Looking for all four exterior fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 09-12-2003, 12:02 AM

Hey guys, just testing the water yet agian to see if I can find some fenders to replace the four rotted / dented ones on my truck... I would prefer something fairly local (somewhere in Alberta)

I want to go with a clean trimless look, but my wheel wells are rotted out and I'm not sure if I can rebuild them... I wanna see if real fenders are cheaper than patch panels...

ElGracho · 09-12-2003, 12:53 AM

New 73-80 GM fenders are $230 list each down here. Not really that much considering how much you would pay to get a wrecking yard set stripped and take the dings out of them.

Russell · 09-12-2003, 09:38 AM

Hmm -- I was hoping to find all four for around 500 tops... I'm working on a reallly limited budget

Paulgs71 · 09-13-2003, 01:08 AM

Russell,
I might be able to get them for you if you can meet me on I-94 (Montana) $500. No more no less. No money up front but you would definitely need to be firm that you can do this?!?!

Paul71gs@msn.com

Russell · 09-13-2003, 10:19 AM

Unfortunately, that would be around a 12 hour drive at over 60 miles an hour... I am from Alberta Canada, otherwise I would definitly take you up on your offer. I would do the drive, but the vehicle I am able to drive right now is needed daily by my father.

09-12-2003, 12:02 AM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Looking for all four exterior fenders Hey guys, just testing the water yet agian to see if I can find some fenders to replace the four rotted / dented ones on my truck... I would prefer something fairly local (somewhere in Alberta) I want to go with a clean trimless look, but my wheel wells are rotted out and I'm not sure if I can rebuild them... I wanna see if real fenders are cheaper than patch panels... __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

09-12-2003, 12:53 AM	#2
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,550	New 73-80 GM fenders are $230 list each down here. Not really that much considering how much you would pay to get a wrecking yard set stripped and take the dings out of them. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

09-12-2003, 09:38 AM	#3
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Hmm -- I was hoping to find all four for around 500 tops... I'm working on a reallly limited budget __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

09-13-2003, 01:08 AM	#4
Paulgs71 Registered User Join Date: Apr 2003 Posts: 59	2 front fenders 2 full quarters Rustfree Russell, I might be able to get them for you if you can meet me on I-94 (Montana) $500. No more no less. No money up front but you would definitely need to be firm that you can do this?!?! Paul71gs@msn.com

09-13-2003, 10:19 AM	#5
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Unfortunately, that would be around a 12 hour drive at over 60 miles an hour... I am from Alberta Canada, otherwise I would definitly take you up on your offer. I would do the drive, but the vehicle I am able to drive right now is needed daily by my father. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.