how do I make it a big block? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RED72blazer · 12-09-2002, 06:36 PM

How do I put a big block in a 72 blazer?

*Randy70C-10* · 12-09-2002, 06:39 PM

You need some big block towers. Desert Rat probably has some.

da-burb · 12-09-2002, 09:25 PM

And don't forget the 3" body lift and the firewall modification with a BFH.

crazy longhorn · 12-09-2002, 09:28 PM

BFH......that a pretty big hammer

Bowed · 12-09-2002, 09:36 PM

I did a related reply on BB install last week , search my posts for ( crazy engine mount questions ) .

**BIG ORANGE** · 12-09-2002, 09:39 PM

You need to buy my 402 BB and the BB towers I have

RED72blazer · 12-10-2002, 06:34 PM

do I really need a three inch body lift?

12-09-2002, 06:36 PM	#1
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	how do I make it a big block? How do I put a big block in a 72 blazer? __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

12-09-2002, 09:25 PM	#3
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	And don't forget the 3" body lift and the firewall modification with a BFH. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

12-09-2002, 09:28 PM	#4
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	BFH......that a pretty big hammer __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

12-09-2002, 09:36 PM	#5
Bowed Registered User Join Date: Oct 2002 Location: where it's hot Posts: 1,059	I did a related reply on BB install last week , search my posts for ( crazy engine mount questions ) . Last edited by Bowed; 12-09-2002 at 09:40 PM.

12-09-2002, 09:39 PM	#6
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,747	You need to buy my 402 BB and the BB towers I have __________________ Things happen for a reason!

12-09-2002, 06:39 PM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	You need some big block towers. Desert Rat probably has some.

12-10-2002, 06:34 PM	#7
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	do I really need a three inch body lift? __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.



Register or Log In To remove these advertisements.