exhaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slick '72 · 07-23-2016, 12:06 AM

i have a 350 with a mild cam. im looking for an exhaust with a good deep sound. any suggestions?

midniteblues · 07-23-2016, 12:57 AM

You can find a lot of sound clips of different mufflers on u tube.
Or take the time at local car shows too hear and ask what they are running.

A 350 only really needs 2 1/2" exhaust. Sure you could go bigger but it's only a benefit if your racing or chasing hp.

Try and find a decent local exhaust shop it's the best way too get it done if you can't do it yourself.
If your dropped/lowered you could have issues like going over the axle with a kit. They are built too fit a bone stock truck.
If you ask me they are expensive compared too a quality shop built exhaust with mandrel bends and not crimped bends and welded joints

Ask yourself do you want aluminized or ss there is a big price difference.

**Already Gone** · 07-23-2016, 01:26 AM

I have these exact mufflers on my truck. My truck is stock 1972 350/350 with the original ram horns. I had 2 1/4 inch pipes with duals installed along with a H pipe and ran the the exhaust out behind the rear wheels. Nice rumble at idle a little bark on acceleration with a slight rumble at highway speeds. Maybe you may want something louder.

http://www.dynomax.com/mufflers/ultr...elded-mufflers

Mrturner1 · 07-23-2016, 05:52 AM

Quote:

Originally Posted by Slick '72

i have a 350 with a mild cam. im looking for an exhaust with a good deep sound. any suggestions?

What cam?

07-23-2016, 12:06 AM	#1
Slick '72 Registered User Join Date: Jul 2016 Location: Jonesboro, Louisiana Posts: 4	exhaust i have a 350 with a mild cam. im looking for an exhaust with a good deep sound. any suggestions?

07-23-2016, 12:57 AM	#2
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: exhaust You can find a lot of sound clips of different mufflers on u tube. Or take the time at local car shows too hear and ask what they are running. A 350 only really needs 2 1/2" exhaust. Sure you could go bigger but it's only a benefit if your racing or chasing hp. Try and find a decent local exhaust shop it's the best way too get it done if you can't do it yourself. If your dropped/lowered you could have issues like going over the axle with a kit. They are built too fit a bone stock truck. If you ask me they are expensive compared too a quality shop built exhaust with mandrel bends and not crimped bends and welded joints Ask yourself do you want aluminized or ss there is a big price difference. __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.

07-23-2016, 01:26 AM	#3
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,080	Re: exhaust I have these exact mufflers on my truck. My truck is stock 1972 350/350 with the original ram horns. I had 2 1/4 inch pipes with duals installed along with a H pipe and ran the the exhaust out behind the rear wheels. Nice rumble at idle a little bark on acceleration with a slight rumble at highway speeds. Maybe you may want something louder. http://www.dynomax.com/mufflers/ultr...elded-mufflers Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.