Factory Slider Maybe ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 01-05-2011, 05:12 PM

This slider is in the '70 Chevy 3/4 CustomCamper 20 I picked up recently for parts. There is nothing mentioned in the SIPD label but is it possibly the fabled "factory" slider? Glass is marked "Cal-Tuff" at stationary glass corners and marked "Safety Glass" along with some other numbers and letters? Did a search and a couple of pics I found look really similar but still not sure. Has Phillips screws at the top edge of the frame at the upright channel supports, pop rivets at lower corners, latch looks quite similar to those I found on the search. No trim around the outside rubber seal. Anyone have any thoughts on this?

**leddzepp** · 01-05-2011, 05:23 PM

factory slider...I have one on my truck too.

c1069 · 01-06-2011, 12:05 AM

here is....I have one too and is for sale

71sierragrande · 01-06-2011, 12:34 AM

I had a '71 Cheyenne with one EXACTLY like that...

**70cst** · 01-06-2011, 03:08 AM

Factory Slider...

**special-K** · 01-06-2011, 09:47 AM

A factory slider would be listed on the SPID. They were not installed on the line,but on the factory lot post-production/pre-shipping. Other windows could be the exact same,just not factory if not listed on the SPID. They were commonly installed by dealers as well as truck outfitters and by owners. They were a hot item back then and they all pretty much looked the same.

**Ironhorse** · 01-07-2011, 09:35 AM

Since it is not listed on the SIPD label even tho it is the same style or type as the listed "factory sliding window" it doen't qualify as a "factory slider" by reading your post. Think I will be keeping this one for my-self as a replacement for the after market slider I have currently in my '71 4x4.

**70cst** · 01-07-2011, 09:44 AM

Quote:

Originally Posted by Ironhorse

Since it is not listed on the SIPD label even tho it is the same style or type as the listed "factory sliding window" it doen't qualify as a "factory slider" by reading your post. Think I will be keeping this one for my-self as a replacement for the after market slider I have currently in my '71 4x4.

Same same goes for 8 tracks. Also many trucks had am-fm radios installed at the dealers or owners as from 70 and before only am radios were avaliable. I think as long as it was a dealer options it's not a big deal when these type options are installed. JMHO

**leddzepp** · 01-07-2011, 11:44 AM

The dude typing up SPIDs that day could have left it off....you never know.

**70cst** · 01-07-2011, 11:52 AM

Quote:

Originally Posted by leddzepp

The dude typing up SPIDs that day could have left it off....you never know.

Very good point. Back in those days accuracy wasn't always job one.

**special-K** · 01-07-2011, 12:00 PM

Have people seen options left off? I hear people say they weren't accurate but I've never seen it. Dealers add parts from the parts department that are the same parts used on the assembly line. For that matter,any one of us can go buy the part or components to add a factory option.

peglegs · 01-07-2011, 12:51 PM

i have one like c1069's on my 67 and dont like the way it protrudes out the back of the opening & would like to change it out does anyone know of one that is "flat" like the new ones that are on the mkt today.

01-05-2011, 05:12 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,105	Factory Slider Maybe ? This slider is in the '70 Chevy 3/4 CustomCamper 20 I picked up recently for parts. There is nothing mentioned in the SIPD label but is it possibly the fabled "factory" slider? Glass is marked "Cal-Tuff" at stationary glass corners and marked "Safety Glass" along with some other numbers and letters? Did a search and a couple of pics I found look really similar but still not sure. Has Phillips screws at the top edge of the frame at the upright channel supports, pop rivets at lower corners, latch looks quite similar to those I found on the search. No trim around the outside rubber seal. Anyone have any thoughts on this? Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-05-2011, 05:23 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,992	Re: Factory Slider Maybe ? factory slider...I have one on my truck too. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

01-06-2011, 12:05 AM	#3
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: Factory Slider Maybe ? here is....I have one too and is for sale Attached Images

01-06-2011, 12:34 AM	#4
71sierragrande Petroleum User Join Date: Dec 2010 Location: San Diego, California Posts: 928	Re: Factory Slider Maybe ? I had a '71 Cheyenne with one EXACTLY like that... __________________ 1971 GMC Sierra Grande 2WD 1/2 ton, 350/400 auto 2008 Chevy Silverado 2WD 1/2 ton LT1 5.3L auto Last edited by 71sierragrande; 01-06-2011 at 12:35 AM.

01-06-2011, 03:08 AM	#5
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,363	Re: Factory Slider Maybe ? *Factory Slider...* __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

01-06-2011, 09:47 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Factory Slider Maybe ? A factory slider would be listed on the SPID. They were not installed on the line,but on the factory lot post-production/pre-shipping. Other windows could be the exact same,just not factory if not listed on the SPID. They were commonly installed by dealers as well as truck outfitters and by owners. They were a hot item back then and they all pretty much looked the same. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-06-2011 at 09:54 AM.

01-07-2011, 09:35 AM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,105	Re: Factory Slider Maybe ? Since it is not listed on the SIPD label even tho it is the same style or type as the listed "factory sliding window" it doen't qualify as a "factory slider" by reading your post. Think I will be keeping this one for my-self as a replacement for the after market slider I have currently in my '71 4x4. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-07-2011, 11:44 AM	#9
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,992	Re: Factory Slider Maybe ? The dude typing up SPIDs that day could have left it off....you never know. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

01-07-2011, 12:00 PM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Factory Slider Maybe ? Have people seen options left off? I hear people say they weren't accurate but I've never seen it. Dealers add parts from the parts department that are the same parts used on the assembly line. For that matter,any one of us can go buy the part or components to add a factory option. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-07-2011, 12:51 PM	#12
peglegs Registered User Join Date: Jul 2009 Location: grants pass, oregon Posts: 390	Re: Factory Slider Maybe ? i have one like c1069's on my 67 and dont like the way it protrudes out the back of the opening & would like to change it out does anyone know of one that is "flat" like the new ones that are on the mkt today. __________________ 1990 chevy 4x4 with a 1940 IHC body



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.