Need some advice - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BuckeyeBlazer · 07-01-2004, 06:14 PM

I am new to the board and recently purchased a 1972 CST Blazer 4X4

It has quite a bit off underbody rust (rockers, rocker boxes, tub and bed floor) and needs some work. I starting to think I made the wrong decision
I am not going to do any work to it right now, but I recently found 2 wheel drive rust free rolling chassis up in Michigan. I'm going up to Michigan this weekend to look at it.

So this is where i need some advice. He says it is rust free and straight. The underbody and interior have been blasted and coated. (underbody looks clean)
No engine, tranny or transfer case. It has been converted from 4wd to 2wd.
Interior is really rough.
Single wall top.
GMC front clip and tailgate.
He is asking $3500...$3000 without the front clip which I don't need.

How much do you all think it is worth?????

Thanks

bouncytruck · 07-01-2004, 06:47 PM

With no interior or engine and since it is a converted 4wd, I would guess in the $1,500-2,500 range, depending on how much is there. You would basically be buying a tub.

Do you know how the frame was converted to 2wd? Did they keep the leaf springs in the back or go to the trailing arm suspension? Are you thinking about doing a body swap and putting that body on the 4wd frame or fixing up the 2wd? What was it coated with after blasting?

This is just my guess and actual prices may vary in your area.

LUV2XCLR8 · 07-01-2004, 09:20 PM

I Second The Bouncer, U R Mainly Gettin A Tub, It Is Up To U

BuckeyeBlazer · 07-02-2004, 02:07 AM

The underbody was coated with POR15 after it was blasted. I believe it has the original leaf spring still on the back. I attached some photos of the the tub and underbody.

I am undecided on what I would do with it....I would either but the rust free body on my 4x4 chassis or......through my front axle and transfer case back under this new chassis and convert it back to 4 wheel drive. I am not interested in a 2wd blazer. I guess I would just try to part out what ever is remaining.

BuckeyeBlazer · 07-02-2004, 02:22 AM

Sorry...

been double posting the pics....still learning how to use this message board thing.

vtblazer · 07-02-2004, 05:10 AM

Passenger side outer rocker/front door pillar looks kinda interesting...is that a repair? Are the windshield and gasket included? The windshield can be tough to get out with out cutting the gasket...or breaking the glass

Check over the firewall and cowl sides for rust evidence too.
Wanna sell the single wall top if you get it?

HatGuy · 07-02-2004, 05:27 AM

If that is the original seat in the
picture it looks like a rare option
called "Highlander". Looks like the
gray plaid. Mine is blue plaid.It was
made in red/orange and green also.
If you don't want the seat old covers
I will take thaem off your hands for
the plaid inserts.
Joe

http://www.petersbros.com/BLAZER/index.html

Tx Firefighter · 07-02-2004, 07:47 AM

sorry to hijack this post......

Hey Hatguy, if I come down to your place will you take good care of me buying a hat? I don't know exactly what I want, so I need someone patient who will work with me.

donkey69 · 07-02-2004, 04:55 PM

Did someone say tub??

Let me know if you do the deal-I've got a good home for your old one!!!!

LUV2XCLR8 · 07-02-2004, 05:05 PM

I Have A 4wd That Has A Ruff Tub, Good Bed Floor, Good Windsheild
Frame, Lots Of New Parts For The Front Cap, 2 Titles & 2 Vin Tags,
350 Auto Trans. / Np205 Transfer Case, Rally Wheels, 31 Tires That
Are Worn Out, No Top, And No Engine, And It Can Be Urs $1500 Obo

http://67-72chevytrucks.com/vboard/s....php3?t=107495

vtblazer · 07-03-2004, 06:31 AM

I have a rust free tub for sale also.
Just the tub w/gate though, seperated at the weld seam from the firewall.
Have a great firewall too, got a welder?

BuckeyeBlazer · 07-03-2004, 12:20 PM

VT Blazer
Could you send me some information via email on the tub you have for sale. Photos maybe and a price. elenhof@comcast.net
Thanks

vtblazer · 07-03-2004, 12:34 PM

Sure...

Pics away...done, you've got mail

07-01-2004, 06:14 PM	#1
BuckeyeBlazer Registered User Join Date: Dec 2003 Location: Indiana Posts: 41	Need some advice I am new to the board and recently purchased a 1972 CST Blazer 4X4 It has quite a bit off underbody rust (rockers, rocker boxes, tub and bed floor) and needs some work. I starting to think I made the wrong decision I am not going to do any work to it right now, but I recently found 2 wheel drive rust free rolling chassis up in Michigan. I'm going up to Michigan this weekend to look at it. So this is where i need some advice. He says it is rust free and straight. The underbody and interior have been blasted and coated. (underbody looks clean) No engine, tranny or transfer case. It has been converted from 4wd to 2wd. Interior is really rough. Single wall top. GMC front clip and tailgate. He is asking $3500...$3000 without the front clip which I don't need. How much do you all think it is worth????? Thanks Attached Images

07-01-2004, 06:47 PM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	With no interior or engine and since it is a converted 4wd, I would guess in the $1,500-2,500 range, depending on how much is there. You would basically be buying a tub. Do you know how the frame was converted to 2wd? Did they keep the leaf springs in the back or go to the trailing arm suspension? Are you thinking about doing a body swap and putting that body on the 4wd frame or fixing up the 2wd? What was it coated with after blasting? This is just my guess and actual prices may vary in your area. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

07-01-2004, 09:20 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	I Second The Bouncer, U R Mainly Gettin A Tub, It Is Up To U __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-02-2004, 02:07 AM	#4
BuckeyeBlazer Registered User Join Date: Dec 2003 Location: Indiana Posts: 41	The underbody was coated with POR15 after it was blasted. I believe it has the original leaf spring still on the back. I attached some photos of the the tub and underbody. I am undecided on what I would do with it....I would either but the rust free body on my 4x4 chassis or......through my front axle and transfer case back under this new chassis and convert it back to 4 wheel drive. I am not interested in a 2wd blazer. I guess I would just try to part out what ever is remaining. Attached Images

07-02-2004, 05:10 AM	#6
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Tub Passenger side outer rocker/front door pillar looks kinda interesting...is that a repair? Are the windshield and gasket included? The windshield can be tough to get out with out cutting the gasket...or breaking the glass Check over the firewall and cowl sides for rust evidence too. Wanna sell the single wall top if you get it?

07-02-2004, 02:22 AM	#5
BuckeyeBlazer Registered User Join Date: Dec 2003 Location: Indiana Posts: 41	Sorry... been double posting the pics....still learning how to use this message board thing.

07-02-2004, 05:27 AM	#7
HatGuy Registered User Join Date: Aug 2003 Location: Fort Worth Texas Posts: 275	If that is the original seat in the picture it looks like a rare option called "Highlander". Looks like the gray plaid. Mine is blue plaid.It was made in red/orange and green also. If you don't want the seat old covers I will take thaem off your hands for the plaid inserts. Joe http://www.petersbros.com/BLAZER/index.html __________________ Joe Peters the HatGuy 72' K5 Highlander My Daily Driver http://www.pbhats.com/BLAZER/index.html

07-02-2004, 07:47 AM	#8
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	sorry to hijack this post...... Hey Hatguy, if I come down to your place will you take good care of me buying a hat? I don't know exactly what I want, so I need someone patient who will work with me. __________________ I'm on the Instagram- @Gearhead_Kevin

07-02-2004, 04:55 PM	#9
donkey69 JB-80 &quot;Twice as Good&quot; Join Date: Jun 2004 Location: Central, MN Posts: 354	Did someone say tub?? Let me know if you do the deal-I've got a good home for your old one!!!! __________________ HEY NOW!

07-02-2004, 05:05 PM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	I Have A 4wd That Has A Ruff Tub, Good Bed Floor, Good Windsheild Frame, Lots Of New Parts For The Front Cap, 2 Titles & 2 Vin Tags, 350 Auto Trans. / Np205 Transfer Case, Rally Wheels, 31 Tires That Are Worn Out, No Top, And No Engine, And It Can Be Urs $1500 Obo http://67-72chevytrucks.com/vboard/s....php3?t=107495 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 07-02-2004 at 05:08 PM.

07-03-2004, 06:31 AM	#11
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Tub I have a rust free tub for sale also. Just the tub w/gate though, seperated at the weld seam from the firewall. Have a great firewall too, got a welder?

07-03-2004, 12:20 PM	#12
BuckeyeBlazer Registered User Join Date: Dec 2003 Location: Indiana Posts: 41	VT Blazer Could you send me some information via email on the tub you have for sale. Photos maybe and a price. elenhof@comcast.net Thanks

07-03-2004, 12:34 PM	#13
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Tub Sure... Pics away...done, you've got mail Last edited by vtblazer; 07-03-2004 at 12:54 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.