|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-05-2012, 11:37 AM
|
#1 |
|
Registered User
Join Date: Sep 2011
Location: Nevada City, CA
Posts: 908
|
How much width works inside the fender lines?
So, for a variety of reasons I'm now pretty sure I want to swap front axles. Stock WMS measurement is 62", I think?
The truck is torn down, so I cant readily measure space right now. How much wider than 62" can I go with a 235 series tire before I get into trouble? I should be fine with 64, yeah? |
|
|
|
12-05-2012, 11:51 AM
|
#2 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,367
|
Re: How much width works inside the fender lines?
I think that the 62 inches is the centerline of the tread of a stock tire on a stock wheel.
There are a lot of factors involved when you start swapping tires around. diameter, width and offset of the wheel you are using. Diameter, section width and other criteria of the tire. Suspension height. The tire/wheel combo that clears fine on a stock height truck might not clear as well on a lowered truck.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
