The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > S10 S15 Luv Blazer

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-13-2011, 12:33 AM   #1
gchemist
BAD BOW-Silverado XST
 
gchemist's Avatar
 
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
Code P0134

My Jimmy has an intermediate P0134 code. If I leave it alone, the light turns off. All four O2 sensors are new. I'm going to move the reat cat O2 sensor to the Bank 1 Sensor 1 location.

Potential Symptoms
One or more of the following may occur:

Check engine light illumination
Poorly running/engine missing
Blowing black smoke
Poor fuel economy
Dying, stuttering

Causes for code P0134 may mean that one or more of the following has happened:

Bad O2 (oxygen) sensor
Bad heater circuit in the O2 sensor
Wiring or connector to the sensor frayed / broken
Blown heater circuit fuse
Holes in the exhaust system
PCM failure

Has anyone had this problem? I wonder if low fuel pressure can cause this code?
__________________
Gerardo a.k.a. Mad Chemist
Silverado XST videos
gchemist is offline   Reply With Quote
Old 07-18-2011, 01:24 AM   #2
gchemist
BAD BOW-Silverado XST
 
gchemist's Avatar
 
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
Re: Code P0134

I guess it's a bad sensor. I moved rear cat O2 sensor to the Bank 1 Sensor 1 location. After four days of driving no codes. The 4.3 seems a little peppy too. I guess the sensor is just bad. The rear cat O2 sensor is not heated so I doubt any codes will appear for it. If they do, I'll send it back for a replacement.
__________________
Gerardo a.k.a. Mad Chemist
Silverado XST videos
gchemist is offline   Reply With Quote
Old 07-18-2011, 08:57 PM   #3
mbgmike
Registered User
 
Join Date: Aug 2005
Location: Pasadena,Tx /Pto Pta DR
Posts: 5,415
Re: Code P0134

thats a fairly common code, glad you fixed it sounds like. i like to use sensors from NAPA or NKG .Some sensors are fickle in some vehicles.
mbgmike is offline   Reply With Quote
Old 07-19-2011, 02:45 AM   #4
gchemist
BAD BOW-Silverado XST
 
gchemist's Avatar
 
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
Re: Code P0134

The sensors are from NTK (NGK). All four are new. They have a few thousand miles on them. I was worried they would post codes with a Magnaflow cat and muffler. So they far they work great. The best improvement is highway driving. I noticed the difference right away. It picked milage above 20 mpg. I need to take it on a long run. I think it could hit 23 MPG.
__________________
Gerardo a.k.a. Mad Chemist
Silverado XST videos
gchemist is offline   Reply With Quote
Old 07-25-2011, 01:29 AM   #5
Bus Ted Knuckle
Son of a gun
 
Bus Ted Knuckle's Avatar
 
Join Date: Jan 2007
Location: Hot Springs, Arkansas
Posts: 1,636
Re: Code P0134

you have to be careful when you install those sensors too, they can get cracked and go bad fast.
__________________
Bill

BEATERS ARE NEATER
Bus Ted Knuckle is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com