Tapped or soldered in rad connector? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dazza · 04-01-2016, 10:21 AM

Seems I have a leak at the lower radiator connection, just happy that I read a thread where someone mentioned using just water for break-in, so no coolant all over the place.

It doesn't look like the connector was soldered in and for some reason I remember somebody saying something about it being just tapped in. Should I pull it and solder? Tap it in? Pull it and take it in for repair?

**CUSTOM/10** · 04-01-2016, 10:27 AM

Any that I've worked on have been soldered. If you clean the paint off you should be able to see the solder.

Clean all the paint off with a wire brush & sandpaper, flux it and solder it.

Gary

04-01-2016, 10:21 AM	#1
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Tapped or soldered in rad connector? Seems I have a leak at the lower radiator connection, just happy that I read a thread where someone mentioned using just water for break-in, so no coolant all over the place. It doesn't look like the connector was soldered in and for some reason I remember somebody saying something about it being just tapped in. Should I pull it and solder? Tap it in? Pull it and take it in for repair? Attached Images __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----

04-01-2016, 10:27 AM	#2
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,801	Re: Tapped or soldered in rad connector? Any that I've worked on have been soldered. If you clean the paint off you should be able to see the solder. Clean all the paint off with a wire brush & sandpaper, flux it and solder it. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.