Free stuff to a good home, getting out of trucks. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmanz69 · 11-17-2004, 09:48 PM

I'm getting rid of all my truck stuff. It's free or it's going in the neighbors dumpster. I have vent windows, glass, 2 69-72 fenders that are in good shape, an auto trans cross member. 2 69-72 core supports that could be repaired, a driver side step fender that could be repaired and some small misc parts. If you want it, come get it. It has to be gone by the end of this weekend. I am making room for winter and am tired of kicking this stuff around. I have a 72 high hump cab that could be made nice again for cheap if anyone is interested. I'm in a deal making mood, so come on over and see it. It comes with corners, outer rockers and doglegs all not installed yet. I did do part of the floor already. Please help me find new homes for this stuff. I don't want to junk good parts, but I don't want them anymore. I would rather someon use them. Email or PM me if you are interested in coming by. I should be home all weekend and any night after 5.

P.S. I would really prefer not to ship anything. It's a big hassle for free parts if you know what I mean. If you really want it, come get it.

email: jmanz6@comcast.net
cell: 248-890-8576

Thanks

Jason (jmanz69)

big blue 72 · 11-17-2004, 09:58 PM

Man , i could use that auto tranny crossmember.
would you send it to me if i pay for the ride and your trouble?

jmanz69 · 11-17-2004, 10:01 PM

I might be able to find a way to ship it. I will look around for a box and see. Where is Hamilton OH? Down by Cinci right? I will see what I can come up with.

Kat · 11-17-2004, 11:02 PM

Come on guys somebody got to be near by.I wish it was me! FREE!

big blue 72 · 11-18-2004, 10:13 AM

Thanks jmanz, Hamilton, Ohio 45015. lemme know what you want for it. thanks. virgil

cwilli84 · 11-18-2004, 11:16 AM

Jmanz, I wish I had room to store all of it but maybe some of the smaller stuff if you are just wanting it gone I can take out of your way. I will call you if I can stop by this weekend.

jmanz69 · 11-18-2004, 08:24 PM

Cwilli84,
You can have as much as you can haul away. It's free, take it. If you want to sell it, go ahead. I don't have any use for it anymore. I'm getting tired of kicking it all around. I have lots of small stuff, so you could have a ton of stuff to use or sell on ebay. I just don't have the energy to do it. I have a new project and am working on it this winter. Hope to hear from you.

Jason

RIDDLA · 11-18-2004, 11:14 PM

how about any heater controls?

jmanz69 · 11-18-2004, 11:20 PM

No heater controls, mostly just sheet metal. Some odds and ends, but not much really interesting on that end. I have a bunch of big stuff that needs to be moved. If it were all small stuff I would sell it. Sheet metal is hard to sell since it's hard to ship. I won't ship it, so it's even harder. Now it has to go. My 240Z is wanting more room in the garage.

Brainchild · 11-18-2004, 11:22 PM

If I was closer I'd just load it all up,but I guess I'll just have to bump

RIDDLA · 11-18-2004, 11:30 PM

Thanks what kind of small parts? if it aint to much trouble Riddla

red71cheyenne · 11-18-2004, 11:51 PM

He's holding the vent windows for me if someone could ship them, I would pay. I'm too far away to get them myself. Help!!!! Jeff.

aesj2 · 11-19-2004, 12:49 AM

I am just down the road from you. I would like to stop by to see what you got. I work 2nd shift so the weekend is best for me. I will call you to set up a time.

jmanz69 · 11-19-2004, 02:39 PM

No problem, come on by. PM me and I'll send you my address. Mapquest is the best for directions to my house. Waterford is a pain to navigate with all the lakes and such. I should be home all weekend. I have a ton of stuff to go. Bring a truck!!

jmanz69 · 11-19-2004, 09:52 PM

I found some parts I powder coated and forgot about. Also found a proportional valve for disc brakes, alt bracket for a short water pump I had powder coated chrome (looks more like polished aluminum), a bunch of dash gauges and parts, some upper control arms, side glass and a back glass (non tinted), some manual trans parts, a iron bellhousing and clutch fork, some stainless trim for around the back glass, a window regulator, a intermediate steering shaft for a manual gearbox, 2 outer heater boxes (non A/C), and a bunch of other stuff. Come out and take it home please. The more you take, the less I have to haul away.

toddtheodd · 11-20-2004, 10:27 AM

Posi for a 12 bolt?

jmanz69 · 11-20-2004, 10:39 AM

Had one, but I sold it. Besides, you're too far away to come get it...

jmanz69 · 11-20-2004, 04:55 PM

Some stuff is gone. Thanks cwilli84! I still have some good parts left. I found 2 cowl covers, a passenger side 69-72 front fender, two repairable 69-72 core supports, a passenger side step fender, and good passenger side step, a pair of nice step braces, a box of wire harnesses, a bunch of dash gauges and bezels, some glass, etc. Come and get it you local guys. I WILL NOT SHIP THIS STUFF, if you want it come get it.

toddtheodd · 11-20-2004, 05:25 PM

Quote:

Had one, but I sold it.

Darn!

Quote:

Besides, you're too far away to come get it...

Never assume. I work for a food distribution company that has a lot of trucks and goes really really far away.

Todd

jmanz69 · 11-20-2004, 05:29 PM

If you can send someone up to get stuff, I have no problem. I have been emailed a lot from people far away asking me to ship stuff. I had it for sale for 2 months and no one wanted to pay for it, now people are offering to pay for shipping and the effort. It's not worth the effort now. I just want it all gone.

11-17-2004, 09:48 PM	#1
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	Free stuff to a good home, getting out of trucks. I'm getting rid of all my truck stuff. It's free or it's going in the neighbors dumpster. I have vent windows, glass, 2 69-72 fenders that are in good shape, an auto trans cross member. 2 69-72 core supports that could be repaired, a driver side step fender that could be repaired and some small misc parts. If you want it, come get it. It has to be gone by the end of this weekend. I am making room for winter and am tired of kicking this stuff around. I have a 72 high hump cab that could be made nice again for cheap if anyone is interested. I'm in a deal making mood, so come on over and see it. It comes with corners, outer rockers and doglegs all not installed yet. I did do part of the floor already. Please help me find new homes for this stuff. I don't want to junk good parts, but I don't want them anymore. I would rather someon use them. Email or PM me if you are interested in coming by. I should be home all weekend and any night after 5. P.S. I would really prefer not to ship anything. It's a big hassle for free parts if you know what I mean. If you really want it, come get it. email: jmanz6@comcast.net cell: 248-890-8576 Thanks Jason (jmanz69) Last edited by jmanz69; 11-17-2004 at 10:02 PM.

11-17-2004, 11:02 PM	#4
Kat Registered User Join Date: Oct 2004 Location: Sapulpa,OK. Posts: 77	Free Come on guys somebody got to be near by.I wish it was me! FREE!

11-18-2004, 11:16 AM	#6
cwilli84 1FINE69 Join Date: Aug 2003 Location: Detroit, Michigan Posts: 239	Jmanz, I wish I had room to store all of it but maybe some of the smaller stuff if you are just wanting it gone I can take out of your way. I will call you if I can stop by this weekend. __________________ Had a 69 swb fleetside 350zz3 w 400turbo trans oak lined bed with rhino coated sides red exterior. SOLD

11-18-2004, 11:14 PM	#8
RIDDLA Registered User Join Date: Aug 2002 Location: Santa Fe NM Posts: 393	how about any heater controls? __________________ 68 GMC-Stripshow 70 Chevy Monte Carlo 72 Chevy Monte Carlo LOLO 72 Chevy Suburban Blurban 74 Vw Bug 78 Chevy k10 lwb 78 Chevy k10 swb 03 Cadillac Escalade-Duecesix 84 Cadillac Coupe Deville DeElegance B.O. A Lifestyle Money Cant Buy! Win,Lose, or Tie I'm a Raider till i die

11-18-2004, 11:22 PM	#10
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	If I was closer I'd just load it all up,but I guess I'll just have to bump __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

11-17-2004, 09:58 PM	#2
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	Man , i could use that auto tranny crossmember. would you send it to me if i pay for the ride and your trouble?

11-17-2004, 10:01 PM	#3
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	I might be able to find a way to ship it. I will look around for a box and see. Where is Hamilton OH? Down by Cinci right? I will see what I can come up with.

11-18-2004, 10:13 AM	#5
big blue 72 Senior Member Join Date: May 2002 Location: hamilton,ohio,usa Posts: 1,499	Thanks jmanz, Hamilton, Ohio 45015. lemme know what you want for it. thanks. virgil

11-18-2004, 08:24 PM	#7
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	Cwilli84, You can have as much as you can haul away. It's free, take it. If you want to sell it, go ahead. I don't have any use for it anymore. I'm getting tired of kicking it all around. I have lots of small stuff, so you could have a ton of stuff to use or sell on ebay. I just don't have the energy to do it. I have a new project and am working on it this winter. Hope to hear from you. Jason

11-18-2004, 11:20 PM	#9
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	No heater controls, mostly just sheet metal. Some odds and ends, but not much really interesting on that end. I have a bunch of big stuff that needs to be moved. If it were all small stuff I would sell it. Sheet metal is hard to sell since it's hard to ship. I won't ship it, so it's even harder. Now it has to go. My 240Z is wanting more room in the garage.

11-18-2004, 11:30 PM	#11
RIDDLA Registered User Join Date: Aug 2002 Location: Santa Fe NM Posts: 393	Thanks what kind of small parts? if it aint to much trouble Riddla __________________ 68 GMC-Stripshow 70 Chevy Monte Carlo 72 Chevy Monte Carlo LOLO 72 Chevy Suburban Blurban 74 Vw Bug 78 Chevy k10 lwb 78 Chevy k10 swb 03 Cadillac Escalade-Duecesix 84 Cadillac Coupe Deville DeElegance B.O. A Lifestyle Money Cant Buy! Win,Lose, or Tie I'm a Raider till i die

11-18-2004, 11:51 PM	#12
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	He's holding the vent windows for me if someone could ship them, I would pay. I'm too far away to get them myself. Help!!!! Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

11-19-2004, 12:49 AM	#13
aesj2 Registered User Join Date: Feb 2002 Location: Ferndale, Michigan, USA Posts: 94	I am just down the road from you. I would like to stop by to see what you got. I work 2nd shift so the weekend is best for me. I will call you to set up a time.

11-19-2004, 02:39 PM	#14
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	No problem, come on by. PM me and I'll send you my address. Mapquest is the best for directions to my house. Waterford is a pain to navigate with all the lakes and such. I should be home all weekend. I have a ton of stuff to go. Bring a truck!!

11-19-2004, 09:52 PM	#15
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	I found some parts I powder coated and forgot about. Also found a proportional valve for disc brakes, alt bracket for a short water pump I had powder coated chrome (looks more like polished aluminum), a bunch of dash gauges and parts, some upper control arms, side glass and a back glass (non tinted), some manual trans parts, a iron bellhousing and clutch fork, some stainless trim for around the back glass, a window regulator, a intermediate steering shaft for a manual gearbox, 2 outer heater boxes (non A/C), and a bunch of other stuff. Come out and take it home please. The more you take, the less I have to haul away.



Register or Log In To remove these advertisements.

11-20-2004, 10:27 AM	#16
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	Posi for a 12 bolt?

11-20-2004, 10:39 AM	#17
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	Had one, but I sold it. Besides, you're too far away to come get it...

11-20-2004, 04:55 PM	#18
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	Some stuff is gone. Thanks cwilli84! I still have some good parts left. I found 2 cowl covers, a passenger side 69-72 front fender, two repairable 69-72 core supports, a passenger side step fender, and good passenger side step, a pair of nice step braces, a box of wire harnesses, a bunch of dash gauges and bezels, some glass, etc. Come and get it you local guys. I WILL NOT SHIP THIS STUFF, if you want it come get it.

11-20-2004, 05:29 PM	#20
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	If you can send someone up to get stuff, I have no problem. I have been emailed a lot from people far away asking me to ship stuff. I had it for sale for 2 months and no one wanted to pay for it, now people are offering to pay for shipping and the effort. It's not worth the effort now. I just want it all gone.

Register or Log In To remove these advertisements.