Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-08-2011, 11:43 PM | #1 |
Registered User
Join Date: Feb 2009
Location: slurrey, bc.
Posts: 1,134
|
engine ID help... Running the numbers..
there's a 350 in my brothers truck he couldn't find out what it really is.. I took a look at it and i've never seen these numbers before..
on the rear pad it says it's a hecho en mexico block with the number 10066030 and on the front cyl. deck pad it has 1m1109 6vp anyone know what this thing is as im clueless.. thanks.
__________________
-'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler. |
08-09-2011, 12:00 AM | #2 |
Account Suspended
Join Date: Jul 2007
Location: Plumas Lake, Ca.
Posts: 1,009
|
Re: engine ID help... Running the numbers..
Sounds like a "Made in Mexico" 350 target crate engine.
|
08-09-2011, 12:25 AM | #3 |
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,134
|
Re: engine ID help... Running the numbers..
Its most likely one of these
10066036...350...........2 or 4...Target Master/Goodwrench crate motor, 2-piece rear seal, "Hecho en Mexico" 10066038...350.....92....4...Goodwrench crate motor, 2-piece rear seal, "Hecho en Mexico" |
08-22-2011, 11:43 PM | #4 |
Registered User
Join Date: Aug 2011
Location: Warren, Michigan
Posts: 16
|
Re: engine ID help... Running the numbers..
Hi,
I have the same casting # ending with the 030. Could be an 8 or a 6 on the end but everywhere I have found shows 350. May be a silly/obvious question but, this would be a gen 1 engine right? |
08-23-2011, 12:59 AM | #5 |
is a fungineer
Join Date: Jan 2009
Location: Bakersfield, CA
Posts: 795
|
Re: engine ID help... Running the numbers..
Yes, should be Gen 1 style.
__________________
2003 S10, 2.2 auto- the daily driver, currently with a 2"/2" drop and some minor engine bolt-ons 1978 Impala 2-door, race 350/T350 - the new race car, in progress 1968 Chevy C10 longbed- 3/5 drop, currently undergoing a heart transplant |
11-19-2012, 06:29 PM | #6 |
Registered User
Join Date: Jan 2010
Location: Mesa Az.
Posts: 38
|
Re: engine ID help... Running the numbers..
Mongoose, I have that same engine in my 68 Chevy C-30. It was originally a 327 but now has a 10066030 Good-wrench in it. The marks on the front tab on mine are 3VF and that is all it has. I know that post you put in is three years old, but,I actually wanted to see if you may have got anymore info on this number. My bigger issue is the exhaust manifolds. They are not for a truck, the number says that they are in fact off of a 79 Pontiac or Buick with a 305 Chev in it.
|
Bookmarks |
|
|