3 core chrome radiator retainers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

avysittinon22s · 06-01-2009, 06:39 PM

These are used but never installed since chromed. Has new upper pads.

$50

avysittinon22s · 06-03-2009, 08:16 PM

bump

1968SWBBigBlock · 06-03-2009, 10:06 PM

can you send me the dimensions on these
Looking for overall length & length from the turndown on the rubber to the back

avysittinon22s · 06-05-2009, 09:12 PM

ill get some and post tomorrow, they are at the house. Are you wanting to fit an aluminum radiator?

1968SWBBigBlock · 06-06-2009, 06:37 PM

no stock radiator

avysittinon22s · 06-07-2009, 11:59 AM

appro. 2.75 from inside to inside on the rubber. hope this helps

avysittinon22s · 06-09-2009, 09:04 PM

bump

1968SWBBigBlock · 06-09-2009, 09:44 PM

sorry these will not fit - mine is 4" ID

avysittinon22s · 06-11-2009, 07:51 PM

bump

avysittinon22s · 06-14-2009, 11:59 AM

ttt

06-01-2009, 06:39 PM	#1
avysittinon22s Registered User Join Date: Jun 2006 Location: Paris, TN Posts: 376	3 core chrome radiator retainers These are used but never installed since chromed. Has new upper pads. $50 Attached Images

06-03-2009, 08:16 PM	#2
avysittinon22s Registered User Join Date: Jun 2006 Location: Paris, TN Posts: 376	Re: 3 core chrome radiator retainers bump

06-03-2009, 10:06 PM	#3
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: 3 core chrome radiator retainers can you send me the dimensions on these Looking for overall length & length from the turndown on the rubber to the back __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

06-05-2009, 09:12 PM	#4
avysittinon22s Registered User Join Date: Jun 2006 Location: Paris, TN Posts: 376	Re: 3 core chrome radiator retainers ill get some and post tomorrow, they are at the house. Are you wanting to fit an aluminum radiator?

06-06-2009, 06:37 PM	#5
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: 3 core chrome radiator retainers no stock radiator __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

06-07-2009, 11:59 AM	#6
avysittinon22s Registered User Join Date: Jun 2006 Location: Paris, TN Posts: 376	Re: 3 core chrome radiator retainers appro. 2.75 from inside to inside on the rubber. hope this helps

06-09-2009, 09:04 PM	#7
avysittinon22s Registered User Join Date: Jun 2006 Location: Paris, TN Posts: 376	Re: 3 core chrome radiator retainers bump

06-09-2009, 09:44 PM	#8
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: 3 core chrome radiator retainers sorry these will not fit - mine is 4" ID __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

06-11-2009, 07:51 PM	#9
avysittinon22s Registered User Join Date: Jun 2006 Location: Paris, TN Posts: 376	Re: 3 core chrome radiator retainers bump

06-14-2009, 11:59 AM	#10
avysittinon22s Registered User Join Date: Jun 2006 Location: Paris, TN Posts: 376	Re: 3 core chrome radiator retainers ttt



Register or Log In To remove these advertisements.