how do kickpanel speakers install? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

matt_field · 05-22-2002, 10:03 PM

do you cut anything or do they just form over your existing kick panel... thanks alot

**oldiron** · 05-22-2002, 10:11 PM

I have to trim part of the panel to fit the bottom of the dash. The hardest part was to locate the screw holes for the vent handles.
You may have to add a screw to hold the panel a little flater to the kick panel to give clearance to the emergancy brake pedal also. Other than that I had them in under an hour.

------------------
72 GMC 3/4 ton custom camper
72 Chev 3/4 ton Suburban
56 chev 2dr wagon
56 chev 2dr belair htp
48 case tractor
47 ply
41 caddy

Arlington Washington not the end of the earth but can be seen from here.

photoglg · 05-23-2002, 07:50 PM

I just installed them this week. They have to be cut, on the ones I got the cut marks were etched on the panel. I had to use a few screws to mount them. The main problem I have is the dimmer switch is under the speaker and is hard to get too.

------------------

05-22-2002, 10:03 PM	#1
matt_field Registered User Join Date: Apr 2001 Location: Detroit Lakes, Minnesota Posts: 885	how do kickpanel speakers install? do you cut anything or do they just form over your existing kick panel... thanks alot __________________ 1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles

05-22-2002, 10:11 PM	#2
oldiron Designated Grumpy Old Man Join Date: Oct 2001 Location: arlington, washington usa Posts: 3,092	I have to trim part of the panel to fit the bottom of the dash. The hardest part was to locate the screw holes for the vent handles. You may have to add a screw to hold the panel a little flater to the kick panel to give clearance to the emergancy brake pedal also. Other than that I had them in under an hour. ------------------ 72 GMC 3/4 ton custom camper 72 Chev 3/4 ton Suburban 56 chev 2dr wagon 56 chev 2dr belair htp 48 case tractor 47 ply 41 caddy Arlington Washington not the end of the earth but can be seen from here. __________________ Never let the truth get in the way of a good story 71 Chev 1/2 ton 4X4 LWB Fleetside SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=361222 http://www.youtube.com/watch?v=1LgREwtDfaA 68 Chev 1 ton flat bed http://www.youtube.com/watch?v=0bO8szzlD4A 56 Chev Handyman Wagon http://www.youtube.com/watch?v=9y-6ddpBTkM http://www.youtube.com/watch?v=lbLzZ7zY8wA 56 Chev Belair http://67-72chevytrucks.com/vboard/s...d.php?t=410667 http://www.youtube.com/watch?v=xoW0Ei7ZNIg

05-23-2002, 07:50 PM	#3
photoglg Registered User Join Date: Jul 2001 Location: Oxnard, CA Posts: 143	I just installed them this week. They have to be cut, on the ones I got the cut marks were etched on the panel. I had to use a few screws to mount them. The main problem I have is the dimmer switch is under the speaker and is hard to get too. ------------------ __________________ 1969 GMC S/B S/S 3" drop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.