Difference between coils and blocks? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72gmcshorty · 02-17-2010, 08:45 PM

I am wanting to lower the back of my truck about 6". I know there are drop coils and drop coils plus blocks. Whats the difference between using just coils and coils plus blocks?

SCOTI · 02-18-2010, 01:38 AM

Quote:

Originally Posted by 72gmcshorty

I am wanting to lower the back of my truck about 6". I know there are drop coils and drop coils plus blocks. Whats the difference between using just coils and coils plus blocks?

4" coils plus blocks allow running a standard length shock w/factory brackets. 6" drop coils alone are going to be too much drop & will typically require other mods: modifying the OE shock brackets; using 'drop' shocks; or replacing the OE brackets w/a shock relocator kit.

Of the trucks I've ridden in, 4" coils w/blocks rode better vs. 6" coils. They weren't 'apples to apples' set-ups (different manufacturer springs & shocks) so it's just a subjective opinion.

sv10001975 · 02-20-2010, 07:54 PM

there are also so other advantages to using the blocks, but I have heard that the 4" spring and 2" block can cause some problems on a 15" wheel. you also get the advantage of keeping you instant center of you suspension in a better location vs. the 6" lowering spring. i have 6" springs and will changing to 4" springs very shortly. all i am waiting on is trying to confirm the 2" block and 15" wheel interference issue.

SCOTI · 02-20-2010, 08:30 PM

The 'interference' issue w/2" blocks is the bottom edge of the shock mount & u-bolts are just past the scrub line of the wheel. In the event of tire failure @ speed, there is a possibility of the mount or bolt contacting the road which can lead to loss of control.

1.5" blocks work w/15" wheels.

sv10001975 · 02-20-2010, 09:23 PM

do you happen to know the length u bolt needed for the 1.5" blocks? this way I can go ahead order the bolts while I make my blocks.

SCOTI · 02-21-2010, 04:17 AM

Quote:

Originally Posted by sv10001975

do you happen to know the length u bolt needed for the 1.5" blocks? this way I can go ahead order the bolts while I make my blocks.

I can go measure just as easily as you can. Put a tape to your current ones & add 1.5". Done....

If there's some reason you cant measure yours, let us know.

72gmcshorty · 02-22-2010, 07:29 PM

would 5" spring and 1" block have any issues?

**N2TRUX** · 02-22-2010, 08:42 PM

Quote:

Originally Posted by 72gmcshorty

would 5" spring and 1" block have any issues?

They might not have an issues, but I have found the more drop you can gain from "static" changes the better off you are. Ok, let throw a disclaimer and say in "most" cases.

What that means is try for the best option other than spring drop. Anything more than a 2" spring up front and a 4" spring in the rear and the ride quality starts to degrade.

robzilla · 02-22-2010, 08:51 PM

does anyone have some pictures of the setup? i'm looking to do the same with blocks and coils.

thanks

02-17-2010, 08:45 PM	#1
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Difference between coils and blocks? I am wanting to lower the back of my truck about 6". I know there are drop coils and drop coils plus blocks. Whats the difference between using just coils and coils plus blocks? __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

02-20-2010, 07:54 PM	#3
sv10001975 Registered User Join Date: Dec 2007 Location: Macon,GA Posts: 62	Re: Difference between coils and blocks? there are also so other advantages to using the blocks, but I have heard that the 4" spring and 2" block can cause some problems on a 15" wheel. you also get the advantage of keeping you instant center of you suspension in a better location vs. the 6" lowering spring. i have 6" springs and will changing to 4" springs very shortly. all i am waiting on is trying to confirm the 2" block and 15" wheel interference issue.

02-20-2010, 08:30 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,928	Re: Difference between coils and blocks? The 'interference' issue w/2" blocks is the bottom edge of the shock mount & u-bolts are just past the scrub line of the wheel. In the event of tire failure @ speed, there is a possibility of the mount or bolt contacting the road which can lead to loss of control. 1.5" blocks work w/15" wheels. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 02-20-2010 at 08:30 PM.

02-20-2010, 09:23 PM	#5
sv10001975 Registered User Join Date: Dec 2007 Location: Macon,GA Posts: 62	Re: Difference between coils and blocks? do you happen to know the length u bolt needed for the 1.5" blocks? this way I can go ahead order the bolts while I make my blocks.

02-22-2010, 07:29 PM	#7
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Re: Difference between coils and blocks? would 5" spring and 1" block have any issues? __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

02-22-2010, 08:51 PM	#9
robzilla Registered User Join Date: Nov 2009 Location: castlegar,b.c Posts: 277	Re: Difference between coils and blocks? does anyone have some pictures of the setup? i'm looking to do the same with blocks and coils. thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.