The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-02-2015, 07:22 PM   #1
1972RedNeck
Registered User
 
1972RedNeck's Avatar
 
Join Date: Jan 2011
Location: Townsend MT
Posts: 1,725
GMC Park Light Pigtails/Harness

Anyone know where I can get the harness that goes from the core support to the park light for a '72 GMC? I just need one but can't seem to locate any.
__________________
1966 F250 4X4 416
1972 K20 350 4 OTF
Quote:
Originally Posted by GASoline71 View Post
I once pulled an intake manifold for a cam swap... ended up with a full on drag car that ran in the 11's.
1972RedNeck is offline   Reply With Quote
Old 06-02-2015, 08:30 PM   #2
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: GMC Park Light Pigtails/Harness

It is only four wires bonded togeter and easily bought and fabricated for the rear lights to work properly

the four wire harness is available at the local autoparts store by the foot or you can try a trailer supply store or a boat marine place

pigtails for the lights are hanging on the help section at the autp parts store too
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline   Reply With Quote
Old 10-08-2015, 09:24 PM   #3
1972RedNeck
Registered User
 
1972RedNeck's Avatar
 
Join Date: Jan 2011
Location: Townsend MT
Posts: 1,725
Re: GMC Park Light Pigtails/Harness

Quote:
Originally Posted by cdowns View Post
It is only four wires bonded togeter and easily bought and fabricated for the rear lights to work properly

the four wire harness is available at the local autoparts store by the foot or you can try a trailer supply store or a boat marine place

pigtails for the lights are hanging on the help section at the autp parts store too
No, I need one for the front. Two wires that plug into the plug on the core support and a bulb socket that snaps into the light housing on the other end.
__________________
1966 F250 4X4 416
1972 K20 350 4 OTF
Quote:
Originally Posted by GASoline71 View Post
I once pulled an intake manifold for a cam swap... ended up with a full on drag car that ran in the 11's.
1972RedNeck is offline   Reply With Quote
Old 10-22-2015, 11:25 PM   #4
1972RedNeck
Registered User
 
1972RedNeck's Avatar
 
Join Date: Jan 2011
Location: Townsend MT
Posts: 1,725
Re: GMC Park Light Pigtails/Harness

Bump?
__________________
1966 F250 4X4 416
1972 K20 350 4 OTF
Quote:
Originally Posted by GASoline71 View Post
I once pulled an intake manifold for a cam swap... ended up with a full on drag car that ran in the 11's.
1972RedNeck is offline   Reply With Quote
Old 10-23-2015, 06:22 AM   #5
farmallboy15
Registered User
 
Join Date: May 2014
Location: Lancaster, OH
Posts: 81
Re: GMC Park Light Pigtails/Harness

I've called and looked with no luck as well. You can get a new socket and pigtail at the auto parts store or repairconnector.com it isn't exactly the same but will work... or you can buy a used one on the parts board...
__________________

70 GMC K2500
82 GMC K3500
09 GMC 2500HD 4x4
farmallboy15 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:19 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com