383 short block CHEAP! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHEVYE · 04-14-2004, 07:10 PM

i have it listed on ebay for a ridiculous price now. item # 2473180370

LUV2XCLR8 · 04-14-2004, 07:14 PM

NEED CASH? OR ARE TRADES CONSIDERED? WHAT DO YOU NEED?

CHEVYE · 04-14-2004, 07:26 PM

trades are welcome as long as someone doesn`t bid or buy it. i`ve had 50 ?`s sent to me and offers to buy it now on ebay but you know how that goes. pistons and rods bare are worth that starting price. i guess the market is small for engines. pm me with what you might have in mind.

67ChevyC10Stepside · 04-14-2004, 10:24 PM

what would you want in trade?

CHEVYE · 04-14-2004, 11:05 PM

motorcycle, 4 wheeler, guns, old car or truck. i don`t really know to be honest i guess something i like. that really doesn`t explain it (sorry). you know what i mean though.

LUV2XCLR8 · 04-14-2004, 11:18 PM

I THOUGHT ABOUT MY 70 MODEL TRUCK THAT I TRIED TO SELL
FOR $1200, THEN $1000, THEN $800 O.B.O., NOW $600 O.B.O.
BUT IT MAY NOT BE A GOOD ENOUGH DEAL, SOUNDS LIKE YOU
HAVE ALOT OF MONEY IN THAT SHORT BLOCK. CAN'T COMPETE.

highboy_04 · 04-15-2004, 01:37 AM

what kinda old car or truck are you looking for?

CHEVYE · 04-15-2004, 01:48 PM

i like a lot of them i`m not really partial to any which one (except 67-72 trucks) of course . depends what you have.

highboy_04 · 04-15-2004, 08:49 PM

i got a chevy beretta. its not really old.... its an '89. it needs a motor though.

CHEVYE · 04-15-2004, 09:01 PM

sorry no need for that. would take old 60`s 70`s car with no motor. i have another extra motor i took the heads off this one for and a fresh tranny ready to go.

highboy_04 · 04-15-2004, 10:28 PM

i have a '76 gmc truck with no motor or tranny. its in pretty decent shape.

LUV2XCLR8 · 04-15-2004, 10:42 PM

MY 70 C-10 HAS A 350 TURBO WITH A SHIFT KIT AND A MANUAL
VALVE BODY, 12 BOLT REAR END, AND 4:10 GEARS. ( 250 I6 IS
WORE OUT AND READY FOR A V-8 TRANSPLANT ) BODY NEADS
WORK OF COURSE AND MANY PANELS NEED REPLACING. ALSO
HAS 90 MODEL SILVERADO SEAT AND 15X8 4WD RALLY WHEELS
ALSO EVERYTHING TO SWAP IT OVER 2 5 LUG DISC BRAKES TOO.

CHEVYE · 04-15-2004, 11:24 PM

i was looking for a truck a couple of months ago and found one with a big block and air for cheap. i just bought a new 4 wheeler last week. i think if i bring anything else home my woman is going to strangle me. what i would really like to swap it for is a nice set of wheels or some big block parts for my truck. but i doubt anyone has anything like that laying around.

highboy_04 · 04-15-2004, 11:31 PM

what kinda bb parts?

CHEVYE · 04-15-2004, 11:37 PM

i`ll be needing an edelbrock intake, 750 or so carb, and aluminum dress up stuff (valve covers etc.)

highboy_04 · 04-15-2004, 11:38 PM

can you post me a link to the ebay auction? i havent seen any pics of the motor

CHEVYE · 04-15-2004, 11:42 PM

i can pull off a lot of stuff on a car but i won`t b.s on a cpu i am almost cpu illiterate. i don`t really know how to do a fancy link on there. i have a hard time shrinking pics to post them...lol...

CHEVYE · 04-15-2004, 11:43 PM

i leave work in 10 minutes and when i get home i will post a pic here on the board.

highboy_04 · 04-15-2004, 11:45 PM

is the motor all assembled and running or is it in pieces?

71swb4x4 · 04-15-2004, 11:48 PM

Here is a link, Highboy - all you have to do is type the number in the Ebay search window, like you would type engine if you were looking for an engine, hope that helps you in the future

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2473180370

CHEVYE · 04-15-2004, 11:49 PM

check out the item # on ebay. it`s all there in a rotating assembly. i keep it oiled and in a bag. i rotate it by hand every now and then so it doesn`t seize up any. it will be a runner when it is done. he put all the big money parts in it.

67ChevyC10Stepside · 04-16-2004, 12:09 AM

man i wish i could think of something worth 650....

highboy_04 · 04-16-2004, 12:35 AM

i've got an aluminum bb intake and stuff but i need a motor that runs already. i dont have time to put it all together

67ChevyC10Stepside · 04-16-2004, 01:57 AM

wth are you talking about? the BB aint for sale...the SB is...

highboy_04 · 04-16-2004, 01:58 AM

yeah but he wants bb parts..... for trade

04-14-2004, 07:10 PM	#1
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	383 short block CHEAP! i have it listed on ebay for a ridiculous price now. item # 2473180370

04-14-2004, 07:14 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	NEED CASH? OR ARE TRADES CONSIDERED? WHAT DO YOU NEED? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

04-14-2004, 11:18 PM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	I THOUGHT ABOUT MY 70 MODEL TRUCK THAT I TRIED TO SELL FOR $1200, THEN $1000, THEN $800 O.B.O., NOW $600 O.B.O. BUT IT MAY NOT BE A GOOD ENOUGH DEAL, SOUNDS LIKE YOU HAVE ALOT OF MONEY IN THAT SHORT BLOCK. CAN'T COMPETE. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

04-15-2004, 01:37 AM	#7
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	what kinda old car or truck are you looking for? __________________ '67 c10 350/th350

04-15-2004, 08:49 PM	#9
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	i got a chevy beretta. its not really old.... its an '89. it needs a motor though. __________________ '67 c10 350/th350

04-14-2004, 07:26 PM	#3
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	trades are welcome as long as someone doesn`t bid or buy it. i`ve had 50 ?`s sent to me and offers to buy it now on ebay but you know how that goes. pistons and rods bare are worth that starting price. i guess the market is small for engines. pm me with what you might have in mind.

04-14-2004, 10:24 PM	#4
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	what would you want in trade?

04-14-2004, 11:05 PM	#5
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	motorcycle, 4 wheeler, guns, old car or truck. i don`t really know to be honest i guess something i like. that really doesn`t explain it (sorry). you know what i mean though.

04-15-2004, 01:48 PM	#8
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	i like a lot of them i`m not really partial to any which one (except 67-72 trucks) of course . depends what you have.

04-15-2004, 09:01 PM	#10
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	sorry no need for that. would take old 60`s 70`s car with no motor. i have another extra motor i took the heads off this one for and a fresh tranny ready to go.

04-15-2004, 10:28 PM	#11
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	i have a '76 gmc truck with no motor or tranny. its in pretty decent shape. __________________ '67 c10 350/th350

04-15-2004, 10:42 PM	#12
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	MY 70 C-10 HAS A 350 TURBO WITH A SHIFT KIT AND A MANUAL VALVE BODY, 12 BOLT REAR END, AND 4:10 GEARS. ( 250 I6 IS WORE OUT AND READY FOR A V-8 TRANSPLANT ) BODY NEADS WORK OF COURSE AND MANY PANELS NEED REPLACING. ALSO HAS 90 MODEL SILVERADO SEAT AND 15X8 4WD RALLY WHEELS ALSO EVERYTHING TO SWAP IT OVER 2 5 LUG DISC BRAKES TOO. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

04-15-2004, 11:24 PM	#13
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	i was looking for a truck a couple of months ago and found one with a big block and air for cheap. i just bought a new 4 wheeler last week. i think if i bring anything else home my woman is going to strangle me. what i would really like to swap it for is a nice set of wheels or some big block parts for my truck. but i doubt anyone has anything like that laying around.

04-15-2004, 11:31 PM	#14
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	what kinda bb parts? __________________ '67 c10 350/th350

04-15-2004, 11:37 PM	#15
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	i`ll be needing an edelbrock intake, 750 or so carb, and aluminum dress up stuff (valve covers etc.)



Register or Log In To remove these advertisements.

04-15-2004, 11:38 PM	#16
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	can you post me a link to the ebay auction? i havent seen any pics of the motor __________________ '67 c10 350/th350

04-15-2004, 11:42 PM	#17
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	i can pull off a lot of stuff on a car but i won`t b.s on a cpu i am almost cpu illiterate. i don`t really know how to do a fancy link on there. i have a hard time shrinking pics to post them...lol...

04-15-2004, 11:43 PM	#18
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	i leave work in 10 minutes and when i get home i will post a pic here on the board.

04-15-2004, 11:45 PM	#19
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	is the motor all assembled and running or is it in pieces? __________________ '67 c10 350/th350

04-15-2004, 11:48 PM	#20
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Here is a link, Highboy - all you have to do is type the number in the Ebay search window, like you would type engine if you were looking for an engine, hope that helps you in the future http://cgi.ebay.com/ebaymotors/ws/eB...tem=2473180370 __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

04-15-2004, 11:49 PM	#21
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	check out the item # on ebay. it`s all there in a rotating assembly. i keep it oiled and in a bag. i rotate it by hand every now and then so it doesn`t seize up any. it will be a runner when it is done. he put all the big money parts in it.

04-16-2004, 12:09 AM	#22
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	man i wish i could think of something worth 650....

04-16-2004, 12:35 AM	#23
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	i've got an aluminum bb intake and stuff but i need a motor that runs already. i dont have time to put it all together __________________ '67 c10 350/th350

04-16-2004, 01:57 AM	#24
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	wth are you talking about? the BB aint for sale...the SB is...

04-16-2004, 01:58 AM	#25
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	yeah but he wants bb parts..... for trade __________________ '67 c10 350/th350

Register or Log In To remove these advertisements.