TRADE Step Fender, Olympia WA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WinDancer · 01-22-2008, 12:52 PM

I have a real nice standard drivers side fender [stepside] that I would like to trade for a drivers side fender with the tire mount.
Please respond here so I don't get lost

72Levi · 01-23-2008, 12:38 AM

I can do the swap, I have a real nice driver side fender with tire mount and need one without. How would we do shipping I live in Texas? Via Greyhound bus? FedEx? UPS? Cost any ideas? Thanks

WinDancer · 01-23-2008, 03:52 AM

We could probably buy new ones for the shipping cost

There was talk a while back about a board thread for folks traveling that would be willing to carry stuff around... let me see if that is still going on.

LooseScrews · 01-23-2008, 04:37 AM

I know Gray Ghost was lookin' to trade a spare fender for a non-spare, but he's in Texas, too.

**PICKMUP** · 01-23-2008, 06:47 AM

Dave,
I have a perfect one with NO rust or damage. Even the inside mounting flange is solid, as are the front & rear bottom corners...no tire mount. I would trade for solid lh fender in same condition...bring tools to remove.
Frank

bean · 01-23-2008, 07:48 AM

i have a pasenger side fender that is straight except for where the marker light is. I'd be willing to practically to give it away.

WinDancer · 01-23-2008, 10:59 AM

I posted a note in the transportation section, will wait a day or so for a response.

Mine is in good condition with a few marks here and there, some light surface rust, will require very little mud before painting. No real rust or real dents anywhere. I will get a couple pics tomorrow and post them here.

A fender in comparable condition would thrill me.

Frank, mine is not ready for paint but very close. Still hoping to find one with all the spare mounting hardware. If I don't find one within a week or so I will give you a buzz. I enjoyed meeting you at the gathering Sunday

WinDancer · 01-28-2008, 04:05 AM

ttt

**Classic Heartbeat** · 01-28-2008, 04:44 AM

I have a stepside fender tire mount in exelent condition... I will try to remember who has a fender. WES

WinDancer · 02-01-2008, 02:14 PM

Last Try..........

toomanytoyz · 02-02-2008, 12:18 AM

I Had 2 Step Fenders Shipped from AZ to In. using DHL & it Came to $ 75.00 for Both, Mine has the Spare Tire Mount, Try Posting a Pic of Your's & I will post Pics of Mine. Maybe we can Work out a Trade, You Pay for your's to Ship & I will Pay for Mine............

Sound Reasonable to You???

Rick

72swbcamo · 02-02-2008, 02:16 AM

Classic Heartbeat I am interested in the side mount tire bracket i it is or sale. PM me with the cost and shipping to 06705. Thanks

**Classic Heartbeat** · 02-02-2008, 09:37 AM

72swbcamo, got your PM sent you pictures. WES

502tripower · 02-02-2008, 11:54 AM

Quote:

Originally Posted by PICKMUP

Dave,
I have a perfect one with NO rust or damage. Even the inside mounting flange is solid, as are the front & rear bottom corners...no tire mount. I would trade for solid lh fender in same condition...bring tools to remove.
Frank

Frank, You have a PM

WinDancer · 02-02-2008, 12:19 PM

toomanytoyz
I will get some pics tomorrow and get them posted. Does your fender include the mounting stuff for the spare?

WinDancer · 02-03-2008, 02:46 PM

After thinking about it some more, I am just gonna keep my fender and leave the tire in the bed under a new tonneau cover.
Thanks

toomanytoyz · 02-03-2008, 03:20 PM

Quote:

Originally Posted by WinDancer

After thinking about it some more, I am just gonna keep my fender and leave the tire in the bed under a new tonneau cover.
Thanks

Probably a Wise Decision, If Mine were on a Operable Truck i would'nt mess with it Either................

Rick

01-22-2008, 12:52 PM	#1
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	TRADE Step Fender, Olympia WA I have a real nice standard drivers side fender [stepside] that I would like to trade for a drivers side fender with the tire mount. Please respond here so I don't get lost __________________ Dave 69 GMC SWB 2WD 454 Turbo 400 Last edited by WinDancer; 01-22-2008 at 12:53 PM.

01-23-2008, 12:38 AM	#2
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Re: TRADE Step Fender, Olympia WA I can do the swap, I have a real nice driver side fender with tire mount and need one without. How would we do shipping I live in Texas? Via Greyhound bus? FedEx? UPS? Cost any ideas? Thanks __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it!

01-23-2008, 03:52 AM	#3
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: TRADE Step Fender, Olympia WA We could probably buy new ones for the shipping cost There was talk a while back about a board thread for folks traveling that would be willing to carry stuff around... let me see if that is still going on. __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

01-23-2008, 04:37 AM	#4
LooseScrews Transplanted Dixie chick!! Join Date: Jan 2007 Location: Central Alabama Posts: 330	Re: TRADE Step Fender, Olympia WA I know Gray Ghost was lookin' to trade a spare fender for a non-spare, but he's in Texas, too. __________________ To be old and wise, you must first be young and stupid!!

01-23-2008, 06:47 AM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,122	Re: TRADE Step Fender, Olympia WA Dave, I have a perfect one with NO rust or damage. Even the inside mounting flange is solid, as are the front & rear bottom corners...no tire mount. I would trade for solid lh fender in same condition...bring tools to remove. Frank

01-23-2008, 07:48 AM	#6
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 915	Re: TRADE Step Fender, Olympia WA i have a pasenger side fender that is straight except for where the marker light is. I'd be willing to practically to give it away.

01-23-2008, 10:59 AM	#7
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: TRADE Step Fender, Olympia WA I posted a note in the transportation section, will wait a day or so for a response. Mine is in good condition with a few marks here and there, some light surface rust, will require very little mud before painting. No real rust or real dents anywhere. I will get a couple pics tomorrow and post them here. A fender in comparable condition would thrill me. Frank, mine is not ready for paint but very close. Still hoping to find one with all the spare mounting hardware. If I don't find one within a week or so I will give you a buzz. I enjoyed meeting you at the gathering Sunday __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

01-28-2008, 04:05 AM	#8
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: TRADE Step Fender, Olympia WA ttt __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

01-28-2008, 04:44 AM	#9
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: TRADE Step Fender, Olympia WA I have a stepside fender tire mount in exelent condition... I will try to remember who has a fender. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

02-01-2008, 02:14 PM	#10
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: TRADE Step Fender, Olympia WA Last Try.......... __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

02-02-2008, 12:18 AM	#11
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: TRADE Step Fender, Olympia WA I Had 2 Step Fenders Shipped from AZ to In. using DHL & it Came to $ 75.00 for Both, Mine has the Spare Tire Mount, Try Posting a Pic of Your's & I will post Pics of Mine. Maybe we can Work out a Trade, You Pay for your's to Ship & I will Pay for Mine............ Sound Reasonable to You??? Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

02-02-2008, 02:16 AM	#12
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Re: TRADE Step Fender, Olympia WA Classic Heartbeat I am interested in the side mount tire bracket i it is or sale. PM me with the cost and shipping to 06705. Thanks

02-02-2008, 09:37 AM	#13
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: TRADE Step Fender, Olympia WA 72swbcamo, got your PM sent you pictures. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

02-02-2008, 12:19 PM	#15
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: TRADE Step Fender, Olympia WA toomanytoyz I will get some pics tomorrow and get them posted. Does your fender include the mounting stuff for the spare? __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

02-03-2008, 02:46 PM	#16
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: TRADE Step Fender, Olympia WA After thinking about it some more, I am just gonna keep my fender and leave the tire in the bed under a new tonneau cover. Thanks __________________ Dave 69 GMC SWB 2WD 454 Turbo 400



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.