7.00x18 wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wwwbogercom@ll.net · 01-04-2009, 11:11 PM

bought a 69 c30 CST with 700x18 tires is this correct an option or has somebody put them on from an older truck?

**too much stuff** · 01-04-2009, 11:46 PM

I have a 72 3/4 ton with 17" wheels. I am not sure about the 18". It may be possible on a one ton i suppose. Does your truck have the cst/30 emblems on the fenders? Any pics?
And welcome...

wwwbogercom@ll.net · 01-04-2009, 11:56 PM

yes it has the emblems it is all correct but I dont know obout the wheels has bucket seat tach ac pb tinted glass built in STL MO Thanks

**too much stuff** · 01-05-2009, 12:17 AM

Sounds like a pretty neat truck. I think we will need to see pics. Is it in nice shape? What is the engine/trans combo?

**fine69** · 01-05-2009, 12:27 AM

I too have had a couple trucks with 17 inch stock wheels.

18's could be stock i suppose. Pics would tell us.

Welcome to the board.

wwwbogercom@ll.net · 01-05-2009, 12:38 AM

than you lock ring wheels with 4 ovals around the out side my 47 ton has 8 holes

**special-K** · 01-05-2009, 09:36 AM

That sounds like a special truck.A great find for sure.Yes,the 7.00-18/D (8 ply rating)tube types were an option (RPO R90).It should be listed on the SPID if from factory.Does the truck have the big 11,000# rear axle?(RPO H22)

**Joesjunk** · 01-05-2009, 12:56 PM

Sounds cool, would love to see some pics!!!

factorystock · 01-05-2009, 08:47 PM

The 8 hand hole 8 lug 18" split rim was around since the 40's and used up till the mid 60's, I think '68. The newer style 4 hand hole 8 lug rim 18" split rim is rare in this country, but was popular in Central and South America. It could have been a special order.

**special-K** · 01-06-2009, 09:02 AM

The 7.00-18s were an option and it sounds like this truck was a special order.Sommeone knew what they wanted.Dual wheels were available in 16,16.5,18,& 19.5".Singles were available in 16 & 16.5".There were quite a few tire choices back then,too.Mostly load range rating differences.

wwwbogercom@ll.net · 01-06-2009, 05:58 PM

thanks guys It does not have a code for the tire size the SPID it does have 4RO5RC DR WHEEL CONVERSION 4G60CA AUXILARY SPRING EQ GVW on door post is 10000 so i think it is a 7200 rear axle it has only one wheel cyl per side would like to know the diff ratio without taking the cover off but anyway its low

wwwbogercom@ll.net · 01-06-2009, 06:03 PM

PS will work on the pics have to figure out how to post

**special-K** · 01-06-2009, 06:42 PM

Just ask if you can`t figure the pictures.I used a tutorial in FAQ that tought me how to do it from Photobucket.I believe the 11,000# axle was the 5 & 10 pattern (5 front/10 rear) like medium duties.I thought I`d ask,even though I figured you would have mentioned the different lug pattern.
Which motor and transmission did it come with?It could be a 4.10 or 4.57 ratio if it came with a 350 and either the Chevrolet 4spd or Automatic.If it came with a 350,292,or 307 and New Process 4spd it would have 5.14s.

wwwbogercom@ll.net · 01-06-2009, 06:53 PM

350 4bbl 4spd also has munual throttle option

b.sharp · 02-24-2014, 04:05 PM

my '68 has the 4 whole 8 lug 18" wheels. I would like to find some replacement tires for it or put the equivelent 16" wheel/tires on it. Anyone know what size 16" tire would be the same diameter?

factorystock · 02-24-2014, 08:06 PM

Quote:

Originally Posted by b.sharp

my '68 has the 4 whole 8 lug 18" wheels. I would like to find some replacement tires for it or put the equivelent 16" wheel/tires on it. Anyone know what size 16" tire would be the same diameter?

Stay away from the 16", way to small. The 3 piece 18" lock ring wheels are not my wheel of choice either. Go with the solid 19.5" dual type wheel that was the factory option in 1968. They are harder to find, but the 19.5" wheel and tire combo have the same diameter as the 18" lock ring tire and wheel combo. Make sure they are off a 1970 and older vehicle for the same stud size. Can be found on 1970 and older step vans, bread trucks etc.

b.sharp · 02-24-2014, 09:37 PM

I have a very hard time finding any older vehicles around here. It seems they are way off the beaten path or have been scrapped. My 65 c30 has 16" dollies from the factory on it. I had not seen the 18's until this truck. I will keep my eye out for the 19.5" wheels but will not hold my breath.

**truckdude239** · 02-24-2014, 10:34 PM

235/85r16

01-04-2009, 11:11 PM	#1
wwwbogercom@ll.net Registered User Join Date: Jan 2009 Location: Murphysboro ILL Posts: 18	7.00x18 wheels bought a 69 c30 CST with 700x18 tires is this correct an option or has somebody put them on from an older truck?

01-04-2009, 11:46 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,714	Re: 7.00x18 wheels I have a 72 3/4 ton with 17" wheels. I am not sure about the 18". It may be possible on a one ton i suppose. Does your truck have the cst/30 emblems on the fenders? Any pics? And welcome... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-04-2009, 11:56 PM	#3
wwwbogercom@ll.net Registered User Join Date: Jan 2009 Location: Murphysboro ILL Posts: 18	Re: 7.00x18 wheels yes it has the emblems it is all correct but I dont know obout the wheels has bucket seat tach ac pb tinted glass built in STL MO Thanks

01-05-2009, 12:17 AM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,714	Re: 7.00x18 wheels Sounds like a pretty neat truck. I think we will need to see pics. Is it in nice shape? What is the engine/trans combo? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-05-2009, 12:27 AM	#5
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: 7.00x18 wheels I too have had a couple trucks with 17 inch stock wheels. 18's could be stock i suppose. Pics would tell us. Welcome to the board. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6

01-05-2009, 12:38 AM	#6
wwwbogercom@ll.net Registered User Join Date: Jan 2009 Location: Murphysboro ILL Posts: 18	Re: 7.00x18 wheels than you lock ring wheels with 4 ovals around the out side my 47 ton has 8 holes

01-05-2009, 09:36 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 7.00x18 wheels That sounds like a special truck.A great find for sure.Yes,the 7.00-18/D (8 ply rating)tube types were an option (RPO R90).It should be listed on the SPID if from factory.Does the truck have the big 11,000# rear axle?(RPO H22) __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-05-2009, 12:56 PM	#8
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: 7.00x18 wheels Sounds cool, would love to see some pics!!! __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

01-05-2009, 08:47 PM	#9
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,357	Re: 7.00x18 wheels The 8 hand hole 8 lug 18" split rim was around since the 40's and used up till the mid 60's, I think '68. The newer style 4 hand hole 8 lug rim 18" split rim is rare in this country, but was popular in Central and South America. It could have been a special order.

01-06-2009, 09:02 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 7.00x18 wheels The 7.00-18s were an option and it sounds like this truck was a special order.Sommeone knew what they wanted.Dual wheels were available in 16,16.5,18,& 19.5".Singles were available in 16 & 16.5".There were quite a few tire choices back then,too.Mostly load range rating differences. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-06-2009 at 09:08 AM.

01-06-2009, 05:58 PM	#11
wwwbogercom@ll.net Registered User Join Date: Jan 2009 Location: Murphysboro ILL Posts: 18	Re: 7.00x18 wheels thanks guys It does not have a code for the tire size the SPID it does have 4RO5RC DR WHEEL CONVERSION 4G60CA AUXILARY SPRING EQ GVW on door post is 10000 so i think it is a 7200 rear axle it has only one wheel cyl per side would like to know the diff ratio without taking the cover off but anyway its low

01-06-2009, 06:03 PM	#12
wwwbogercom@ll.net Registered User Join Date: Jan 2009 Location: Murphysboro ILL Posts: 18	Re: 7.00x18 wheels PS will work on the pics have to figure out how to post

01-06-2009, 06:42 PM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 7.00x18 wheels Just ask if you can`t figure the pictures.I used a tutorial in FAQ that tought me how to do it from Photobucket.I believe the 11,000# axle was the 5 & 10 pattern (5 front/10 rear) like medium duties.I thought I`d ask,even though I figured you would have mentioned the different lug pattern. Which motor and transmission did it come with?It could be a 4.10 or 4.57 ratio if it came with a 350 and either the Chevrolet 4spd or Automatic.If it came with a 350,292,or 307 and New Process 4spd it would have 5.14s. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-06-2009 at 08:34 PM.

01-06-2009, 06:53 PM	#14
wwwbogercom@ll.net Registered User Join Date: Jan 2009 Location: Murphysboro ILL Posts: 18	Re: 7.00x18 wheels 350 4bbl 4spd also has munual throttle option

02-24-2014, 04:05 PM	#15
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: 7.00x18 wheels my '68 has the 4 whole 8 lug 18" wheels. I would like to find some replacement tires for it or put the equivelent 16" wheel/tires on it. Anyone know what size 16" tire would be the same diameter? Attached Images



Register or Log In To remove these advertisements.

02-24-2014, 09:37 PM	#17
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: 7.00x18 wheels I have a very hard time finding any older vehicles around here. It seems they are way off the beaten path or have been scrapped. My 65 c30 has 16" dollies from the factory on it. I had not seen the 18's until this truck. I will keep my eye out for the 19.5" wheels but will not hold my breath.

02-24-2014, 10:34 PM	#18
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,224	Re: 7.00x18 wheels 235/85r16 __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

Register or Log In To remove these advertisements.