The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-25-2017, 02:56 PM   #1
Haru
Registered User
 
Haru's Avatar
 
Join Date: Apr 2017
Location: Sacramento, CA
Posts: 53
Air ride almost done!

Well, it took a few rookies with no experience and four days (two weekends) to complete the rivet removal, fabrication ETC for the rear end. The drop spindles are installed in the front and both travel tanks have been unbolted from the bed (without a break!). Need to do the shocks and bags up front still. None of us had welded, plasma cut or have tackled such an adventure. Many thanks to the direct messages and all the threads and knowledge here. Air management setup is next, we'll see how long that takes.
Attached Images
    
__________________
-71 C10 long bed, 402
-91 Camaro Z28, B2L 350
-96 Tahoe 2 door 2wd
-15 Tahoe LT
-16 Lexus RC 350 F sport
Haru is offline   Reply With Quote
Old 09-25-2017, 03:49 PM   #2
azle
Registered User
 
Join Date: Feb 2017
Location: Fort Worth Texas
Posts: 69
Re: Air ride almost done!

Looks LOW! Nice work!

Azle
azle is offline   Reply With Quote
Old 09-25-2017, 08:32 PM   #3
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Thumbs up Re: Air ride almost done!

Looks good from SC sir!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 09-25-2017, 10:43 PM   #4
Haru
Registered User
 
Haru's Avatar
 
Join Date: Apr 2017
Location: Sacramento, CA
Posts: 53
Re: Air ride almost done!

Thanks!
__________________
-71 C10 long bed, 402
-91 Camaro Z28, B2L 350
-96 Tahoe 2 door 2wd
-15 Tahoe LT
-16 Lexus RC 350 F sport
Haru is offline   Reply With Quote
Old 09-25-2017, 10:57 PM   #5
IRQVET
Registered User
 
IRQVET's Avatar
 
Join Date: Aug 2017
Location: Tallahassee, FL.
Posts: 125
Re: Air ride almost done!

Which air ride system did you go with?
__________________
1998 Chevy Tahoe 2D
1949 Willys CJ2A
1967 C-20 Flatbed (Sold)
IRQVET is offline   Reply With Quote
Old 09-25-2017, 11:24 PM   #6
Haru
Registered User
 
Haru's Avatar
 
Join Date: Apr 2017
Location: Sacramento, CA
Posts: 53
Re: Air ride almost done!

Quote:
Originally Posted by IRQVET View Post
Which air ride system did you go with?
Pro 2, dual compressors 5 gallon tank and Accuair e- level. Mixed bag of parts otherwise, with AVS parallel 4 link, behind axle universal bag mounts. Airlift dominator 2600 bags, Mcgauhy's 2.5" drop spindles and so on.
__________________
-71 C10 long bed, 402
-91 Camaro Z28, B2L 350
-96 Tahoe 2 door 2wd
-15 Tahoe LT
-16 Lexus RC 350 F sport
Haru is offline   Reply With Quote
Old 09-26-2017, 06:40 AM   #7
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Thumbs up Re: Air ride almost done!

You need to get those shocks straightened out while your at it. Whole lot easier now than after the bed is reinstalled. You want them straight up and down are as close as you can get them. Right now they are just along for the ride they want do anything at that kind of angle except roll with the flow of the truck.

__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 09-26-2017, 01:53 PM   #8
Haru
Registered User
 
Haru's Avatar
 
Join Date: Apr 2017
Location: Sacramento, CA
Posts: 53
Re: Air ride almost done!

Quote:
Originally Posted by Andy4639 View Post
You need to get those shocks straightened out while your at it. Whole lot easier now than after the bed is reinstalled. You want them straight up and down are as close as you can get them. Right now they are just along for the ride they want do anything at that kind of angle except roll with the flow of the truck.

We'll see what we com up with this weekend but you have a good point

The axle location is stock and you can see the hole we didn't use for stock upper location because the bolts on the C-notch were in the way for the original spot. so we used one and drilled over to the next spot.
__________________
-71 C10 long bed, 402
-91 Camaro Z28, B2L 350
-96 Tahoe 2 door 2wd
-15 Tahoe LT
-16 Lexus RC 350 F sport
Haru is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:51 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com