WTB: 30 3/4 5 lug rear axles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stevelindsay · 05-18-2008, 02:07 AM

looking for 69 5 lug rear axles.thank you

**special-K** · 05-18-2008, 02:42 AM

Are you looking for 30 3/4t 5-lug rear axles?Good luck finding one.I don`t know there is such a thing.
Or,are you looking for 69 5-lug rear axles?Leaf spring or coil?Why 69...or 30 for that matter?Are you looking for a`69 5-lug rear axle?Back to good luck on that one,too.I don`t know of such as that,either.Maybe I`m misunderstanding?

tommypic · 05-18-2008, 02:46 AM

Do like I did if you have a 6 lug just get them redrilled to 5

stevelindsay · 05-18-2008, 02:49 AM

ok you got me all confused.

looking for 5 lug conversion axles

iam changing from 6 lug to 5 lug on my 69

hope this cleared this up

thank you.

stevelindsay · 05-18-2008, 02:51 AM

I was thinking about getting them redrilled but the prices people charge around here I am better off getting new ones and redrilling my drums myself

Does this sound smart?

Blue_71 · 05-18-2008, 04:59 AM

i have a set of 5 lug axles a buddy of mine put in a 70 that i later bought and parted, ill measure them and get back with you

**67 cst swb** · 05-18-2008, 05:26 AM

If I remember correctly, Early Classics sells a 6-lug to 5-lug conversion axle... I'll check and edit here.

**67 cst swb** · 05-18-2008, 05:36 AM

Quote:

Originally Posted by 67 cst swb

If I remember correctly, Early Classics sells a 6-lug to 5-lug conversion axle... I'll check and edit here.

Yes... check this out-

copied from Early Classic website-
1963-'69 12-Bolt Rear-End 5-Lug Conversion Axles (Pair)
Converting your 1963-'69(30 Spline) C-10 truck rear end to 5 lugs just got a whole lot easier, thanks to Early Classic's new conversion 5 on 5" bolt pattern axles. These precision machined parts are American-made, and eliminate the need to re-drill your original axle flanges to accept the newer 5-lug wheels.
part# is: #02-6569AXL $279.00 or #902-6569AXLK $319.00 w/ bearings and seals

link- http://www.earlyclassic.com/catalog.aspx

I had my factory 6 lugs redrilled to 5-lug is was about $100.00 if I remember right.

tommypic · 05-18-2008, 01:31 PM

I can get mine re drilled alot cheaper , just use bearings ands seals for a 91 1/2 ton Chevy truck . I might be wrong on the 3/4 tho

FrankieD · 02-11-2011, 12:09 PM

I know this is an old thread but will 71 axels fit a 70?

**PICKMUP** · 02-11-2011, 12:37 PM

Quote:

Originally Posted by FrankieD

I know this is an old thread but will 71 axels fit a 70?

Yes...same rear width

FrankieD · 02-11-2011, 12:49 PM

Kool, I can get new axels from RockAuto.com for $147 ea with new bearings and seals or $325 for the set w/shipping does that sound like s decent price?

4oldcars · 02-11-2011, 05:45 PM

I have a complete rear axel you can have for $75 and I'm near to you. Don't know for sure the year. 71 or 72? An email address will get you a picture.

FrankieD · 02-11-2011, 09:35 PM

Quote:

Originally Posted by 4oldcars

I have a complete rear axel you can have for $75 and I'm near to you. Don't know for sure the year. 71 or 72? An email address will get you a picture.

Never mind the PM I think you didn't notice the thread started in 08

4oldcars · 02-12-2011, 10:07 AM

How does an '08 thread come up on a current page? Did I fall asleep?

FrankieD · 02-12-2011, 12:27 PM

Quote:

Originally Posted by 4oldcars

How does an '08 thread come up on a current page? Did I fall asleep?

Just wasn't many responses

**special-K** · 02-12-2011, 01:10 PM

Thread satrter...Post#1 5/18/08

Quote:

Originally Posted by stevelindsay

looking for 69 5 lug rear axles.thank you

Yesterday:

Quote:

Originally Posted by FrankieD

I know this is an old thread but will 71 axels fit a 70?

This is what happens when someone searches and brings up a three year old WTB thread from the parts board to ask a question that should have been posted in the truck message board in a new thread started by themselves to ask their specific question.

I saw "You live near me" and thought,"HUH?" Maryland is near Illinois now?

But,the thread starter is in Maryland....sheesh! pretty confusing when it's all so simple.

FrankieD · 02-12-2011, 02:11 PM

Quote:

Originally Posted by special-K

Thread satrter...Post#1 5/18/08

Yesterday:

This is what happens when someone searches and brings up a three year old WTB thread from the parts board to ask a question that should have been posted in the truck message board in a new thread started by themselves to ask their specific question.

I saw "You live near me" and thought,"HUH?" Maryland is near Illinois now?

But,the thread starter is in Maryland....sheesh! pretty confusing when it's all so simple.

Yea you are right I don't know on the Sea Ray site I am on they restart threads 3yro threads and it just takes off but I think the the Quotes need to be used more.

05-18-2008, 02:42 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: WTB: 30 3/4 5 lug rear axles Are you looking for 30 3/4t 5-lug rear axles?Good luck finding one.I don`t know there is such a thing. Or,are you looking for 69 5-lug rear axles?Leaf spring or coil?Why 69...or 30 for that matter?Are you looking for a`69 5-lug rear axle?Back to good luck on that one,too.I don`t know of such as that,either.Maybe I`m misunderstanding? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-18-2008, 02:46 AM	#3
tommypic Registered User Join Date: Jan 2008 Location: Piedmont , SC Posts: 728	Re: WTB: 30 3/4 5 lug rear axles Do like I did if you have a 6 lug just get them redrilled to 5 __________________ My ZipCode = 29673 2008 Silverado Z71 LTZ Wrecked New Ride SOLD 71-72 Custom A/C Parts Truck < selling parts 67 Chevy ShortStep SOLD 67 GMC SWB Step <-- For Sell 67 Chevy SWB Step <-- working on 2000 Road King <-- SOLD 97 F150 my ride for now 2006 Escape wifes ride HELP SUPPORT THE BOARD http://67-72chevytrucks.com/vboard/payments.php Great How To Thread http://67-72chevytrucks.com/vboard/s...d.php?t=157669 Vendor Sites http://67-72chevytrucks.com/links/browselinks.php?c=2

05-18-2008, 02:49 AM	#4
stevelindsay Registered User Join Date: Jul 2007 Location: ft meade md Posts: 59	Re: WTB: 30 3/4 5 lug rear axles ok you got me all confused. looking for 5 lug conversion axles iam changing from 6 lug to 5 lug on my 69 hope this cleared this up thank you.

05-18-2008, 02:51 AM	#5
stevelindsay Registered User Join Date: Jul 2007 Location: ft meade md Posts: 59	Re: WTB: 30 3/4 5 lug rear axles I was thinking about getting them redrilled but the prices people charge around here I am better off getting new ones and redrilling my drums myself Does this sound smart?

05-18-2008, 05:26 AM	#7
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: WTB: 30 3/4 5 lug rear axles If I remember correctly, Early Classics sells a 6-lug to 5-lug conversion axle... I'll check and edit here. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White 2002 Chevrolet 1500HD 4x4 Crew Cab 6.0L 4L80E Red

05-18-2008, 02:07 AM	#1
stevelindsay Registered User Join Date: Jul 2007 Location: ft meade md Posts: 59	WTB: 30 3/4 5 lug rear axles looking for 69 5 lug rear axles.thank you

05-18-2008, 01:31 PM	#9
tommypic Registered User Join Date: Jan 2008 Location: Piedmont , SC Posts: 728	Re: WTB: 30 3/4 5 lug rear axles I can get mine re drilled alot cheaper , just use bearings ands seals for a 91 1/2 ton Chevy truck . I might be wrong on the 3/4 tho __________________ My ZipCode = 29673 2008 Silverado Z71 LTZ Wrecked New Ride SOLD 71-72 Custom A/C Parts Truck < selling parts 67 Chevy ShortStep SOLD 67 GMC SWB Step <-- For Sell 67 Chevy SWB Step <-- working on 2000 Road King <-- SOLD 97 F150 my ride for now 2006 Escape wifes ride HELP SUPPORT THE BOARD http://67-72chevytrucks.com/vboard/payments.php Great How To Thread http://67-72chevytrucks.com/vboard/s...d.php?t=157669 Vendor Sites http://67-72chevytrucks.com/links/browselinks.php?c=2

02-11-2011, 12:09 PM	#10
FrankieD Registered User Join Date: Jan 2011 Location: Gilberts IL. Posts: 2,488	Re: WTB: 30 3/4 5 lug rear axles I know this is an old thread but will 71 axels fit a 70? __________________ 94 k2500 EXCab Long Bed 350ci New Toy 95 K2500 Suburban New PlowTruck 454ci Support our Troops @ http://anyairman.com http://www.woundedwarriorproject.org/

02-11-2011, 12:49 PM	#12
FrankieD Registered User Join Date: Jan 2011 Location: Gilberts IL. Posts: 2,488	Re: WTB: 30 3/4 5 lug rear axles Kool, I can get new axels from RockAuto.com for $147 ea with new bearings and seals or $325 for the set w/shipping does that sound like s decent price? __________________ 94 k2500 EXCab Long Bed 350ci New Toy 95 K2500 Suburban New PlowTruck 454ci Support our Troops @ http://anyairman.com http://www.woundedwarriorproject.org/

02-11-2011, 05:45 PM	#13
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB: 30 3/4 5 lug rear axles I have a complete rear axel you can have for $75 and I'm near to you. Don't know for sure the year. 71 or 72? An email address will get you a picture. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

02-12-2011, 10:07 AM	#15
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: WTB: 30 3/4 5 lug rear axles How does an '08 thread come up on a current page? Did I fall asleep? __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.