Need pic of alt. brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

My Boy's Toy · 01-19-2003, 05:31 PM

I need a pic of the correct alt brackets for a 327 With camel hump heads , no acc. holes . I'm running Rams horns with holes on the end . Thank's for any help .

matt_field · 01-19-2003, 10:15 PM

well what i got out of it, im running the same exact thing as you only on a 383, looks just like a 327 tho, you can buy
"F" bracket out of jegs or your local store, and then there is the long adjust bar, and that comes off of your waterpump i think.. and the "f" bracket bolts to your ram horn. hope i helped its kinda hard to explain..

matt

toms68cst · 01-20-2003, 09:57 AM

I don't have camel hump heads but I do have a stock 68 327 with ram horn manifolds. The DS ram horn does have the acc mounting holes. Everything's out of the truck so I could snap some pictures if that would help.

JimKshortstep4x4 · 01-20-2003, 02:42 PM

Here is a pic of the brackets from one angle. Need to take a
picture with the engine out. Sorry, it is all that I have.

Jim

My Boy's Toy · 01-20-2003, 06:59 PM

Thanks Jim , that at least shows me witch top bracket I need , Tom If you could take a pick that would help. Thanks Guy's

01-19-2003, 05:31 PM	#1
My Boy's Toy Registered User Join Date: Dec 2001 Location: West Unity, OH, USA Posts: 235	Need pic of alt. brackets I need a pic of the correct alt brackets for a 327 With camel hump heads , no acc. holes . I'm running Rams horns with holes on the end . Thank's for any help .

01-19-2003, 10:15 PM	#2
matt_field Registered User Join Date: Apr 2001 Location: Detroit Lakes, Minnesota Posts: 885	well what i got out of it, im running the same exact thing as you only on a 383, looks just like a 327 tho, you can buy "F" bracket out of jegs or your local store, and then there is the long adjust bar, and that comes off of your waterpump i think.. and the "f" bracket bolts to your ram horn. hope i helped its kinda hard to explain.. matt __________________ 1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles

01-20-2003, 09:57 AM	#3
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,278	I don't have camel hump heads but I do have a stock 68 327 with ram horn manifolds. The DS ram horn does have the acc mounting holes. Everything's out of the truck so I could snap some pictures if that would help. __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

01-20-2003, 02:42 PM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Here is a pic of the brackets from one angle. Need to take a picture with the engine out. Sorry, it is all that I have. Jim Attached Images

01-20-2003, 06:59 PM	#5
My Boy's Toy Registered User Join Date: Dec 2001 Location: West Unity, OH, USA Posts: 235	Thanks Jim , that at least shows me witch top bracket I need , Tom If you could take a pick that would help. Thanks Guy's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.