get the 338s staggered?
Posted via Mobile Device

If they said they "wouldn't", they were right.
If they said they "couldn't", they were wrong.

My guys (Wheel King in Fresno, CA), had (2) 20 x 10; (2) 20 x 8.5 338's the next morning from the distributor.

Bennett68C10 · 10-17-2011, 09:30 PM

Those wheels look good, nice truck too.
Posted via Mobile Device

chevychase · 10-18-2011, 12:15 AM

Quote:

Originally Posted by Bennett--G4L

Those wheels look good, nice truck too.
Posted via Mobile Device

72BlckButy · 10-18-2011, 12:19 AM

Lookin' good!

oldspowered67C10 · 10-19-2011, 04:28 AM

[QUOTE]How much you spend?/QUOTE]
Wheels and tires, mounted balanced and delivered $1950

Bruce G · 04-08-2012, 01:09 PM

Got my new Ridlers on.

brans72 · 04-08-2012, 01:37 PM

There a build on the truck or more pictures of it?

Bruce G · 04-08-2012, 03:42 PM

Quote:

Originally Posted by brans72

There a build on the truck or more pictures of it?

I have a couple pictures from last fall with the old wheels and tires. No build thread I bought the truck last summer as you see it.

10-17-2011, 05:11 PM	#1
oldspowered67C10 Registered User Join Date: Jan 2006 Location: Cherry Valley,Ca Posts: 468	New wheels for the 67(Ridler 695) My wheels came in today. I ended up going the cheap route and getting some cast wheels. These are Ridler 695 in grey(very similar to Boss 338). Sizes are 20x10 with 5.5" bs and 20x8.5 with 4.75" bs. Tires are Nitto invo 245/40-20 and 295/35-20. Front suspension has CPP 13" brakes on their modular spindle. Rear axle in factory narrow 67 unit w/ 5-lug axle conversion and CPP 12" lincoln caliper kit. These things bolted right up, center bore is plenty big and deep. Backspace looks like its gonna work but only driving will tell for sure. Looks like the front might rub a bit on a really low truck while turning sharp but looks like Im gonna have .5" clearance between the inside of the rear tires and the rear fender well. Heres some pics: Attached Images

10-17-2011, 05:13 PM	#2
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: New wheels for the 67(Ridler 695) Wheels look great as so does the truck..... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

10-17-2011, 06:31 PM	#3
NuttinSpecial Registered User Join Date: Apr 2011 Location: Houston Texas Posts: 207	Re: New wheels for the 67(Ridler 695) Looks great. I wanted to get the boss 338 for my car but the wheel&tire shop says they dont come staggered (even though i saw a truck in truckin with 20x8.5 and 20x10) so i should look into these. How much you spend? Posted via Mobile Device

10-17-2011, 09:30 PM	#7
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: New wheels for the 67(Ridler 695) Those wheels look good, nice truck too. Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

10-18-2011, 12:19 AM	#9
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: New wheels for the 67(Ridler 695) Lookin' good! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

10-19-2011, 04:28 AM	#10
oldspowered67C10 Registered User Join Date: Jan 2006 Location: Cherry Valley,Ca Posts: 468	Re: New wheels for the 67(Ridler 695) [QUOTE]How much you spend?/QUOTE] Wheels and tires, mounted balanced and delivered $1950

04-08-2012, 01:09 PM	#11
Bruce G Registered User Join Date: Oct 2011 Location: Nova Scotia Posts: 23	Re: New wheels for the 67(Ridler 695) Got my new Ridlers on. Attached Images

04-08-2012, 01:37 PM	#12
brans72 Registered User Join Date: Dec 2009 Location: Durham,NC Posts: 636	Re: New wheels for the 67(Ridler 695) There a build on the truck or more pictures of it?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.