MT WTB - these old school in-cab drink holders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 07-06-2014, 09:47 PM

Looking for a pair of these basket-type drink holders as shown in borrowed pic from Undertaker72. Would take whole set-up or just the metal baskets. Thanks, Pete

462loadtoad · 07-06-2014, 10:04 PM

http://www.sportsmansguide.com/produ...oozie?a=811673

http://www.easternmarine.com/wire-fo...chrome-11670-4

**DeadheadNM** · 07-06-2014, 10:07 PM

Quote:

Originally Posted by 462loadtoad

http://www.sportsmansguide.com/produ...oozie?a=811673

http://www.easternmarine.com/wire-fo...chrome-11670-4

Thanks! I'll use these as a back-up if no used patina'd pieces surface.

**too much stuff** · 07-06-2014, 10:28 PM

I had some here but will have to see if i can find them. Been awhile since i have seen them...

**leddzepp** · 07-06-2014, 10:41 PM

We used to have those in our boats. I believe they are called "bar buoys"

**thelonerife** · 07-06-2014, 10:56 PM

I was about to say they look like boat drink holders. Cool.

**special-K** · 07-07-2014, 08:11 AM

When I saw the title I just knew this would be about the Bar Bouys. I wondered when these would be brought back and it figures it would be Pete,with his keen sense of "era correct" to do it. We've seen the Hickey hysteria,the Eagle Venture hood hoopla,the gun rack rigmarole,and the camper/canopy/cap crap. They made a few failed attempts to come back,but Yosemite Sam flaps were a flop (go figure).
I used these for years up until I got to where I didn't want to be drilling holes. My camper had a few mounted around it. They are for boats,but the off road and RV guys out west started using them. Dick Cepek had them in his catalog. So many (CA/AZ) trucks I've bought have had the mounts or just the holes.

**undertaker72** · 07-07-2014, 08:28 AM

pete, sorry for the delays , been vacationing thru holiday , I don't have any spare baskets , I did find a link and I think they match your holder
http://www.ebay.com/itm/181130211661...%3AMEBIDX%3AIT

hope this helps , did you get the gmc home , are you going with highlander interior in it or have you rounded up a new one talk to you later kevin

**DeadheadNM** · 07-07-2014, 10:01 AM

Thanks guys. Kevin (undertaker72) pointed the mounts out to me on pics of a K1500 GMC I'm looking at (contemplating a Highlander redo of the interior). Since it already has the holes/mounts I figured why not make use of them. See mount under vent window on door pic below:

jondancer · 07-07-2014, 02:08 PM

Nice I really like those

**Ol Blue K20** · 07-07-2014, 04:44 PM

Quote:

Originally Posted by DeadheadNM

Thanks guys. Kevin (undertaker72) pointed the mounts out to me on pics of a K1500 GMC I'm looking at (contemplating a Highlander redo of the interior). Since it already has the holes/mounts I figured why not make use of them. See mount under vent window on door pic below:

Boy...that didn't stay under your hat long.....

**too much stuff** · 07-07-2014, 09:35 PM

Looks like mine are slightly different than yours.

**DeadheadNM** · 07-07-2014, 09:43 PM

Quote:

Originally Posted by Ol Blue K20

Boy...that didn't stay under your hat long.....

LOL! Not here yet though! PM sent re: the GB door...

Quote:

Originally Posted by too much stuff

Looks like mine are slightly different than yours.

Eric I'll take your cup holders

jondancer · 07-07-2014, 09:49 PM

Quote:

Originally Posted by too much stuff

Looks like mine are slightly different than yours.

I'd like to buy these if it gets to me!

**too much stuff** · 07-07-2014, 10:09 PM

Quote:

Originally Posted by DeadheadNM

LOL! Not here yet though! PM sent re: the GB door...

Eric I'll take your cup holders

You know those baskets won't fit your holders, correct?

**DeadheadNM** · 07-07-2014, 10:13 PM

No? That's killing me as those look cool. I can't be certain the bracket holes would match either.

**too much stuff** · 07-07-2014, 10:22 PM

Quote:

Originally Posted by DeadheadNM

No? That's killing me as those look cool. I can't be certain the bracket holes would match either.

I think yours accept a flat disc shape that slides in, where mine are more of a steel peg. Not sure what to say on the bracket holes...

**leddzepp** · 07-07-2014, 10:42 PM

The clips you have pictured are bar buoys. They are still in business: http://barbuoy.com. They sell a variety of holders now as well as the clips by themselves.

**undertaker72** · 07-07-2014, 11:07 PM

I think leddzep has a winner,, winner winner chicken diner , now maybe I can fill a couple voids also , worth a try

hopped up · 07-07-2014, 11:17 PM

These are cool!

**DeadheadNM** · 07-07-2014, 11:36 PM

Quote:

Originally Posted by too much stuff

I think yours accept a flat disc shape that slides in, where mine are more of a steel peg. Not sure what to say on the bracket holes...

Thanks for posting though Eric!

Quote:

Originally Posted by leddzepp

The clips you have pictured are bar buoys. They are still in business: http://barbuoy.com. They sell a variety of holders now as well as the clips by themselves.

Scott thanks - I'll track down a set.

Do these things work well? Not sure I'd like them well enough to drill the necessary holes but I can see how these would be handy. A set of these, a gun rack, a hat holder, a lighted Air Guide compass, and a CB and I'm set for the road

wreckedchevy · 07-08-2014, 01:13 AM

I know we've always had the metal barbuoy ones in all our boats and they work really well.

**RPOZ11** · 07-08-2014, 01:42 AM

Cool stuff

nobolt · 07-08-2014, 07:10 AM

hey Pete,
patina could be a problem....mine are over 40 years old and look fairly new.
they work good on the boat as long as I don't go very fast.

I wonder if they ever made them in brass?

**too much stuff** · 07-12-2014, 10:43 AM

Hat holder pics.

07-06-2014, 09:47 PM	#1
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,310	WTB - these old school in-cab drink holders Looking for a pair of these basket-type drink holders as shown in borrowed pic from Undertaker72. Would take whole set-up or just the metal baskets. Thanks, Pete Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-06-2014, 10:04 PM	#2
462loadtoad Registered User Join Date: Mar 2014 Location: San Antonio, TX Posts: 34	Re: WTB - these old school in-cab drink holders http://www.sportsmansguide.com/produ...oozie?a=811673 http://www.easternmarine.com/wire-fo...chrome-11670-4

07-06-2014, 10:28 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,714	Re: WTB - these old school in-cab drink holders I had some here but will have to see if i can find them. Been awhile since i have seen them... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-06-2014, 10:41 PM	#5
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,990	Re: WTB - these old school in-cab drink holders We used to have those in our boats. I believe they are called "bar buoys" __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

07-06-2014, 10:56 PM	#6
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: WTB - these old school in-cab drink holders I was about to say they look like boat drink holders. Cool. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

07-07-2014, 08:11 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: WTB - these old school in-cab drink holders When I saw the title I just knew this would be about the Bar Bouys. I wondered when these would be brought back and it figures it would be Pete,with his keen sense of "era correct" to do it. We've seen the Hickey hysteria,the Eagle Venture hood hoopla,the gun rack rigmarole,and the camper/canopy/cap crap. They made a few failed attempts to come back,but Yosemite Sam flaps were a flop (go figure). I used these for years up until I got to where I didn't want to be drilling holes. My camper had a few mounted around it. They are for boats,but the off road and RV guys out west started using them. Dick Cepek had them in his catalog. So many (CA/AZ) trucks I've bought have had the mounts or just the holes. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-07-2014, 08:28 AM	#8
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: WTB - these old school in-cab drink holders pete, sorry for the delays , been vacationing thru holiday , I don't have any spare baskets , I did find a link and I think they match your holder http://www.ebay.com/itm/181130211661...%3AMEBIDX%3AIT hope this helps , did you get the gmc home , are you going with highlander interior in it or have you rounded up a new one talk to you later kevin

07-07-2014, 10:01 AM	#9
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,310	Re: WTB - these old school in-cab drink holders Thanks guys. Kevin (undertaker72) pointed the mounts out to me on pics of a K1500 GMC I'm looking at (contemplating a Highlander redo of the interior). Since it already has the holes/mounts I figured why not make use of them. See mount under vent window on door pic below: Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-07-2014, 02:08 PM	#10
jondancer Registered User Join Date: Jul 2010 Location: central michigan Posts: 1,192	Re: WTB - these old school in-cab drink holders Nice I really like those

07-07-2014, 09:35 PM	#12
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,714	Re: WTB - these old school in-cab drink holders Looks like mine are slightly different than yours. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-07-2014, 10:13 PM	#16
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,310	Re: WTB - these old school in-cab drink holders No? That's killing me as those look cool. I can't be certain the bracket holes would match either. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-07-2014, 10:42 PM	#18
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,990	Re: WTB - these old school in-cab drink holders The clips you have pictured are bar buoys. They are still in business: http://barbuoy.com. They sell a variety of holders now as well as the clips by themselves. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

07-07-2014, 11:07 PM	#19
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: WTB - these old school in-cab drink holders I think leddzep has a winner,, winner winner chicken diner , now maybe I can fill a couple voids also , worth a try

07-07-2014, 11:17 PM	#20
hopped up Registered User Join Date: Jul 2010 Location: los angeles,ca Posts: 3,617	Re: WTB - these old school in-cab drink holders These are cool!

07-08-2014, 01:13 AM	#22
wreckedchevy Registered User Join Date: Jun 2013 Location: billings, mt Posts: 703	Re: WTB - these old school in-cab drink holders I know we've always had the metal barbuoy ones in all our boats and they work really well. __________________ 1969 Chevy C10 2wd stepside longbox



Register or Log In To remove these advertisements.

07-08-2014, 01:42 AM	#23
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: WTB - these old school in-cab drink holders Cool stuff __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

07-08-2014, 07:10 AM	#24
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: WTB - these old school in-cab drink holders hey Pete, patina could be a problem....mine are over 40 years old and look fairly new. they work good on the boat as long as I don't go very fast. I wonder if they ever made them in brass? __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

07-12-2014, 10:43 AM	#25
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,714	Re: WTB - these old school in-cab drink holders Hat holder pics. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Register or Log In To remove these advertisements.