|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-15-2007, 11:09 PM
|
#1 |
|
Registered User
Join Date: Jul 2007
Location: NW, Georgia
Posts: 3
|
NOOB here in NW Georgia
Howdy just thought i would drop in here and say a few things. I've been lurking for about a month or so before joining while i was trying to find another project to work on. I decided on a truck and found a complete '63 swb stepside chevy that had been converted over to a GMC with a hood and a grill.
Suprisingly its in better shape than any other project i've started on from this time period, fenders are original with no rust at the bottoms...bottom bolt holes are still in great shape, doors are REALLY solid with only minor surface rust at the bottome, roof's great too. Really the only rot the truck has suffered is the passenger rocker panel is pretty much no longer there and you can stick your fist throught the cab corner on the same side. However the drivers side is nearly perfect with only a few pinholes in the cab floor near the kickpanel and the rocker. The bed is probably the best condition i've ever seen, minus the hack job someone did while replacing the wood floor with a metal one....welded 3" angle to the inner bedsides  Other than those things...its pretty much a barn find type truck. The guy recently sprayed the whole truck with flat black over the factory finish and its not a very good job. Almost forgot, the guy for some aweful reason decided that he didn't like the coil rear and swapped the whole frame for a '79 model and never finished it....basically the body is just laying on the frame with 2x4's. Lucky for me I had a buddy of mine give me a '64 frame thats had the front and rear replaced with '72 parts, all new steering, bearings, races, rotors, calipers....etc....the whole nine yards. Had to get rid of it because his neighbors were complaining about the junk outside. With the sheetmetal needed and some more odds and ends, im planning on it taking about $1500 to get this thing back on the road...it won't be pretty but it will be in good mechanical/structural shape. I found that i stay more interested in projects that i can drive while working on them. I'll get pictures asap, maybe i can give a little bit back to the forum over time. I've got some pretty good stuff from here so far. |
|
|
|
07-15-2007, 11:44 PM
|
#2 |
|
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
|
Re: NOOB here in NW Georgia
Welcome to the board from South Mississippi! Sounds like a good plan.D:
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal.  We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
|
|
|
|
07-15-2007, 11:56 PM
|
#3 |
|
Registered User
Join Date: Jan 2005
Location: AUCKLAND, NEW ZEALAND
Posts: 2,166
|
Re: NOOB here in NW Georgia
 to the board from New zealand
__________________
49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984 |
|
|
|
|
07-16-2007, 12:09 AM
|
#4 |
|
Born a Chevy Man
Join Date: Apr 2005
Location: Navarre, Florida
Posts: 10,221
|
Re: NOOB here in NW Georgia
Welcome from Western Kentucky.
__________________
John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 *1986 Chevy SWB Silverado *1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it)  CHEVY, American made w/pride!  If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER!  GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS |
|
|
|
|
07-16-2007, 12:30 AM
|
#5 |
|
Its always something!
Join Date: Aug 2005
Location: FT Worth,TX
Posts: 4,992
|
Re: NOOB here in NW Georgia
Welcome from FT Worth TX.
__________________
79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f*** short fleet 63 C 60 Flatbed  Member of the patina club |
|
|
|
|
07-16-2007, 01:45 AM
|
#6 |
|
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: NOOB here in NW Georgia
Welcome to the board from Texas
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
|
|
|
|
07-16-2007, 04:11 PM
|
#7 |
|
Registered User
Join Date: May 2007
Location: Crockett, Texas
Posts: 581
|
Re: NOOB here in NW Georgia
hi, welcome to the boards from east texas.
__________________
1967 chevy truck 350 V8 1973 VW Transporter/Hippy Bus 1964 VW Baja Bug "When the power of love overcomes the love of power the world will know peace"- Jimi Hendrix 
|
|
|
|
|
07-16-2007, 05:13 PM
|
#8 |
|
Truck Enthusiast
Join Date: Dec 2006
Location: Arlington, WA
Posts: 1,346
|
Re: NOOB here in NW Georgia
welcome from WA
__________________
'85 swb |
|
|
|
|
07-21-2007, 08:27 PM
|
#9 |
|
Born To Lose Club
 
Join Date: Feb 2003
Location: Calgary, Alberta/Oxenden, Ontario, Great White North
Posts: 13,306
|
Re: NOOB here in NW Georgia
Welcome To The Boards From The Great White North!
__________________
Brian Smith  - "Born To Lose"1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154. |
|
|
|
|
07-22-2007, 01:31 AM
|
#10 |
|
Registered User
Join Date: Aug 2006
Location: Bakersfield,CA
Posts: 7,893
|
Re: NOOB here in NW Georgia
WELCOME to the board
__________________
-steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME |
|
|
|
|
07-25-2007, 04:37 PM
|
#11 |
|
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,470
|
Re: NOOB here in NW Georgia
From West TN 
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
|
|
|
|
07-26-2007, 01:47 PM
|
#12 |
|
Licensed to Thrill!
Join Date: Apr 2006
Location: Northwest, GA
Posts: 1,673
|
Re: NOOB here in NW Georgia
I missed this...
Welcome to the board...from Northwest, GA. (Ringgold to be exact). DLB |
|
|
|
|
07-28-2007, 09:33 AM
|
#13 |
|
Registered User
Join Date: Jan 2004
Location: Coweta, Oklahoma
Posts: 2,389
|
Re: NOOB here in NW Georgia
Welcome from OK!
|
|
|
|
|
08-05-2007, 11:37 PM
|
#14 |
|
RIP Mr Ron
Join Date: Dec 2005
Location: Big Sandy, Tn. 38221
Posts: 8,166
|
Re: NOOB here in NW Georgia
Welcome to the board from West Tennessee.
__________________
Ron (Mr Round Tuit)  Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
