Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-10-2019, 11:21 AM | #1 |
Registered User
Join Date: May 2019
Location: Brantford, Ontario
Posts: 3
|
'77 3/4 ton/ 1/2 ton parts interchange ??
New to the board so hopefully asking in the right place ...
I have a '77 3/4 ton long box chassis for use on a project. It has all the HD parts - 8-bolt wheels, duallie rear, etc.. I'd like to convert it to 5-bolt wheels. The rear end is a simple axle swap but what about the front end - can I just swap the rotors? Or what else needs to be swapped - rotors, caliper brackets, calipers, spindles ???? Thanks. |
06-10-2019, 11:54 AM | #2 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,061
|
Re: '77 3/4 ton/ 1/2 ton parts interchange ??
A-Arms, and pretty much all front end components are different. Probably th4e easiest way is to take the entire front cross member, unbolt from the 1/2 ton and put it in place of the 3/4 ton one.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
Bookmarks |
|
|