wtb 3/4 ton rear end - The 1947 - Present Chevrolet & GMC Truck Message Board Network

highboy_04 · 03-23-2004, 09:24 PM

i'm looking for something with better gears than my 4:11. maybe something in the 3:73 range. i'm not out pulling anything and i just wanna be able to drive on the highway. i would be willing to buy or trade someone for the rear i have or some other parts. Thanks, Steve

teeitup · 03-23-2004, 10:54 PM

I got some 3/4 rears Eatons, dana 60's and 14 bolts

Fred T · 03-23-2004, 10:56 PM

You'll find the 3.73 gears for your 10 bolt rear a pretty scarce item. Easiest way to get better gears for a 3/4 ton is to get a 12 or 14 bolt from a later model and swap the entire differential. 3.73 gears were standard for years, some of the newer ones have 3.42. Keep away from the vans, they are too wide for the pickups.

highboy_04 · 03-23-2004, 10:58 PM

thanks for the advise fred t. teeitup you wouldnt happen to have any of those 3.42 geared rear ends would you?

highboy_04 · 03-23-2004, 10:59 PM

oh by the way this is for a coil sprung rear end. sorry i forgot to put it in my first post. Thanks, Steve

teeitup · 03-23-2004, 11:33 PM

I'll try to look tomorrow.

highboy_04 · 03-23-2004, 11:34 PM

alright thanks alot.

**PICKMUP** · 03-24-2004, 12:28 AM

You want to be looking for the 3:54 dana60 that was offered only in our BB trucks. The coil rear is hard to find, in 3/4T trucks. It is easier to find in 2wd BB Suburbans, because they are ALL coil rearends.
I have shipped several out of here, and that wasn't cheap, but guys wanted them that bad.

teeitup · 03-24-2004, 08:50 PM

All I have left are for leaf springs but you could change mounting pads. Thanks Randy

03-23-2004, 09:24 PM	#1
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	wtb 3/4 ton rear end i'm looking for something with better gears than my 4:11. maybe something in the 3:73 range. i'm not out pulling anything and i just wanna be able to drive on the highway. i would be willing to buy or trade someone for the rear i have or some other parts. Thanks, Steve __________________ '67 c10 350/th350

03-23-2004, 10:54 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I got some 3/4 rears Eatons, dana 60's and 14 bolts __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-23-2004, 10:56 PM	#3
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	You'll find the 3.73 gears for your 10 bolt rear a pretty scarce item. Easiest way to get better gears for a 3/4 ton is to get a 12 or 14 bolt from a later model and swap the entire differential. 3.73 gears were standard for years, some of the newer ones have 3.42. Keep away from the vans, they are too wide for the pickups. __________________ Fred There is no such thing as too much cam...just not enough engine.

03-23-2004, 10:58 PM	#4
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	thanks for the advise fred t. teeitup you wouldnt happen to have any of those 3.42 geared rear ends would you? __________________ '67 c10 350/th350

03-23-2004, 10:59 PM	#5
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	oh by the way this is for a coil sprung rear end. sorry i forgot to put it in my first post. Thanks, Steve __________________ '67 c10 350/th350

03-23-2004, 11:33 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I'll try to look tomorrow. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-23-2004, 11:34 PM	#7
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	alright thanks alot. __________________ '67 c10 350/th350

03-24-2004, 12:28 AM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,122	You want to be looking for the 3:54 dana60 that was offered only in our BB trucks. The coil rear is hard to find, in 3/4T trucks. It is easier to find in 2wd BB Suburbans, because they are ALL coil rearends. I have shipped several out of here, and that wasn't cheap, but guys wanted them that bad. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

03-24-2004, 08:50 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	All I have left are for leaf springs but you could change mounting pads. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.