|
10-08-2011, 11:37 PM
|
#1 |
|
Registered User
 
Join Date: Feb 2004
Location: brownfield texas (west texas)
Posts: 1,936
|
bump stops
Alright guys. I yanked my control arms and spidlest to day to paint them up and I relized that I never did anything to the bump stops. I have 71-72 arms and am running 3" drop springs and 2.5" spindles. anyone else out there running these (I know there are) if so did you modify yours or replace them with after market. does the bottom bs mounting bracket on the control arm need reworked. or is every thing peachy with the stock set up I don't plan on 4 wheeling but I don't want spine jerking every pot hole eather. I also don't know if they keep things from binding and if you shorten them will that caus bad effects if something were to bind while you were turning
__________________
The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS |
|
|
|
10-09-2011, 12:04 AM
|
#2 |
|
67-72 parts collector,…
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,685
|
Re: bump stops
I trim the bump stop mount off and leave just enough of the "steering stop" to contact the spindle with the wheels turned.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
|
|
|
|
10-11-2011, 11:57 AM
|
#3 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
Re: bump stops
I did the same thing on mine. Also, I drilled a hole in the lower arms & added a traction bar snubber(rubber), as a new bumpstop. crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
