Carpet done - seats ready to be bolted down - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Yukon Jack** · 04-13-2005, 09:36 AM

I got the carpet finished last night and am very pleased with it. Bolting down the shifter retainers helped get rid of a couple wrinkles. I still need to cut the kick panel vent holes and secure the panel that I made for the rear of the cab where the gas tank was.

It was late when I got done but I had to set the seats in before I called it quits. They can be bolted down next time I am out.

You can hardly tell I have brackets under the carpet and insulation to assist with mounting these seats.

Truck is getting awfully dusty - need to get it done!

GreyHoundSteve · 04-13-2005, 09:47 AM

looks good.

oj70chevy · 04-13-2005, 09:53 AM

nice job.

Putter · 04-13-2005, 10:03 AM

Ohhhh. Nice. Where did you get the carpet....and what did it run ya'?

70c10 · 04-13-2005, 10:10 AM

Lookin' good!

**Yukon Jack** · 04-13-2005, 10:10 AM

Carpet is from Tim Christian - I haven't seen the bill yet but I believe it is around $120 but don't quote me on that.

I will have to pull the 4 speed shifter and put a slight bend in it. When in reverse it hits the middle seat. Can get in reverse but if there was a passenger you would have problems.

**Palf70Step** · 04-13-2005, 12:39 PM

Looking very nice Yukon!

TP from Cntl PA · 04-13-2005, 04:47 PM

Awesome! I have those very same GM seats I am putting in mine............But that is like a Carrot........I am not installing them until everything else is DONE

**Yukon Jack** · 04-14-2005, 10:12 AM

I think you will like the seats TP from Cntl PA but they do make the interior a bit more cramped.

Thanks for all the compliments - getting so close to being driveable and getting the interior about finished is a nice step forward. Never thought I would bother with carpet but it sure gives the cab a finished look. Now if I can just keep my muddy boots out of it.

meathead95 · 04-14-2005, 10:19 AM

the first pic looks like their is no leg room at all

**Yukon Jack** · 04-14-2005, 10:28 AM

Definitely a tighter fit. Here are a couple pics I took a while ago with me in the seat. I'm right at 6' - some one taller than that or with long legs will want to really give some thought to whether to change to this style of seat.

dubie · 04-14-2005, 10:43 AM

Damn Mark, it sure doesn't look like the farm truck ya started out with a few years back

Looking pretty damn cool!! Can ya hear that little voice in your head saying " are ya done yet?" I heard that little bugger way to often when I was doing mine

**Yukon Jack** · 04-14-2005, 10:46 AM

I hear voices in my head all the time asking "Why aren't you done yet?"

I laughed at myself when I was in the cab the night I got the seats in cause I was making vroom vroom noises when I was going through the gears.

Bill72BB · 04-14-2005, 10:59 AM

YJ, Looks good ,

I was just searching some site's for carpet for BB that is one of the things I still need to replace .

Edmond · 04-14-2005, 11:50 AM

That looks amazing.
Nice color on the truck by the way. Looks Good!!

Cya,
Edmond

stickshift_or_walk · 04-14-2005, 12:37 PM

Lookin' sharp. I caught my boy doin' the vroom, vroom thing last Saturday, but before the day was out, he was doing it for real, toolin' around the pasture!

Open manifolds, no fenders or doors, but finally mobile!

That color scheme looks better to me with each new pic, and the carpet and seat really work well.

SSOW

69 Short Fleet · 04-14-2005, 12:46 PM

Looks good Yukon!!!

04-13-2005, 09:36 AM	#1
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Carpet done - seats ready to be bolted down I got the carpet finished last night and am very pleased with it. Bolting down the shifter retainers helped get rid of a couple wrinkles. I still need to cut the kick panel vent holes and secure the panel that I made for the rear of the cab where the gas tank was. It was late when I got done but I had to set the seats in before I called it quits. They can be bolted down next time I am out. You can hardly tell I have brackets under the carpet and insulation to assist with mounting these seats. Truck is getting awfully dusty - need to get it done! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 11:13 AM.

04-13-2005, 09:53 AM	#3
oj70chevy 250 V-6 Club Join Date: Feb 2005 Location: San antonio, TX. Posts: 898	nice job. __________________ 1970 Chevy C/10 6 Cyl. 43k original miles all factory .http://67-72chevytrucks.com/vboard/s...d.php?t=197523 Never ask a stupid question unless you want a stupid answer .

04-13-2005, 10:03 AM	#4
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Ohhhh. Nice. Where did you get the carpet....and what did it run ya'? __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

04-13-2005, 10:10 AM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Lookin' good! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-13-2005, 10:10 AM	#6
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Carpet is from Tim Christian - I haven't seen the bill yet but I believe it is around $120 but don't quote me on that. I will have to pull the 4 speed shifter and put a slight bend in it. When in reverse it hits the middle seat. Can get in reverse but if there was a passenger you would have problems. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

04-13-2005, 09:47 AM	#2
GreyHoundSteve Registered User Join Date: Oct 2004 Location: DFW TX Posts: 769	looks good.

04-13-2005, 12:39 PM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,725	Looking very nice Yukon! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-13-2005, 04:47 PM	#8
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	Awesome! I have those very same GM seats I am putting in mine............But that is like a Carrot........I am not installing them until everything else is DONE __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

04-14-2005, 10:12 AM	#9
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	I think you will like the seats TP from Cntl PA but they do make the interior a bit more cramped. Thanks for all the compliments - getting so close to being driveable and getting the interior about finished is a nice step forward. Never thought I would bother with carpet but it sure gives the cab a finished look. Now if I can just keep my muddy boots out of it. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

04-14-2005, 10:19 AM	#10
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	the first pic looks like their is no leg room at all __________________ 72 2wd blazer 72 swb 4x4

04-14-2005, 10:28 AM	#11
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Definitely a tighter fit. Here are a couple pics I took a while ago with me in the seat. I'm right at 6' - some one taller than that or with long legs will want to really give some thought to whether to change to this style of seat. Attached Images __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

04-14-2005, 10:43 AM	#12
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	Damn Mark, it sure doesn't look like the farm truck ya started out with a few years back Looking pretty damn cool!! Can ya hear that little voice in your head saying " are ya done yet?" I heard that little bugger way to often when I was doing mine __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

04-14-2005, 10:46 AM	#13
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	I hear voices in my head all the time asking "Why aren't you done yet?" I laughed at myself when I was in the cab the night I got the seats in cause I was making vroom vroom noises when I was going through the gears. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

04-14-2005, 10:59 AM	#14
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	YJ, Looks good , I was just searching some site's for carpet for BB that is one of the things I still need to replace . __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

04-14-2005, 11:50 AM	#15
Edmond Registered User Join Date: Jan 2000 Location: The Netherlands Posts: 1,062	That looks amazing. Nice color on the truck by the way. Looks Good!! Cya, Edmond __________________ 1971 Chevy C/20 Longhorn, 350/TH400, Edelbrock Performer, IMPCO 425 LPG Carb 1974 Chevy Camaro Z28 (Original) ------------------------- Capelle a/d IJssel, The Netherlands



Register or Log In To remove these advertisements.

04-14-2005, 12:37 PM	#16
stickshift_or_walk Left Foot Functioning Join Date: May 2004 Location: Duncan, OK Posts: 348	Lookin' sharp. I caught my boy doin' the vroom, vroom thing last Saturday, but before the day was out, he was doing it for real, toolin' around the pasture! Open manifolds, no fenders or doors, but finally mobile! That color scheme looks better to me with each new pic, and the carpet and seat really work well. SSOW __________________ 69 C10 (#1 son's ride) 72 C20 (Dad's farm truck) 82 K30 (Ex - brush pumper project)

04-14-2005, 12:46 PM	#17
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Looks good Yukon!!!

Register or Log In To remove these advertisements.