The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-09-2020, 11:53 AM   #1
jwads
Registered User
 
Join Date: Nov 2018
Location: san diego, ca
Posts: 1
K10 LS Swap

Men,

I have a 1968 GMC K10. I want to do an LS swap on this bad boy. Is there anyone who makes an LS swap kit for 4x4's? I am only seeing 2wd stuff. Are there any differences between the 2?

Also - in terms of the swap, are there any differences between the chevy and GMC? Most kits are for chevrolet and dont mention GMC at all

Thank you!!
jwads is offline   Reply With Quote
Old 09-09-2020, 12:08 PM   #2
1971Stepside
Almost Satisfied
 
1971Stepside's Avatar
 
Join Date: Mar 2002
Location: Springfield, MO
Posts: 2,932
Re: K10 LS Swap

Welcome to the forum!! If you look in the LSx Swap under Engine and Drive-train section you will find all kinds of great information on what you are about to do. Good luck.
__________________
1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021.

"I can't complain, but sometimes I still do. Life's been good to me so far."
1971Stepside is offline   Reply With Quote
Old 09-09-2020, 12:22 PM   #3
57taskforce
All about them K’s
 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: Land of Entrapment
Posts: 6,439
Re: K10 LS Swap

Quote:
Originally Posted by jwads View Post
Men,

I have a 1968 GMC K10. I want to do an LS swap on this bad boy. Is there anyone who makes an LS swap kit for 4x4's? I am only seeing 2wd stuff. Are there any differences between the 2?

Also - in terms of the swap, are there any differences between the chevy and GMC? Most kits are for chevrolet and dont mention GMC at all

Thank you!!
As said the LS swap section is the place to look. There’s a bunch of 4x4 swap info over there. Chevy and GMC are the same with this swap.
__________________
Tyler
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s
57taskforce is online now   Reply With Quote
Old 09-09-2020, 01:26 PM   #4
gmc684x4
Registered User
 
Join Date: Jul 2012
Location: Whitehorse yukon
Posts: 1,218
Re: K10 LS Swap

You can buy the swap cross member kits 400 obo they require a lift kit

You can use a universal swap cross member from places like jegs around 60 bucks There aimed at 50s trucks

Or you can modify your motor mount cross member yourself

And yes there is lots of write up talk in the ls and 4x4 sections ls swap is under engine category
gmc684x4 is offline   Reply With Quote
Old 09-09-2020, 01:34 PM   #5
brazz04
Registered User
 
Join Date: Apr 2019
Location: Austin Texas
Posts: 6
Re: K10 LS Swap

I have been thinking the same about my 1972 K10. The best info comes from the build threads in my opinion. Search for 4x4 LS swap or 4x4 5.3. Here are a few that I have gained a ton of info from.

Creamsicle
http://67-72chevytrucks.com/vboard/s...d.php?t=782232

Crash's 69 K10
http://67-72chevytrucks.com/vboard/s...d.php?t=494599

And a 2wd here that he keeps to a very small budget Rusty C10
https://ls1tech.com/forums/conversio...71-c-10-a.html

One more 2wd but you get some great info and video from his build thread.
https://www.youtube.com/c/RustyWrenches/playlists

Here's a Jimmy 4x4 with NP205 build
http://67-72chevytrucks.com/vboard/s...d.php?t=663780

And Another 4x4 Jimmy
http://67-72chevytrucks.com/vboard/s...d.php?t=661982
brazz04 is offline   Reply With Quote
Old 09-09-2020, 03:43 PM   #6
57taskforce
All about them K’s
 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: Land of Entrapment
Posts: 6,439
Re: K10 LS Swap

I’m gonna go with the 55-59 v8 swap cross member in mine. $100 and no lift required. There’s a thread or two around about it.
__________________
Tyler
'57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888
'72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s
57taskforce is online now   Reply With Quote
Old 09-09-2020, 06:01 PM   #7
First c10
Registered User
 
First c10's Avatar
 
Join Date: Dec 2012
Location: Los Banos CA
Posts: 2,705
Re: K10 LS Swap

I used a 81-87 front cross member but if I had to do it again I would have just built it from scratch.
__________________
1956 Chevy Bel Air 2 door
1956 Chevy 210 4 Door
1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD
1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E
1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR *SOLD*
GO GO!!!
First c10 is offline   Reply With Quote
Old 09-09-2020, 08:55 PM   #8
derotoreut
Roto Reuter thats the name...
 
derotoreut's Avatar
 
Join Date: Feb 2010
Location: Darien, NY
Posts: 1,853
Re: K10 LS Swap

I just recently completed my first LS swap in my 70 K10. The sky is the limit on how far you can go. I used a Gen III LM7 with drive by cable. I put in a 5.3L 4L60E combo. I used the 4L60E because of the length and fit. This way I didn't have to modify my driveshafts. Nice thing about the Gen III (mine was 2000 Yukon) is that there is only one PCM and the drive by cable allowed me to use the stock pedal. Check out my build thread link in my signature and jump right in. Very nice swap and well worth it. Turn the key and go.
__________________
~ Dan
My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232
My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394

1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt
1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project

"Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977
derotoreut is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:18 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com