Stainless steel exhaust pipe - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CWW · 09-10-2021, 06:02 PM

How bad is it to bend 2" 18 guage stainless steel exhaust pipe?

**dagnabbitt** · 09-10-2021, 10:04 PM

Quote:

Originally Posted by CWW

How bad is it to bend 2" 18 guage stainless steel exhaust pipe?

Not sure what you mean. Do you mean how difficult is it, or is it inadvisable.

CWW · 09-11-2021, 03:52 AM

Quote:

Originally Posted by dagnabbitt

Not sure what you mean. Do you mean how difficult is it, or is it inadvisable.

Both actually. I have access to a big power bender for conduit and to some big hand benders at my job I don't want to destroy the equipment or my pipes.

**Ol Blue K20** · 09-11-2021, 07:57 AM

I wouldn't do it, a 555 won't make tight enough bends. It would likely kink the pipe too.

**Getter-Done** · 09-11-2021, 08:23 AM

What degree of bend are you wanting?

Is buying the elbows an option for your project?

I tried the bending pipe thing.
I packed it with sand and plugged the pipe tight.

It worked for what I was doing.

I don't think stainless would turn out looking Good

,....///////

CWW · 09-11-2021, 09:19 AM

I would be going from the headers to the back of my 68 chevy stepper. I have never bent stainless steel but I have done plenty of conduit and mild steel exhaust pipe I will pick up some elbows for the bends. Thanks for the input

09-10-2021, 06:02 PM	#1
CWW Registered User Join Date: Mar 2021 Location: Goodrich ND Posts: 55	Stainless steel exhaust pipe How bad is it to bend 2" 18 guage stainless steel exhaust pipe?

09-11-2021, 07:57 AM	#4
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,885	Re: Stainless steel exhaust pipe I wouldn't do it, a 555 won't make tight enough bends. It would likely kink the pipe too. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

09-11-2021, 08:23 AM	#5
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,819	Re: Stainless steel exhaust pipe What degree of bend are you wanting? Is buying the elbows an option for your project? I tried the bending pipe thing. I packed it with sand and plugged the pipe tight. It worked for what I was doing. I don't think stainless would turn out looking Good ,..../////// __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

09-11-2021, 09:19 AM	#6
CWW Registered User Join Date: Mar 2021 Location: Goodrich ND Posts: 55	Re: Stainless steel exhaust pipe I would be going from the headers to the back of my 68 chevy stepper. I have never bent stainless steel but I have done plenty of conduit and mild steel exhaust pipe I will pick up some elbows for the bends. Thanks for the input



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.