69 GMC truck power brake booster kit help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drsergio · 04-13-2011, 03:02 PM

So far so good

One disk brake done , one to go,,

Doing the power brake booster, got connected to the pedal so far

Will need a small air cleaner ( sugestions? )

Now I am looking where to conect the vacum hose from the kit

Here's the pictures on my engine

Thank you

PanelDeland · 04-13-2011, 04:43 PM

I ran mine to the plug shown with the "?" mark in the second photo.IIRC,I used hardware store fittings and 90* it out so I would have one smooth 90* curve in the hose.I have the smaller booster so I do have plenty of room for an aftermarket air filter.You will only be able touse a small one,though they did make an offset one that will work.Good luck finding one.

bsteele · 04-13-2011, 04:51 PM

I had an offset bottom for the air cleaner when we ran a 4 cyclinder race car for a friend. Can't remember where I got it from though. I was thinking it was like auto zone or something.

drsergio · 04-13-2011, 05:03 PM

So this will be my best way to connect my vacuum hose for the new power brake booster?

Looks like I ll be able to get a conection easy forthat

ty

**Steeveedee** · 10-04-2016, 09:56 PM

Quote:

Originally Posted by drsergio

So this will be my best way to connect my vacuum hose for the new power brake booster?

Looks like I ll be able to get a conection easy forthat

ty

Yes. You need a good vacuum signal that is not connected to the PCV system.

04-13-2011, 03:02 PM	#1
drsergio Registered User Join Date: Oct 2010 Location: danbury Posts: 70	69 GMC truck power brake booster kit help So far so good One disk brake done , one to go,, Doing the power brake booster, got connected to the pedal so far Will need a small air cleaner ( sugestions? ) Now I am looking where to conect the vacum hose from the kit Here's the pictures on my engine Thank you Attached Images

04-13-2011, 04:43 PM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: 69 GMC truck power brake booster kit help I ran mine to the plug shown with the "?" mark in the second photo.IIRC,I used hardware store fittings and 90* it out so I would have one smooth 90* curve in the hose.I have the smaller booster so I do have plenty of room for an aftermarket air filter.You will only be able touse a small one,though they did make an offset one that will work.Good luck finding one. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

04-13-2011, 04:51 PM	#3
bsteele Registered User Join Date: Feb 2009 Location: Kershaw, South Carolina Posts: 113	Re: 69 GMC truck power brake booster kit help I had an offset bottom for the air cleaner when we ran a 4 cyclinder race car for a friend. Can't remember where I got it from though. I was thinking it was like auto zone or something.

04-13-2011, 05:03 PM	#4
drsergio Registered User Join Date: Oct 2010 Location: danbury Posts: 70	Re: 69 GMC truck power brake booster kit help So this will be my best way to connect my vacuum hose for the new power brake booster? Looks like I ll be able to get a conection easy forthat ty Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.