1969 c10 front disc brake conversion question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

newmanseptic · 05-10-2016, 10:24 AM

I am currently building this truck and have a belltech lowering kit with 3 inch drop spindles on the front. The kit says it requires 71-72 disc brake conversion or equivalent,all the brake conversions I have seen so far say you have to use their spindles and its only 2.5 inch drop. Any info would be appreciated to how get a disc brake conversion kit to work with my current belltech spindles.

sean1969c10 · 05-10-2016, 06:52 PM

I'm not 100% sure but it sounds like stock 71-72 disc brake parts are what you need.

05-10-2016, 10:24 AM	#1
newmanseptic Registered User Join Date: May 2016 Location: Attalla Posts: 13	1969 c10 front disc brake conversion question I am currently building this truck and have a belltech lowering kit with 3 inch drop spindles on the front. The kit says it requires 71-72 disc brake conversion or equivalent,all the brake conversions I have seen so far say you have to use their spindles and its only 2.5 inch drop. Any info would be appreciated to how get a disc brake conversion kit to work with my current belltech spindles.

05-10-2016, 06:52 PM	#2
sean1969c10 Registered User Join Date: Mar 2008 Location: Powhatan, Va. Posts: 376	Re: 1969 c10 front disc brake conversion question I'm not 100% sure but it sounds like stock 71-72 disc brake parts are what you need. __________________ Sean "If your gonna be dumb, you gotta be tough" 1960 Chevy Impala Sedan - my 25 year search is over!! 1969 C-10 longbed - Nice day DD 1970 Chevy Nova - Street and Strip Project 2002 Acura MDX my DD 2007 Honda Odssey - My Wife's "Mommy Van"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.