Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-09-2013, 01:45 PM | #1 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,896
|
How To Restore and Detail an Original Gauge Cluster
After restoring a couple gauge clusters I had a request for a "how-to" post to show the process and products I use. The cluster I'll be restoring is from a '66 parts truck, and I'll be adding a tach and air gauge. The block off plates are missing, which is okay since they'll be replaced by the tach/air gauges.
This is the starting point. The lens will need to be replaced since it's scratched and the lettering is faded, and one of the harness wires is cut. I took these pictures to have a reference for reassembly. This way I know that all of the wiring goes back exactly where it should without guessing. This is one of my finished clusters.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
Bookmarks |
|
|