Looking for new clamshell hinge gaskets/seals - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LuckyScott · 01-09-2016, 10:49 PM

I thought they were reproduced, but I can't find them. I went to the Truck shop in Orange, and they usually have everything. Does anybody know where to buy them?
1972 clamshell upper hatch hinge rubber seals.

LuckyScott · 01-10-2016, 07:58 PM

I found ones for a blazer, are they the same?

Bigdav160 · 01-10-2016, 09:38 PM

Someone on here, recently, said they are not the same.

I bought Blazer ones also but haven't tried them.

LuckyScott · 01-11-2016, 12:05 PM

Thanks Big Dave!

**richard2717** · 01-15-2016, 08:53 AM

Looks like 14-15 & 16 of this page at GMC Pauls

http://www.gmcpauls.com/Suburban_-_Panel.htm

.

LuckyScott · 01-15-2016, 05:55 PM

Thats great! Thanks Richard. That looks like just what I need.

**richard2717** · 01-15-2016, 06:01 PM

No problem, I remembered seeing them when I was looking for seals for my Blazers & my panel. I kept the page bookmarked cause I knew I would never find it again.lol

Gobuffalo · 01-17-2016, 03:35 AM

I found everything in the Steel Rubber Products catalog.
The two in the outside upper hatch were the same as a blazer. Then the two that go in the body for the upper hinges ore the same as a barn door Suburban. The 4 holes in the body where the barn door hinges would go are a plug with an extra tail on it that's the bumper for the hatch or tail gate.
I can send p/n's tomorrow after I return from the Pomona Swap Meet. Anybody going?

LuckyScott · 01-17-2016, 06:23 PM

Yes, please send them. I was at Pomona all morning.

Gobuffalo · 01-18-2016, 12:19 PM

I found the following in a 2012 Steel Rubber Products catalog.

Hinge to hatch P/N 60-0736-69.
Hinge to body P/N 60-0659-69.
The plug / bumpers P/N 70-1795-71.

Some of the pieces come individually, some come in sets.
Hope this helps.

LuckyScott · 01-29-2016, 05:25 PM

Bought these from Steele, they seem perfect.
I found the following in a 2012 Steel Rubber Products catalog.

Hinge to hatch P/N 60-0736-69.

The plug / bumpers P/N 70-1795-71.

01-09-2016, 10:49 PM	#1
LuckyScott Registered User Join Date: Jun 2010 Location: Anaheim, Calif. Posts: 361	Looking for new clamshell hinge gaskets/seals I thought they were reproduced, but I can't find them. I went to the Truck shop in Orange, and they usually have everything. Does anybody know where to buy them? 1972 clamshell upper hatch hinge rubber seals.

01-10-2016, 07:58 PM	#2
LuckyScott Registered User Join Date: Jun 2010 Location: Anaheim, Calif. Posts: 361	Re: Looking for new clamshell hinge gaskets/seals I found ones for a blazer, are they the same?

01-10-2016, 09:38 PM	#3
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: Looking for new clamshell hinge gaskets/seals Someone on here, recently, said they are not the same. I bought Blazer ones also but haven't tried them. __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

01-11-2016, 12:05 PM	#4
LuckyScott Registered User Join Date: Jun 2010 Location: Anaheim, Calif. Posts: 361	Re: Looking for new clamshell hinge gaskets/seals Thanks Big Dave!

01-15-2016, 08:53 AM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,930	Re: Looking for new clamshell hinge gaskets/seals Looks like 14-15 & 16 of this page at GMC Pauls http://www.gmcpauls.com/Suburban_-_Panel.htm . __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-15-2016, 05:55 PM	#6
LuckyScott Registered User Join Date: Jun 2010 Location: Anaheim, Calif. Posts: 361	Re: Looking for new clamshell hinge gaskets/seals Thats great! Thanks Richard. That looks like just what I need.

01-15-2016, 06:01 PM	#7
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,930	Re: Looking for new clamshell hinge gaskets/seals No problem, I remembered seeing them when I was looking for seals for my Blazers & my panel. I kept the page bookmarked cause I knew I would never find it again.lol __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-17-2016, 03:35 AM	#8
Gobuffalo Registered User Join Date: Mar 2012 Location: Crestline, CA Posts: 225	Re: Looking for new clamshell hinge gaskets/seals I found everything in the Steel Rubber Products catalog. The two in the outside upper hatch were the same as a blazer. Then the two that go in the body for the upper hinges ore the same as a barn door Suburban. The 4 holes in the body where the barn door hinges would go are a plug with an extra tail on it that's the bumper for the hatch or tail gate. I can send p/n's tomorrow after I return from the Pomona Swap Meet. Anybody going?

01-17-2016, 06:23 PM	#9
LuckyScott Registered User Join Date: Jun 2010 Location: Anaheim, Calif. Posts: 361	Re: Looking for new clamshell hinge gaskets/seals Yes, please send them. I was at Pomona all morning.

01-18-2016, 12:19 PM	#10
Gobuffalo Registered User Join Date: Mar 2012 Location: Crestline, CA Posts: 225	Re: Looking for new clamshell hinge gaskets/seals I found the following in a 2012 Steel Rubber Products catalog. Hinge to hatch P/N 60-0736-69. Hinge to body P/N 60-0659-69. The plug / bumpers P/N 70-1795-71. Some of the pieces come individually, some come in sets. Hope this helps.

01-29-2016, 05:25 PM	#11
LuckyScott Registered User Join Date: Jun 2010 Location: Anaheim, Calif. Posts: 361	Re: Looking for new clamshell hinge gaskets/seals Bought these from Steele, they seem perfect. I found the following in a 2012 Steel Rubber Products catalog. Hinge to hatch P/N 60-0736-69. The plug / bumpers P/N 70-1795-71.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.